Ferdinand-Braun-Institut gGmbH, Leibniz-Institut für HöchstfrequenztechnikBerlinTED
Prior Information Notice – Maskless Laser Lithography System
The Ferdinand-Braun-Institut (FBH) plans to procure a high-performance maskless laser lithography system within the framework of the EU-funded APECS programme. The system will be used for high-resolution patterning of semiconductor wafers to support the development of advanced heterointegration technologies, including InP- and GaAs-based ...
Angebotsfrist: 11. Juli 2026 (abgelaufen)Typ: Ausschreibung
Messtechnik, Laborinstrumente
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Ferdinand-Braun-Institut gGmbH, Leibniz-Institut für Höchstfrequenztechnik
- Veröffentlicht:
- 10. Juni 2026
- Frist:
- 11. Juli 2026
- Thema:
- Messtechnik
Ausschreibungsbeschreibung
Vollständige Beschreibung anzeigenBeschreibung einklappen
The Ferdinand-Braun-Institut (FBH) plans to procure a high-performance maskless laser lithography system within the framework of the EU-funded APECS programme. The system will be used for high-resolution patterning of semiconductor wafers to support the development of advanced heterointegration technologies, including InP- and GaAs-based chiplets. It is intended to enable rapid prototyping as well as efficient processing of wafers with diameters up to 200 mm. The equipment must provide sub-micron precision combined with high throughput and support modern multi-beam laser writing technologies. It will be installed in a cleanroom environment and must comply with ISO class 5 requirements. The procurement procedure is planned for 2026.
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
7 Datenbereiche verfügbar
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Unterlagen
Freischalten50 Angaben erfasstUnterlagen · Dokumentenpaket
Auftraggeber
Freischalten6 Angaben erfasstAuftraggeber · Anschrift · Kontakt
Lose
Freischalten1 Angabe erfasstLose LOT-0001
Verfahrensdaten
Freischalten5 Angaben erfasstBekanntmachungsnummer · Referenz des Auftraggebers · Verfahrensart · Auftragsart · +1 weitere
Ausführungsorte
Freischalten2 Angaben erfasstAusführungsorte
Bieter und Auftragnehmer
Freischalten3 Angaben erfasstBieter und Auftragnehmer · Anschrift · Kontakt
Veröffentlichungsstelle
Freischalten6 Angaben erfasstVeröffentlichungsstelle · Anschrift · Kontakt
Ähnliche Bekanntmachungen
9Prior Information Notice – Sputter Deposition
Ferdinand-Braun-Institut gGmbH, Leibniz-Institut für HöchstfrequenztechnikBerlinFrist: 11. JuliThe Ferdinand-Braun-Institut (FBH) plans to procure a sputter deposition system within the framework of the EU-funded APECS programme. The system will be used for the deposition of metallic and insulating thin films on semiconductor wafers with diameters of up to 200 mm. It is intended to support advanced heterogeneous integration technologies, including InP-on-Si (BiCMOS) platforms. The equipment shall enable highly controlled thin-film processes such as metallization, interconnect formation, passivation and barrier layer deposition. A multi-chamber cluster system with integrated cleaning and deposition capabilities is required to ensure high process quality and contamination control. The system will be installed in a cleanroom environment and must be compatible with semiconductor manufacturing requirements. The procurement procedure is planned for 2026.Prior Information Notice – Wafer Dicing Equipment
Ferdinand-Braun-Institut gGmbH, Leibniz-Institut für HöchstfrequenztechnikBerlinFrist: 11. JuliThe Ferdinand-Braun-Institut (FBH) plans to procure mechanical wafer dicing equipment for backend processing within the framework of its ongoing infrastructure development activities. The system will be used for the separation of semiconductor wafers into individual chips (dicing). It shall support wafers up to 200 mm in diameter and be suitable for various semiconductor materials such as Si, SiC, GaN, InP and GaAs. The equipment is intended to ensure precise and reproducible dicing processes using mechanical blade-based technology. It will be installed in a cleanroom environment and must be compatible with ISO class 7 requirements. The procurement procedure is planned for 2026.Prior Information Notice – Eddy Current Wafer Mapping System
Ferdinand-Braun-Institut gGmbH, Leibniz-Institut für HöchstfrequenztechnikBerlinFrist: 12. JuliThe Ferdinand-Braun-Institut (FBH) plans to procure an eddy current wafer mapping system within the framework of the EU-funded APECS programme. The system will be used for non-destructive electrical characterisation of semiconductor wafers during processing, including sheet resistance and conductivity measurements. It is intended to support process monitoring and quality control in advanced semiconductor manufacturing. The equipment shall enable automated, high-resolution mapping of wafers up to 200 mm in diameter and provide fast feedback on process uniformity and material properties. It will be installed in a cleanroom environment and integrated into existing process workflows. The procurement procedure is planned for 2026.Prior Information Notice – RF On-Wafer Probe Station
Ferdinand-Braun-Institut gGmbH, Leibniz-Institut für HöchstfrequenztechnikBerlinFrist: 12. JuliThe Ferdinand-Braun-Institut (FBH) plans to procure an automated RF on-wafer probing system within the framework of the EU-funded APECS programme. The system will be used for electrical characterisation of semiconductor devices, circuits and demonstrators at wafer level. It is intended to enable high-frequency and mmWave measurements under controlled and reproducible conditions. The equipment shall support automated probing of wafers up to 200 mm in diameter and provide a versatile platform for a wide range of RF measurements. It will be installed in a cleanroom environment and integrated into existing measurement and process workflows. The procurement procedure is planned for 2026.Prior Information Notice – RF Measurement System for On-Wafer Characterisation
Ferdinand-Braun-Institut gGmbH, Leibniz-Institut für HöchstfrequenztechnikBerlinFrist: 12. JuliThe Ferdinand-Braun-Institut (FBH) plans to procure a high-frequency RF measurement system for on-wafer characterisation within the framework of the EU-funded APECS programme. The system will be used for the electrical characterisation of semiconductor devices, circuits and demonstrators, including single-ended and differential measurements in the mmWave frequency range. It is intended to support advanced heterointegration processes and ensure reliable and high-quality measurement results. The equipment shall enable automated, high-precision measurements and provide a versatile platform for RF analysis, including network and spectrum measurements. It will be integrated into existing cleanroom and measurement environments. The procurement procedure is planned for 2026.European Tender Electron Beam Lithography system
Universiteit TwenteEnschedeFrist: 21. Aug.The University of Twente is tendering to purchase an Electron Beam Lithography system. The MESA+ Institute of the University of Twente will invest in a new Electron Beam system (e-beam system). A system, suitable for defining patterns in electron sensitive resists, at high resolution and high speed, compatible with a wide range of applications and substrate types up to 200mm in diameter. The system will be used by a wide range of users, i.e. academic researchers and students as well as industrial engineers with different backgrounds (photonics, (nano)-electronics etc.) and different levels of expertise.Femtosecond Laser System
Helmholtz-Zentrum Dresden-Rossendorf e.V.DresdenThe requested laser system is an essential component of the terahertz (THz) user facility TELBE at the ELBE Center for High-Power Radiation Sources at the HZDR. At this facility, intense THz pulses from an accelerator-based source are used to excite various kinds of sample materials; the THz-driven dynamics are then probed using optical methods based on ultrashort (femtosecond), intense, carefully tailored and synchronized light pulses. The requested laser infrastructure will serve as the main probe laser with versatile parameters and output options. This laser infrastructure will also serve various purposes apart from probing, such as providing a timing reference, additional optical pump capabilities for 2D spectroscopy experiments. The laser system must consist of the following main components: A) Femtosecond laser oscillator B) Laser amplifier C)Optical parametric amplifier D) Mid-infrared (MIR) source. Beside the fulfillment of the criteria described under 2. Performance quote of Annex 01A, the scope of deliveries and services includes: - delivery at the place of performance - laser installation infrastructure (electricity, cooling water, and optical table) will be provided by HZDR - suitable laser chillers (water-water) included in the delivery - site acceptance test (SAT) - user documentation in English - a 12-month warranty on the entire laser system, including all necessary components, from the date of acceptance (SAT), but no later than 3 months after delivery if acceptance is delayed for reasons beyond the contractor’s control - CE conformity - on-site user training for at least two usersPrior information notice - Stimulab project - 2025
DigitaliseringsdirektoratetOsloFrist: 25. JuliTotal value of all competitions is NOK 9,000,000,000 excluding VAT, plus options. Competitions will be held for all projects; existing framework agreements will not apply. Tenderers must provide service design as main competence, supported by other competences adapted per project. All Stimulab projects shall follow the triple diamond methodology. Delivery is open and experimental, resulting in an anchored and committed system to be implemented or a platform for further development.Femtosecond laser ablation system for geological applications
Geologian tutkimuskeskusEspooA tender is requested for 1 (one) femtosecond laser ablation system for geological applications. The tenderer shall guarantee that the object of the tender shall be free of defects and meet the requirements as set forth in this document and its appendices. The tender shall incorporate the latest improvements, components and software versions available at the time the tender is submitted to Geological Survey of Finland. The instrument and the related services must satisfy the following minimum requirements, and the fulfilment of all criteria must be documented within the tender. Please, see the ITT fs laser for more details.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 11. Juli 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Ferdinand-Braun-Institut gGmbH, Leibniz-Institut für Höchstfrequenztechnik.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.