TEKNOLOGIAN TUTKIMUSKESKUS VTT OYVTTTED
Plasma enhanced chemical vapour deposition tool
THE SUBJECT OF THE PROCUREMENT The subject of the procurement is a plasma-enhanced automated cassette to cassette chemical vapor deposition (PECVD) system for deposition of dielectric thin films (SiO#, SiN, TEOS, SiON, a Si) for research and pilot line use in the VTT Micronova cleanroom. DIRECT AWARD, Article 40 2(2) of Finnish Procuremen...
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
- Published:
- September 06, 2026
- Deadline:
- Not specified
Tender description
Show full descriptionCollapse description
THE SUBJECT OF THE PROCUREMENT The subject of the procurement is a plasma-enhanced automated cassette to cassette chemical vapor deposition (PECVD) system for deposition of dielectric thin films (SiO#, SiN, TEOS, SiON, a Si) for research and pilot line use in the VTT Micronova cleanroom. DIRECT AWARD, Article 40 2(2) of Finnish Procurement act (1397/2016) The procurement will be carried out as a direct award in accordance with 40 article Section 2(2) of the Finnish Public Procurement Act. According to the 40 § section 2(2) of the Act on Public Contracts (1397/2016), only a certain supplier can implement the procurement for a technical reason, or for a reason related to protecting an exclusive right; it shall be a further condition that there are no reasonable alternatives or substitute solutions, and that the absence of competition is not due to an artificial narrowing of the terms and conditions of the procurement. The justification for direct procurement applies in this case, as VTT already operates an existing deep reactive ion etching (DRIE) system manufactured by SPTS. In order to extend the operational lifetime of the existing etch chamber, and optimize the use of limited cleanroom space, it is necessary to integrate the existing etch chamber with a new system. Due to proprietary hardware and software rights, only the original manufacturer of the existing DRIE system (KLA/SPTS) is technically capable of integrating the etch chamber with newer system configurations. The process tool control software is developed by the equipment manufacturer and is specifically designed for defined system configurations; consequently, it is not transferable to equipment supplied by other manufacturers. Accordingly, no reasonable alternative or substitute solution exists, and the absence of competition is not the result of an artificial restriction of the procurement conditions.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
6 data areas available
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock1 detail capturedLots LOT-0000
Procedure data
Unlock6 details capturedPublication number · Procedure reference · Buyer reference · Procedure type · +2 more
Bidders and contractors
Unlock2 details capturedBidders and contractors · Address
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
8Deposition Tool 8 Inch
Freistaat Bayern vertreten durch die Technische Universität München, hier handelnd die Forschungs-Neutronenquelle Heinz Maier-Leibnitz (FRM II)GarchingDeadline: Oct 05The Technical University of Munich - Chair of Technical Physics E23/WMI will acquire a UHV cluster System for the fabrication of superconducting circuits on 8 inch'' wafers. The system must provide UHV conditions and has to include an HV load-lock chamber, a central handling chamber, a UHV chamber for the evaporation of Al thin films, a UHV chamber for sputtering of superconductors, a UHV chamber for oxidation, a UHV chamber for Ar ion milling, and a flipping station. The system must allow metalizing both sides of the wafers in situ, with minimal backside particle contamination. The wafers should only be touched on the side (edge gripping).Plasma Activation Tool (IPMS-MRS14.3)
Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. - Einkauf B12 - Vergabestelle BauMünchenBeschreibung: 1 Stück - Plasma Activation Tool (IPMS-MRS14.3) Option 1 (LV Pos. 2.1): Please offer an extended warranty of further 12 months (in total 24 month) Option 2 (LV Pos. 3.2): The tool should handle wafers with the size of Option 3 (LV Pos. 3.6): The equipment provides a chuck for wafer size of 300mm Option 4 (LV Pos. 3.8): The machine can handle a tape mounted wafer with dicing frame for 300mm wafer according to IPMS specificationSilicon Austria Labs – Upgrades for magnetic thin film sputtering deposition equipment
Silicon Austria Labs GmbHGrazThe aim of this procurement procedure was to award the contract to the best bidder identified during the procurement procedure for the supply, installation, commissioning, and associated services (including documentation and trainings) of modules enabling the extension of the range of process capabilities related to the sputtering deposition of magnetic thin films and multilayers for Silicon Austria Labs GmbH.RH KLM MBK Hematology printing machine
Oslo Universitetssykehus HF (hovedenhet)OSLOOslo University Hospital intends to enter into a contract with Sysmex Norway NUF for the delivery of an automated printing and colour machine of type Sysmex SP-50 to the Unit for haematology at the Department of Medical Biochemistry, Rikshospitalet.The procurement is carried out without a prior announced competition as Sysmex is, in accordance with our knowledge, the only supplier who has haematology instruments that are certified and technically integrable with existing systems at the laboratory. Sysmex analysis line and Cobas 8100 automation system. Our account follows below.Plasma Activation Tool (IPMS-MRS14.3) - PR1091613-2480-P
Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. - Einkauf B12 - Vergabestelle BauMünchen1 Stück - Plasma Activation Tool (IPMS-MRS14.3) Option 1 (LV Pos. 2.1): Please offer an extended warranty of further 12 months (in total 24 month) Option 2 (LV Pos. 3.2): The tool should handle wafers with the size of Option 3 (LV Pos. 3.6): The equipment provides a chuck for wafer size of 300mm Option 4 (LV Pos. 3.8): The machine can handle a tape mounted wafer with dicing frame for 300mm wafer according to IPMS specificationSilicon Austria Labs – Chips JU: Ion Beam Trimming Tool
Silicon Austria Labs GmbHGrazThe aim of this procurement procedure was to award the contract to the best bidder identified during the procurement procedure for the supply, installation and commissioning of an ion beam trimming tool for Silicon Austria Labs GmbH.Market Consultation: Digital pathology slide scanners
Fimlab Laboratoriot OyTampereDeadline: Sep 24The purpose of this request for information is to clarify questions, obtain information and preliminary cost estimates related to a comprehensive digital pathology solution to be deployed by Fimlab Laboratoriot Oy (hereinafter “Fimlab” or "Contracting Entity"). This is not a Call for Tenders, but a market consultation; request of information. Fimlab invites interested suppliers to participate in the market consultation and requests their views regarding the planned procurement. The Contracting Entity is not committed to carrying out the procurement referred to in this request for information. Decisions on whether to initiate a possible procurement process will be made after the market consultation. SUBJECT OF THE PROCUREMENT The subject of the procurement is more detailed in annexes. Through this request for information, Fimlab seeks, among other things, to determine to assess the level of documentation and requirements, as well as market trends. RESPONDING TO THE REQUEST FOR INFORMATION Please respond to the questions and to submit the completed attachment via the Supplier Portal. The responses will be used in the preparation of the procurement and in the finalization of the Call for Tenders and its appendices. All responses will be treated confidentially. Information will not be disclosed to other suppliers without written consent for such disclosure. Responses may be submitted in Finnish or English in freeform written format. Respondents are requested to follow the numbering of the questions and to clearly indicate any trade secrets or confidential information. Responding to this request for information will not affect the position of a potential tenderer in any subsequent tender procedure. No remuneration will be paid for participation in the request for information. At this stage, the market consultation is being conducted solely through written submissions. However, the Contracting Entity may, at its discretion, invite participants to further discussions if clarification of the responses or additional information is considered necessary. In this case, the Contracting Entity, may continue supplier-specific discussions with a maximum of 3 suppliers.Analysis instrument for allergies and immunology to Sykehuset Innlandet HF
SYKEHUSINNKJØP HFVADSØSykehuset Innlandet Health Trust intends to enter into an agreement with Thermo Fisher Diagnostics AS for the procurement of an analysis instrument for allergies and auto-immunology. The mandate for the procurement of new instruments for analysing immunology shall be seen in connection with the need for an instrument for allergy examinations. The aim is to gather analyses of samples for immunological and allergological examinations in one instrument. The contract will be signed after a procurement without a competition in accordance with the procurement regulations §13-4 letter b.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- No specific submission deadline is currently stated for this notice.
- Who is the contracting authority?
- The contracting authority is TEKNOLOGIAN TUTKIMUSKESKUS VTT OY.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.