Tampere University Foundation srTampereTED
Fast 3D live cell imaging microscope
Tampere University Foundation sr (hereinafter referred to as ”Customer” or ”Contracting Authority”) requests a tender in accordance with the contract notice published on the Hilma notice channel and this call for tenders and its appendices for Fast 3D live cell imaging microscope (hereinafter referred to as "System" or "Device"). The devi...
Angebotsfrist: 28. September 2026Typ: Ausschreibung
Laborinstrumente
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Tampere University Foundation sr
- Veröffentlicht:
- 30. August 2026
- Frist:
- 28. September 2026
- Thema:
- Laborinstrumente
Ausschreibungsbeschreibung
Vollständige Beschreibung anzeigenBeschreibung einklappen
Tampere University Foundation sr (hereinafter referred to as ”Customer” or ”Contracting Authority”) requests a tender in accordance with the contract notice published on the Hilma notice channel and this call for tenders and its appendices for Fast 3D live cell imaging microscope (hereinafter referred to as "System" or "Device"). The device is intended for fluorescence imaging of live cells, model organisms, and 3D cell cultures. The device incorporates novel technology that enables imaging using low excitation light intensities. The device must comply with the system minimum requirements set out in the Call for Tenders including microscope body minimum requirements, fast 3D imaging minimum requirements and software and computer minimum requirements. The procurement includes delivery of the device to Tampere University’s Kauppi campus, installation, commissioning, user training, technical support, warranty, and the availability of maintenance services. Further details of the requirements are provided in the “Procurement Object Criteria” section of this Call for Tenders. Price ceiling: The tender price must be less than or equal to 514 000 EUR excluding VAT. Further information is provided in Annex 1 "Price and quality form". One (1) supplier will be selected and awarded the contract. The procurement contract draft can be found as Annex 2. The agreement period begins with the signing of the contract, and it is valid until the contractual obligations have been fulfilled. The contract does not grant the selected supplier exclusive rights to the subject matter of the procurement.
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
7 Datenbereiche verfügbar
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Unterlagen
Freischalten50 Angaben erfasstUnterlagen · Dokumentenpaket
Auftraggeber
Freischalten3 Angaben erfasstAuftraggeber · Anschrift · Kontakt
Lose
Freischalten1 Angabe erfasstLose LOT-0000
Verfahrensdaten
Freischalten6 Angaben erfasstBekanntmachungsnummer · Verfahrensreferenz · Referenz des Auftraggebers · Verfahrensart · +2 weitere
Ausführungsorte
Freischalten3 Angaben erfasstAusführungsorte
Bieter und Auftragnehmer
Freischalten3 Angaben erfasstBieter und Auftragnehmer · Anschrift · Kontakt
Veröffentlichungsstelle
Freischalten3 Angaben erfasstVeröffentlichungsstelle · Anschrift · Kontakt
Ähnliche Bekanntmachungen
10Multimode plate reader with live cell imaging functionality for Trinity College Dublin
Trinity College Dublin the University of Dublin_336DublinTenders are sought for the Supply, Delivery, Installation and Commisioning of a Multimode plate reader with live cell imaging functionality for Trinity College Dublin (TCD). The multimode plate reader must support diverse plate-based assays such as ELISA, calcium kinetics, and fluorescence polarization, combining multimode detection with advanced live cell imaging. It should handle multiple plate formats, from 96-well plates to microscope slides, for flexible and efficient experimentation.26/00896 Cell microscope
HavforskningsinstituttetBERGENThis competition is for the procurement of an inverted microscope that can run routine analyses of cultivated cells. This particularly applies to automatic counting of cells, the proportion of dead cells and morphological changes of cells. An inverted microscope is therefore necessary. There will be many users of the instrument, with different uses and expertise. It is important that the user interface is educational and that the system has KI functions that facilitate the analyses. It is also important that larger objects such as fish larvae (up to 2.5 cm) can be analysed, as well as histological slides. Therefore, we need to have connectivity options to the extra colour camera. We plan to replace the current confocal scanner for use on this instrument at a later date.Elemental Analyzer-Isotope Ratio Mass Spectrometer (EA-IRMS) and entry-level Elemental Analyzer (EA)
University of JyväskyläJyväskylän yliopistoUniversity of Jyväskylä (JYU) is inviting tenders for an Elemental Analyzer-Isotope Ratio Mass Spectrometer (EA-IRMS) and for an entry-level Elemental Analyzer (EA) devices. EA-IRMS device shall be a fully automated single system for carbon, nitrogen, and sulphur analysis by flash combustion, and oxygen and hydrogen analysis by high temperature pyrolysis (reduction). The subject of the procurement is an EA-IRMS for the high-precision measurement of carbon (C), nitrogen (N), sulphur (S), oxygen (O) and hydrogen (H) isotope ratios (i.e., δ13C, δ15N, δ34S, δ18O and δ2H values) in solid environmental matrices. The device will primarily be used for the analysis of carbon, nitrogen, and sulphur. The instrument is to be optimized for continuous flow operation, but includes also a connection(s) for low flow peripherals. A separate Entry-level elemental analyzer (EA) for carbon, hydrogen and nitrogen (CHN) analysis of solid environmental matrices is also included in the procurement.Microscale thermophoresis device
Oulun yliopistoOULUFrist: 09. Okt.University of Oulu, Biocenter Oulu, seeks a spectral shift and microscale thermophoresis device to characterise qualitatively and determine quantitatively nanoparticle, including protein, interactions in the range of weak to tight binders in solution without immobilization (hereinafter referred to as the "device"). The device must enable the assessment of sample quality and aggregation and differentiating binding events from aggregation. The device will be used for analysis of interactions of fluorescence labelled proteins with small molecules and vesicles. The detection must be independent of the mass ratio of the binding partners. The device must enable fast screening of interactions as well as sensitive affinity measurement. The measurable dynamic range of dissociation constant must be at least in nM -mM range and binding affinity in at least nM -mM range. Low sample consumption (in order of 10 microlitre) and low nanomole of the labeled target is needed for the measurement. The device must enable detection of the interaction based on changes of emission spectrum of exited fluorophore under isothermal conditions and must be able to create a microscopic non-isothermal temperature field (temperature gradient) and determine nanoparticle including protein binding events based on the temperature related intensity change and fluorescence intensity change following thermophoresis under the thermal gradient. Intensity changes and/or spectrum shifts of the fluorescence probe versus ligand concentrations are measured and plotted to calculate the dissociation constant. The device must come with detailed documentation of all features. The device will be part of the Proteomics and protein analysis core facility infrastructure of Biocenter Oulu. The core facility has an open access policy, and the instrumentation and software must be easy to use and maintain. The device must include a user interface to control the operation. The device must be well suited to an academic multi-Turnkey Filtered Rayleigh Scattering (FRS) System for the combined measurement of pressure, temperature and three-component velocity field in gaseous flows
Aarhus UniversitetAarhus CAarhus University intends to award a contract without prior publication pursuant to section 80(3)(2) and section 80(4) of the Danish Public Procurement Act, cf. Article 32(2)(b)(ii) of Directive 2014/24/EU, on the basis that the required supplies and services can only be provided by one particular economic operator due to an absence of competition for technical reasons. Aarhus University has assessed that no reasonable alternative or substitute exists, and that the absence of competition is not the result of an artificial narrowing of the parameters of the procurement. The intended contract concerns the delivery of a complete turnkey Filtered Rayleigh Scattering (FRS) system for laser-based diagnostics in gaseous flows. The system is required for quantitative planar measurements of pressure, temperature and three-component velocity information in a measurement region of up to 100 mm × 100 mm. The required system must comprise, as one integrated measurement chain, a frequency-tunable narrow-linewidth laser source at approximately 532 nm, high-precision wavelength measurement and stabilisation, iodine-based molecular filtering, beam delivery and light-sheet optics, multi-perspective imaging from nine viewing directions, perspective calibration, control and data acquisition functionality, installation, commissioning, documentation, training and acceptance testing. The decisive requirement is not the supply of individual optical, laser, imaging or software components, but the delivery of a complete and operational FRS measurement system where one supplier assumes responsibility for the integration, calibration, commissioning and verified performance of the complete measurement chain. FRS measurements depend on the combined and synchronised performance of laser frequency control, molecular filter transmission, optical alignment, light-sheet formation, imaging geometry, calibration and data acquisition. These elements are technically interdependent and jointly determine whether the system can produce usable calibrated data for pressure, temperature and three-component velocity evaluation. In Aarhus University’s assessment, procuring individual components from several suppliers would not constitute a reasonable alternative or substitute, as it would not provide a supplier with overall responsibility for the integration, calibration, commissioning and verified performance of the required operational FRS functionality. Based on Aarhus University’s technical and market assessment, ILA R&D GmbH is the only economic operator identified as capable of delivering the required complete turnkey FRS system and assuming responsibility for its overall functionality. Other suppliers considered may be able to provide individual components or related optical flow-diagnostic systems, such as lasers, wavelength meters, cameras, optical components, PIV/PTV, LDV, LIF, BOS, Rayleigh/scalar imaging or software interfaces. However, Aarhus University has not identified a reasonable alternative or substitute capable of delivering the specific integrated FRS solution required, including iodine-filtered FRS, frequency-scanning and single-frequency operation, nine-perspective imaging, perspective calibration and acceptance testing of the complete system. Aarhus University therefore considers that the intended direct award is justified by the absence of competition for technical reasons. The absence of competition results from the technical requirements of the intended FRS measurement concept and the need for one supplier to deliver and take responsibility for the complete integrated system, and not from an artificial narrowing of the parameters of the procurement.RFI - 1105601 UiO Life Sciences user equipment. K970.01 Laser microdissection microscope for DVP
STATSBYGGOSLOFrist: 30. Sept.Statsbygg is constructing the new Life Sciences Building (LVB) for the University of Oslo and Oslo University Hospital, on behalf of the Norwegian Ministry of Education and Research, with the South-Eastern Norway Regional Health Authority as co-commissioning authority. The building will provide workplaces for approximately 1,600 employees and 1,600 students. Excavation and groundwork commenced in the second quarter of 2019, and completion is scheduled for the end of 2026. The building will bring together a range of academic and research disciplines in a joint interdisciplinary environment to develop new solutions to major challenges in health and sustainability, with access to the best and most modern equipment required to conduct world-class research, teaching and innovation.NTA equipment with Zeta potential
Fjársýsla ríkisinsReykjavíkFrist: 25. Sept.Fjársýslan, on behalf of the University of Iceland, ID. No. 6001692039, invites tenders for 23402 – NTA equipment with Zeta potential. The purpose of this procurement is to acquire nanoparticle tracking analysis (NTA) instrument for research use at the University of Iceland. The scope of the contract includes the delivery of complete and fully operational NTA equipment, including all necessary accessories, hardware, software and services required for installation, operation and initial use.Lieferung und Installation von Ausrüstung für die APECS-Pilotlinie (Hochleistungsfemtosekundenlaser)
INL - INTERNATIONAL IBERIAN NANOTECHNOLOGY LABORATORYBragaThe subject matter of this contract is the supply and installation of scientific equipment and components to INL, listed below and detailed in Schedule V attached to these Standard Specifications (from now on referred to as ‘Specifications’). The equipment listed in Schedule V are the lots that the tender comprises. Tenderers may bid for one or more lots. The subject matter of the contract, in all cases, does not include so-called refurbished scientific instruments and equipment. The single lot comprising the tender is as follows: 1. High Power Femtosecond Laser The project is co-funded by the EU Chips Joint Undertaking under the Joint Procurement Agreement signed between INL and Chips JU.APECS/INL-04 - CONTRACT FOR THE SUPPLY AND INSTALLATION OF EQUIPMENT AND COMPONENTS WITHIN APECS (ADVANCED PACKAGING FOR ELECTRONICS COMPONENTS AND SYSTEMS AND HETEROGENEOUS) PILOT LINE
INL - INTERNATIONAL IBERIAN NANOTECHNOLOGY LABORATORYBragaThe subject matter of this contract is the supply and installation of scientific equipment and components to INL, listed below and detailed in Schedule V attached to these Standard Specifications (from now on referred to as ‘Specifications’). The equipment listed in Schedule V are the lots that the tender comprises. Tenderers may bid for one or more lots. The subject matter of the contract, in all cases, does not include so-called refurbished scientific instruments and equipment. The single lot comprising the tender is as follows: 1. Automated system for controlled wet processes for NEMSAgnostic Slide scanner with integrated spectral unmixing
Kungliga Tekniska högskolanSTOCKHOLMFrist: 05. Okt.The purpose of this purchase is to acquire a slide scanner capable of imaging and detecting signals in both brightfield and fluorescence. The system will be used daily for scanning tissue sections on microscope slides and must support flexible marker detection across multiple wavelengths, with sensitive autofocus suitable for different tissue types. Due to extensive use, the scanner must be fast, reliable, and capable of continuous operation over long working hours.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 28. September 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Tampere University Foundation sr.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.