Freistaat Bayern, vertreten durch die Friedrich-Alexander-Universität Erlangen-NürnbergErlangen
Solar Simulator
This call for bids concerns the supply of a solar simulator that produces the solar spectrum for applications in photoelectrochemistry, photocatalysis, and photovoltaic research. The system must be capable of both standalone operation and integration with a scanning probe microscope via a fiber optic coupling. The solar simulator must ena...
Typ: Ausschreibung
Messtechnik, Laborinstrumente
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Freistaat Bayern, vertreten durch die Friedrich-Alexander-Universität Erlangen-Nürnberg
- Veröffentlicht:
- 20. August 2026
- Frist:
- Nicht angegeben
- Thema:
- Messtechnik
Ausschreibungsbeschreibung
This call for bids concerns the supply of a solar simulator that produces the solar spectrum for applications in photoelectrochemistry, photocatalysis, and photovoltaic research. The system must be capable of both standalone operation and integration with a scanning probe microscope via a fiber optic coupling. The solar simulator must enable controlled photo-irradiation of samples from multiple directions (with respect to the samples), including top, lateral, and bottom illumination. This capability is required to support a wide range of experimental configurations.
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
7 Datenbereiche verfügbar
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Unterlagen
Freischalten2 Angaben erfasstUnterlagen · Dokumentenpaket
Auftraggeber
Freischalten3 Angaben erfasstAuftraggeber · Anschrift · Kontakt
Lose
Freischalten2 Angaben erfasstLose LOT-0001 · Lose LOT-0002
Verfahrensdaten
Freischalten6 Angaben erfasstBekanntmachungsnummer · Verfahrensreferenz · Referenz des Auftraggebers · Verfahrensart · +2 weitere
Ausführungsorte
Freischalten2 Angaben erfasstAusführungsorte
Bieter und Auftragnehmer
Freischalten6 Angaben erfasstBieter und Auftragnehmer · Anschrift · Kontakt
Veröffentlichungsstelle
Freischalten3 Angaben erfasstVeröffentlichungsstelle · Anschrift · Kontakt
Ähnliche Bekanntmachungen
8Solar Simulator
Freistaat Bayern, vertreten durch die Friedrich-Alexander-Universität Erlangen-NürnbergErlangenFrist: 13. Aug.This call for bids concerns the supply of a solar simulator that produces the solar spectrum for applications in photoelectrochemistry, photocatalysis, and photovoltaic research. The system must be capable of both standalone operation and integration with a scanning probe microscope via a fiber optic coupling. The solar simulator must enable controlled photo-irradiation of samples from multiple directions (with respect to the samples), including top, lateral, and bottom illumination. This capability is required to support a wide range of experimental configurations.Supply and maintenance of a LED Solar Simulator for Photovoltaic Module Calibration
European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsFrist: 12. Aug.The purpose of the contract is to procure supplies together with related maintenance services. The supply to be purchase is a LED solar simulator needed to calibrate large-area photovoltaic solar modules at STC (Standard Test Conditions). The simulator must conform to the International Electrotechnical Commission standard. It must have a tuneable spectrum with a spectral range and a minimum effective measurement area of a rectangle. The simulator must be capable of operating in both pulsed mode and continuous mode. The simulator must provide active module temperature control under continuous operation.Provision of Solar as a Service
An Post_391Dublin 1This is a call to competition by AN POST for the Provision of Solar as a Service Contract (SaaS) The Successful Tenderer shall deliver, operate, and maintain solar photovoltaic (PV) generation systems under a Solar-as-a-Service model. The objective is to reduce energy costs, improve sustainability performance, and support compliance with corporate and regulatory decarbonisation targets. An Post plans to install solar photovoltaic (PV) systems at up to 50 sites nationwide. Each site is expected to have an average system capacity of approximately 250 m² / 100–250 kWp (equivalent to ~11 kWp for smaller sites, scaling higher depending on roof size and energy demand).2026 NMBI RFT for Solar Power Panels Installation
Bord Altranais agus Cnáimhseachais na hÉireann Nursing and Midwifery Board of IrelandDublinFrist: 11. Sept.The authority seeks proposals for the design, supply, installation, commissioning, and maintenance of a 37 kW (approx.) solar photovoltaic (PV) system to be mounted on the roof of the corporate offices in Blackrock, Co. Dublin. The system will be installed on a commercial property and must comply with all relevant Irish and EU standards.New Simulator Centre
SjöfartsverketNORRKÖPINGThe main object of the procurement is to procure a new simulator centre with service and support for up to 15 years.BMS/ITM/SIS REQ00088951 - UNDP Somalia - Solar PV System Expansion
UNDPJordanFrist: 17. Sept.This project seeks to enhance the energy supply for the UNDP Somalia Country Office (CO) at the Hargeisa premises with renewable energy by supplying, installing, commissioning, and after-sales services for the turnkey Solar PV Expansion System. At present, the compound depends on the main grid, a 25 kWp array paired with a 60-kWh battery bank and two diesel generators (both 110 kVA). The vendor shall submit a comprehensive proposal for a turnkey solar PV solution based on the following scope of work:Supply and delivery of a solar PV system with a capacity of 13 kWp.Installation, User Acceptance Test (UAT), and Commissioning of the complete system.Integration of the complete system into the facility, the existing solar PV hybrid system & and existing power supply.Provision of bi-annual preventive maintenance visits and after-sales service by the local partner (for 3 years). Training of the users on system operation and basic maintenance to ensure first-level response and maintenance oversight.Important dates for this tender: Confirmation of participation in Site Visit and Bidders Conference: 31 August 2026, 2PM CESTPre-Bid Site Visit: 1 September 2026, 10AM local timeBidders’ Conference: 3 September 2026, 10AM CESTRequest for Clarification: 10 September 2026, COB CESTOffer Submission: 17 September 2026, 5PM CESTKindly review the attached Schedule of Requirements for all information regarding this tender. Evaluation will be done on a PASS/FAIL basis. Bidders must be available for clarifications in case there are questions related to the documents submitted. In case of a FAIL on a specific requirement below or in the SoR, the bid will be considered non-compliant.Scanning Electron Microscope
Danmarks Tekniske Universitet - DTUKgs. LyngbyFrist: 31. Aug.This tender concerns the acquisition of a scanning electron microscope (SEM) for a university facility that provides access to an extensive suite of nanofabrication and characterisation tools as one of its core purposes. Due to a recently identified bottleneck in the suite of high-end characterisation in the cleanroom, DTU wishes to acquire a SEM. This problem has arisen as the result of multiple breakdowns among the aging and current instruments thus exposing an unexpected vulnerability in the overall process flow of several of our commercial users. The instrument is intended to meet the characterization requirements of DTU’s key commercial customers. Accordingly, only a high-end system equipped with a field emission source, capable of delivering high emission at low energy spread, will be considered acceptable. The system must provide state-of-the-art lateral image resolution of 0.8 nm or better at an accelerating voltage of 15 kV, and 0.9 nm or better at 1 kV, both achieved without beam deceleration or sample bias and using the in-column secondary electron detector. The SEM must be compatible with samples originating directly from customer production processes and must therefore be capable of handling wafers with diameters of up to 200 mm. Typical substrate materials include silicon, fused silica, and quartz. These materials cannot be coated to reduce charging effects during SEM analysis, and the instrument must therefore be capable of imaging such non-conductive samples without the application of conductive coatings.Photovoltaic and Battery Energy Storage System
daa plcDublinFrist: 24. Aug.Provision of a Photovoltaic and Battery Energy Storage System at Dublin airport. As part of daa’s strategic commitment to enhancing energy resilience and advancing sustainability at Dublin Airport, this project seeks to deliver a large-scale Solar Photovoltaic (PV) installation integrated with a Battery Energy Storage System (BESS). This project will help support daa’s long-term vision of decarbonising airport operations and securing a reliable, self-sufficient energy supply. daa intent to establish a single supplier agreement for the provision of these works.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Freistaat Bayern, vertreten durch die Friedrich-Alexander-Universität Erlangen-Nürnberg.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.