Trinity College Dublin the University of Dublin_336DublinTED
High-Resolution Particle and Cell Sizing, Counting and Distribution Device
The system must be a benchtop instrument able to measure particles concentration and size profile in biological and other liquid samples as small as 200 nm without additional processing (i.e. operate using the coulter principle or equivalent and be able to measure large protein aggregates, blood platelets and characterise mammalian cells ...
Typ: Ausschreibung
Messtechnik, Laborinstrumente
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Trinity College Dublin the University of Dublin_336
- Veröffentlicht:
- 31. August 2026
- Frist:
- Nicht angegeben
- Thema:
- Messtechnik
Ausschreibungsbeschreibung
Vollständige Beschreibung anzeigenBeschreibung einklappen
The system must be a benchtop instrument able to measure particles concentration and size profile in biological and other liquid samples as small as 200 nm without additional processing (i.e. operate using the coulter principle or equivalent and be able to measure large protein aggregates, blood platelets and characterise mammalian cells or spheroids without the need of using nucleus staining). It must deliver accurate, reproducible size and concentration measurements across 0.2–1,600 μm in samples of 10-2000 µL, support volumetric flow mode, data reprocessing and ISO 9276-1 reporting. The instrument must feature user-friendly software, mercury-free metering, robust quality control, and be EU Annex 11 of the Good Manufacturing Practice (GMP) Guideline compliant and or FDA 21 CFR Part 11 compliant.
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
7 Datenbereiche verfügbar
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Unterlagen
Freischalten50 Angaben erfasstUnterlagen · Dokumentenpaket
Auftraggeber
Freischalten3 Angaben erfasstAuftraggeber · Anschrift · Kontakt
Lose
Freischalten1 Angabe erfasstLose LOT-0001
Verfahrensdaten
Freischalten5 Angaben erfasstBekanntmachungsnummer · Verfahrensreferenz · Verfahrensart · Auftragsart · +1 weitere
Ausführungsorte
Freischalten2 Angaben erfasstAusführungsorte
Bieter und Auftragnehmer
Freischalten3 Angaben erfasstBieter und Auftragnehmer · Anschrift · Kontakt
Veröffentlichungsstelle
Freischalten3 Angaben erfasstVeröffentlichungsstelle · Anschrift · Kontakt
Ähnliche Bekanntmachungen
10Microscale thermophoresis device
Oulun yliopistoOULUFrist: 09. Okt.University of Oulu, Biocenter Oulu, seeks a spectral shift and microscale thermophoresis device to characterise qualitatively and determine quantitatively nanoparticle, including protein, interactions in the range of weak to tight binders in solution without immobilization (hereinafter referred to as the "device"). The device must enable the assessment of sample quality and aggregation and differentiating binding events from aggregation. The device will be used for analysis of interactions of fluorescence labelled proteins with small molecules and vesicles. The detection must be independent of the mass ratio of the binding partners. The device must enable fast screening of interactions as well as sensitive affinity measurement. The measurable dynamic range of dissociation constant must be at least in nM -mM range and binding affinity in at least nM -mM range. Low sample consumption (in order of 10 microlitre) and low nanomole of the labeled target is needed for the measurement. The device must enable detection of the interaction based on changes of emission spectrum of exited fluorophore under isothermal conditions and must be able to create a microscopic non-isothermal temperature field (temperature gradient) and determine nanoparticle including protein binding events based on the temperature related intensity change and fluorescence intensity change following thermophoresis under the thermal gradient. Intensity changes and/or spectrum shifts of the fluorescence probe versus ligand concentrations are measured and plotted to calculate the dissociation constant. The device must come with detailed documentation of all features. The device will be part of the Proteomics and protein analysis core facility infrastructure of Biocenter Oulu. The core facility has an open access policy, and the instrumentation and software must be easy to use and maintain. The device must include a user interface to control the operation. The device must be well suited to an academic multi-Enhancing Weather and Climate Data Management Innovation in Tajikistan through an AI and Observation-Based High-Resolution Data Management Platform.
UN SecretariatKenyaFrist: 05. Sept.The United Nations Office at Nairobi (UNON), on behalf of the Climate Technology Centre and Network (CTCN) of the United Nations Environment Programme (UNEP), invites qualified and interested firms to submit an Expression of Interest (EOI) to participate in an upcoming solicitation for the provision of technical assistance for Enhancing Weather and Climate Data Management Innovation in Tajikistan through AI and Observation-Based High-Resolution Data Management Platform. United Nations Environment Programme (UNEP), on behalf of CTCN, seeks to engage a qualified consulting firm to provide the technical assistance requested and endorsed by the National Designated Entity (NDE) of Tajikistan. The objective of this assignment is to enhance Tajikistan’s climate resilience by developing and piloting an AI-enabled climate data management and quality control system that integrates ground-based and satellite observations, and by strengthening institutional capacity to generate and use reliable climate information for climate-informed decision-making. Tajikistan is highly vulnerable to climate change due to its dependence on glacier-fed hydrological systems. The country has already lost approximately 30% of its glacier area since 1930, with projections indicating further losses of 15–20% by 2050. Rising temperatures, increasing frequency of extreme weather events, and water stress are intensifying risks across the water–energy–food nexus. Water-related hazards account for over 70% of natural disasters and cause economic losses of up to 1.4% of GDP annually. Despite these risks, Tajikistan lacks high-resolution, real-time climate data necessary for effective water resource management, disaster risk reduction, and climate adaptation. Current hydrometeorological systems rely heavily on sparse ground observations with limited integration of satellite-based data and advanced analytics. Institutional and technical constraints further limit the capacity of the national hydrometeorological agency to deliver accurate forecasts and actionable climate information. As a result, critical decision-making processes such as reservoir management, irrigation planning, flood forecasting, and early warning systems are constrained by incomplete and unreliable data, reducing the effectiveness of climate risk management for government institutions and vulnerable communities exposed to glacier-related and hydrological hazards. Expected Outputs include: 1. Project Management (Mandatory Output). 2. Inception, National Climate Data Management and AI Integration Framework Developed. 3. AI-Based Climate Data Quality Control Pilot Implemented. 4. Capacity Building and Institutional Strengthening Delivered. 5. Scale-up Roadmap, Sustainability Strategy and Investment Pathways Developed. Detailed requirements will be provided in the solicitation documents to be issued following the closure of this REOI. Note: At this REOI stage, it is sufficient to click on the 'Express Interest' button in UNGM and no documentation is required. Specific Requirements/Information The Climate Technology Centre and Network (CTCN) is the Operational arm of The United Nations Framework Convention on Climate Change (UNFCCC) and hosted by United Nations Environment Programme (UNEP). The mission of the CTCN is to promote accelerated development and transfer of climate technologies at the request of developing countries for energy-efficient, low-carbon and climate-resilient development. CTCN provides technical assistance to the countries using its own funds ( which it receives through voluntary contributions of donor) or through the other funding sources specifically the Green Climate Funds (GCF) through the Readiness Programme. The requests for Technical Assistance (TA) are submitted to the CTCN by the National Designated EnHydrophones, acoustic release transponders and a command and control unit for the transponders
LuonnonvarakeskusHelsinkiFrist: 04. Sept.Please note that this is a prior infromation notice and this notice is not a call for tenders. The information provided in this notice is preliminary and may change as the preparation progresses. The Natural Resources Institute Finland (Luke) is planning to purchase hydrophones, acoustic release transponders and a command and control unit for the transponders. Hydrophones are needed for research conducted on aquatic mammals to record their underwater calls and the surrounding underwater soundscape. The specific requirements for the hydrophones are: • Low power consumption, very low self-noise and 60 kHz bandwidth • Long battery endurance lasting up to 160 days • Must be able to provide up to 2 TB of removable data storage • Recording bandwidth of 20 Hz – 60 kHz • Sample rate of up to 192 kS/sec • Must provide a durable titanium housing • Must contain a removable protective hydrophone cage • Must be able to operate in depths of several hundred meter - up to 500 m depth rating • Must be suitable for up to 1 year deployments In addition, the hydrophones cannot be retrieved from depths by diving; thus, a remote release mechanism that brings the hydrophone up to the water surface is needed to accompany the hydrophone. The requirements for the release transponders are: • Must be compatible with the hydrophone type used in the project • >13 months deployment with alkaline battery pack • Integrated inclinometer • Uses a storage mode eliminating power consumption when not in use • Reliable, 'screw-off' release • Rugged, compact design • Working Load Limit of 150 kg • Depth rated to 1,000 m Further, a topside command and control unit is required to control and operate the release transponders. It should have the following requirements: • Must be robust and portable • Must communicate with release transponder RT 6-1000 from the surface • Must be able to operate in harsh marine environments. • High brightness, resistive touch screen display is required • Must come with an easy-LA3790C - FSI - CFT - Open (OJEU) Procedure for the Supply of an Automated Thermal Desorber Gas Chromatograph Mass Spectrometer (ATD-GCMS)
Education Procurement Service (EPS)LimerickFrist: 25. Sept.Tenders are sought for the Supply, Delivery, Installation and Commissioning of an Automated Thermal Desorber coupled with a Gas Chromatograph Mass Spectrometry (ATD-GCMS) for the analysis of ignitable liquids in vapour samples. This will be an addition to the current ATD-GCMS in the Fires team of the Chemistry department to be able to deal with the volume of fire cases submitted to FSI. Materials submitted for analysis ignitable liquids include debris samples taken from a fire scene, clothing taken from suspects or victims, or any other solid sample where it is desired to determine whether or not there are ignitable liquids associated with it. Such samples are submitted to the Laboratory in sealed nylon bags. The customer need is for FSI to determine accurately, reliably and to an acceptable level of sensitivity whether or not such exhibits contain ignitable liquids.Fast 3D live cell imaging microscope
Tampere University Foundation srTampereFrist: 28. Sept.Tampere University Foundation sr (hereinafter referred to as ”Customer” or ”Contracting Authority”) requests a tender in accordance with the contract notice published on the Hilma notice channel and this call for tenders and its appendices for Fast 3D live cell imaging microscope (hereinafter referred to as "System" or "Device"). The device is intended for fluorescence imaging of live cells, model organisms, and 3D cell cultures. The device incorporates novel technology that enables imaging using low excitation light intensities. The device must comply with the system minimum requirements set out in the Call for Tenders including microscope body minimum requirements, fast 3D imaging minimum requirements and software and computer minimum requirements. The procurement includes delivery of the device to Tampere University’s Kauppi campus, installation, commissioning, user training, technical support, warranty, and the availability of maintenance services. Further details of the requirements are provided in the “Procurement Object Criteria” section of this Call for Tenders. Price ceiling: The tender price must be less than or equal to 514 000 EUR excluding VAT. Further information is provided in Annex 1 "Price and quality form". One (1) supplier will be selected and awarded the contract. The procurement contract draft can be found as Annex 2. The agreement period begins with the signing of the contract, and it is valid until the contractual obligations have been fulfilled. The contract does not grant the selected supplier exclusive rights to the subject matter of the procurement.Solar Simulator
Freistaat Bayern, vertreten durch die Friedrich-Alexander-Universität Erlangen-NürnbergErlangenThis call for bids concerns the supply of a solar simulator that produces the solar spectrum for applications in photoelectrochemistry, photocatalysis, and photovoltaic research. The system must be capable of both standalone operation and integration with a scanning probe microscope via a fiber optic coupling. The solar simulator must enable controlled photo-irradiation of samples from multiple directions (with respect to the samples), including top, lateral, and bottom illumination. This capability is required to support a wide range of experimental configurations.Ge-detector
Helmholtz-Zentrum Dresden-Rossendorf e.V.DresdenFrist: 15. Sept.A multi-element detector with high purity Germanium discrete pixel array is to be procured for the spectroscopy measurement station at the Rossendorf beamline (ROBL) in 38043 Grenoble Cedex 9, France. The detector is primarily intended for use in • X-ray absorption spectroscopy (XAS/XANES/EXAFS) in fluorescence detection geometry with a high solid angle • X-ray fluorescence spectroscopy (XRF) on samples containing light and heavy elements, including f-block compounds (lanthanides, actinides) The detector should be designed for operation under conditions involving high-flux synchrotron radiation, enabling research in the field of f-element chemistry and speciation analysis (lanthanides, actinides), as well as environmental and geochemical sample characterization. In particular, operation in the hard X-ray range of 5-30keV, a high count rate per element, and other requirements as specified below make it possible to measure even the lowest concentrations for this type of experiment. Beside the fulfillment of the criteria described under 2. Performance quote of this Annex A, the scope of deliveries and services includes (and will be included in the offer): - 12 month warranty - SAT at the place of installation - delivery and installation location/ place of performance: Helmholtz-Zentrum Dresden-Rossendorf e.V (Location: Grenoble) c/o European Synchrotron ESRF 71 Avenue des Martyrs 38000 Grenoble FRANCE VAT ID: FR87914311840 - condition of delivery: DDP/ DAP (Incoterms 2020) to the place of performance - technical data sheet, maintenance schedule - manual in German and/ or EnglischDeposition Tool 8 Inch
Freistaat Bayern vertreten durch die Technische Universität München, hier handelnd die Forschungs-Neutronenquelle Heinz Maier-Leibnitz (FRM II)GarchingFrist: 05. Okt.The Technical University of Munich - Chair of Technical Physics E23/WMI will acquire a UHV cluster System for the fabrication of superconducting circuits on 8 inch'' wafers. The system must provide UHV conditions and has to include an HV load-lock chamber, a central handling chamber, a UHV chamber for the evaporation of Al thin films, a UHV chamber for sputtering of superconductors, a UHV chamber for oxidation, a UHV chamber for Ar ion milling, and a flipping station. The system must allow metalizing both sides of the wafers in situ, with minimal backside particle contamination. The wafers should only be touched on the side (edge gripping).042-26 RMC Großrahmenschergerät 300 x 300 mm inkl. Zubehör
Hochschule Koblenz RMCFrist: 03. Sept.. Sehr geehrte Damen und Herren. . Wir beabsichten die Beschaffung folgender Leistung: . 1 Stück Großrahmenschergerät 300 x 300 mm inkl. Zubehör . . Ausführliche Informationen finden sie in der Leistungbeschreibung, welche als Download zu Verfügung steht. .Beschaffung Temperaturschrank
Technische Universität Berlin - Zentrale Beschaffung - Operativer EinkaufBerlinFrist: 03. Sept.Lieferleistung - Beschaffung Temperaturschrank laut Angaben in der Leistungsbeschreibung unter Beachtung der Vergabeunterlagen.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Trinity College Dublin the University of Dublin_336.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.