TEKNOLOGIAN TUTKIMUSKESKUS VTT OYVTTTED
Plasma enhanced chemical vapour deposition tool
THE SUBJECT OF THE PROCUREMENT The subject of the procurement is a plasma-enhanced automated cassette to cassette chemical vapor deposition (PECVD) system for deposition of dielectric thin films (SiO#, SiN, TEOS, SiON, a Si) for research and pilot line use in the VTT Micronova cleanroom. DIRECT AWARD, Article 40 2(2) of Finnish Procuremen...
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
- Veröffentlicht:
- 06. September 2026
- Frist:
- Nicht angegeben
Ausschreibungsbeschreibung
Vollständige Beschreibung anzeigenBeschreibung einklappen
THE SUBJECT OF THE PROCUREMENT The subject of the procurement is a plasma-enhanced automated cassette to cassette chemical vapor deposition (PECVD) system for deposition of dielectric thin films (SiO#, SiN, TEOS, SiON, a Si) for research and pilot line use in the VTT Micronova cleanroom. DIRECT AWARD, Article 40 2(2) of Finnish Procurement act (1397/2016) The procurement will be carried out as a direct award in accordance with 40 article Section 2(2) of the Finnish Public Procurement Act. According to the 40 § section 2(2) of the Act on Public Contracts (1397/2016), only a certain supplier can implement the procurement for a technical reason, or for a reason related to protecting an exclusive right; it shall be a further condition that there are no reasonable alternatives or substitute solutions, and that the absence of competition is not due to an artificial narrowing of the terms and conditions of the procurement. The justification for direct procurement applies in this case, as VTT already operates an existing deep reactive ion etching (DRIE) system manufactured by SPTS. In order to extend the operational lifetime of the existing etch chamber, and optimize the use of limited cleanroom space, it is necessary to integrate the existing etch chamber with a new system. Due to proprietary hardware and software rights, only the original manufacturer of the existing DRIE system (KLA/SPTS) is technically capable of integrating the etch chamber with newer system configurations. The process tool control software is developed by the equipment manufacturer and is specifically designed for defined system configurations; consequently, it is not transferable to equipment supplied by other manufacturers. Accordingly, no reasonable alternative or substitute solution exists, and the absence of competition is not the result of an artificial restriction of the procurement conditions.
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
6 Datenbereiche verfügbar
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Unterlagen
Freischalten50 Angaben erfasstUnterlagen · Dokumentenpaket
Auftraggeber
Freischalten3 Angaben erfasstAuftraggeber · Anschrift · Kontakt
Lose
Freischalten1 Angabe erfasstLose LOT-0000
Verfahrensdaten
Freischalten6 Angaben erfasstBekanntmachungsnummer · Verfahrensreferenz · Referenz des Auftraggebers · Verfahrensart · +2 weitere
Bieter und Auftragnehmer
Freischalten2 Angaben erfasstBieter und Auftragnehmer · Anschrift
Veröffentlichungsstelle
Freischalten3 Angaben erfasstVeröffentlichungsstelle · Anschrift · Kontakt
Ähnliche Bekanntmachungen
7Deposition Tool 8 Inch
Freistaat Bayern vertreten durch die Technische Universität München, hier handelnd die Forschungs-Neutronenquelle Heinz Maier-Leibnitz (FRM II)GarchingFrist: 05. Okt.The Technical University of Munich - Chair of Technical Physics E23/WMI will acquire a UHV cluster System for the fabrication of superconducting circuits on 8 inch'' wafers. The system must provide UHV conditions and has to include an HV load-lock chamber, a central handling chamber, a UHV chamber for the evaporation of Al thin films, a UHV chamber for sputtering of superconductors, a UHV chamber for oxidation, a UHV chamber for Ar ion milling, and a flipping station. The system must allow metalizing both sides of the wafers in situ, with minimal backside particle contamination. The wafers should only be touched on the side (edge gripping).Edge-Handling Sputtering Cluster Tool
TEKNOLOGIAN TUTKIMUSKESKUS VTT OYVTTFrist: 24. Aug.The object of the tender process is an edge-handling sputtering cluster tool (later also “Equipment”). The Equipment is a sputtering cluster tool for 200-mm wafers with wafer edge-handling capability for the VTT Micronova cleanroom semiconductor front end. The procurement includes a deposition chamber with four magnetron sputtering sources. During transport and processing, the wafers are mechanically touched only at the wafer edge, and they can be flipped in vacuum between the processes. The object of the tender process and the technical requirements are described in more detail in the invitation to tender documents.Plasma Activation Tool (IPMS-MRS14.3)
Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. - Einkauf B12 - Vergabestelle BauMünchenBeschreibung: 1 Stück - Plasma Activation Tool (IPMS-MRS14.3) Option 1 (LV Pos. 2.1): Please offer an extended warranty of further 12 months (in total 24 month) Option 2 (LV Pos. 3.2): The tool should handle wafers with the size of Option 3 (LV Pos. 3.6): The equipment provides a chuck for wafer size of 300mm Option 4 (LV Pos. 3.8): The machine can handle a tape mounted wafer with dicing frame for 300mm wafer according to IPMS specificationSilicon Austria Labs – Upgrades for magnetic thin film sputtering deposition equipment
Silicon Austria Labs GmbHGrazThe aim of this procurement procedure was to award the contract to the best bidder identified during the procurement procedure for the supply, installation, commissioning, and associated services (including documentation and trainings) of modules enabling the extension of the range of process capabilities related to the sputtering deposition of magnetic thin films and multilayers for Silicon Austria Labs GmbH.RH KLM MBK Hematology printing machine
Oslo Universitetssykehus HF (hovedenhet)OSLOOslo University Hospital intends to enter into a contract with Sysmex Norway NUF for the delivery of an automated printing and colour machine of type Sysmex SP-50 to the Unit for haematology at the Department of Medical Biochemistry, Rikshospitalet.The procurement is carried out without a prior announced competition as Sysmex is, in accordance with our knowledge, the only supplier who has haematology instruments that are certified and technically integrable with existing systems at the laboratory. Sysmex analysis line and Cobas 8100 automation system. Our account follows below.Plasma Activation Tool (IPMS-MRS14.3) - PR1091613-2480-P
Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. - Einkauf B12 - Vergabestelle BauMünchen1 Stück - Plasma Activation Tool (IPMS-MRS14.3) Option 1 (LV Pos. 2.1): Please offer an extended warranty of further 12 months (in total 24 month) Option 2 (LV Pos. 3.2): The tool should handle wafers with the size of Option 3 (LV Pos. 3.6): The equipment provides a chuck for wafer size of 300mm Option 4 (LV Pos. 3.8): The machine can handle a tape mounted wafer with dicing frame for 300mm wafer according to IPMS specificationMarket Consultation: Digital pathology slide scanners
Fimlab Laboratoriot OyTampereFrist: 24. Sept.The purpose of this request for information is to clarify questions, obtain information and preliminary cost estimates related to a comprehensive digital pathology solution to be deployed by Fimlab Laboratoriot Oy (hereinafter “Fimlab” or "Contracting Entity"). This is not a Call for Tenders, but a market consultation; request of information. Fimlab invites interested suppliers to participate in the market consultation and requests their views regarding the planned procurement. The Contracting Entity is not committed to carrying out the procurement referred to in this request for information. Decisions on whether to initiate a possible procurement process will be made after the market consultation. SUBJECT OF THE PROCUREMENT The subject of the procurement is more detailed in annexes. Through this request for information, Fimlab seeks, among other things, to determine to assess the level of documentation and requirements, as well as market trends. RESPONDING TO THE REQUEST FOR INFORMATION Please respond to the questions and to submit the completed attachment via the Supplier Portal. The responses will be used in the preparation of the procurement and in the finalization of the Call for Tenders and its appendices. All responses will be treated confidentially. Information will not be disclosed to other suppliers without written consent for such disclosure. Responses may be submitted in Finnish or English in freeform written format. Respondents are requested to follow the numbering of the questions and to clearly indicate any trade secrets or confidential information. Responding to this request for information will not affect the position of a potential tenderer in any subsequent tender procedure. No remuneration will be paid for participation in the request for information. At this stage, the market consultation is being conducted solely through written submissions. However, the Contracting Entity may, at its discretion, invite participants to further discussions if clarification of the responses or additional information is considered necessary. In this case, the Contracting Entity, may continue supplier-specific discussions with a maximum of 3 suppliers.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist TEKNOLOGIAN TUTKIMUSKESKUS VTT OY.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.