Gas Networks IrelandCorkTED
25/063 Pressure Reduction Systems and Filtering and Metering System QS
The objective of this Qualification System is to qualify Applicants for the design, fabrication, welding, non destructive testing, pressure testing, assembly, inspection, painting, quality assurance, commissioning, delivery and provision of documentation for Pressure Reduction Systems (PRS) and line-pressure (LP) across the Gas Networks I...
Armaturen, Verfahrenstechnik
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Gas Networks Ireland
- Veröffentlicht:
- 27. August 2026
- Frist:
- 26. August 2036
- Thema:
- Armaturen
Ausschreibungsbeschreibung
Vollständige Beschreibung anzeigenBeschreibung einklappen
The objective of this Qualification System is to qualify Applicants for the design, fabrication, welding, non destructive testing, pressure testing, assembly, inspection, painting, quality assurance, commissioning, delivery and provision of documentation for Pressure Reduction Systems (PRS) and line-pressure (LP) across the Gas Networks Ireland transmission network with operating pressures greater than 16 bar. The following is applicable to the scope of the QS: • GNI may procure all or any part of the PRS and LP installation. • For the purposes of compliance with Regulation 97(1)(a) (Modification of contracts during their term) of the Utilities Regulations 2016 GNI may require additional services, works, supplies under the scope, relevant to PRS and LP site e.g. the provision of equipment listed below and all ancillary equipment to facilitate the safe and efficient operation of the PRS assembly. The Contracting Entity reserves the right, at any time during this competition and/or the operation of the Qualification System, to conduct audits (including Supplier Quality Audits), which may include site visits and quality audits, for the purposes of verifying the accuracy and completeness of tender submissions and any supporting documentation provided. Such audits may include review of relevant facilities, processes, quality management arrangements, records and traceability information, and (where appropriate) the Applicant’s and/or its sub-suppliers’ premises. Applicants must acknowledge that, because materials, equipment and services within the scope of this Qualification System may be used directly on the gas network, participation in such audits may be a requirement of GNI and may be a minimum condition for progression, for any subsequent Call for Competitions. Any corrective actions identified during an audit must be satisfactorily addressed within the timeframe specified by the Contracting Entity. The Contracting Entity reserves the right to call off from the Qualification System in respect of any goods and services that may be required in Northern Ireland and/or Scotland
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
6 Datenbereiche verfügbar
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Unterlagen
Freischalten50 Angaben erfasstUnterlagen · Dokumentenpaket
Auftraggeber
Freischalten3 Angaben erfasstAuftraggeber · Anschrift · Kontakt
Lose
Freischalten1 Angabe erfasstLose LOT-0001
Verfahrensdaten
Freischalten5 Angaben erfasstBekanntmachungsnummer · Verfahrensreferenz · Verfahrensart · Auftragsart · +1 weitere
Bieter und Auftragnehmer
Freischalten3 Angaben erfasstBieter und Auftragnehmer · Anschrift · Kontakt
Veröffentlichungsstelle
Freischalten6 Angaben erfasstVeröffentlichungsstelle · Anschrift · Kontakt
Ähnliche Bekanntmachungen
10Inspection and maintenance of sprinkler systems and manual extinguishing system for Vestre Viken HF
SYKEHUSINNKJØP HFVADSØFrist: 21. Sept.The objective of the procurement is to enter into a framework agreement for the inspection and maintenance of sprinkler systems and manual extinguishing systems for Vestre Viken HF. The framework agreement includes: • Sprinkler installations and the accompanying fire installations: Initial inspections, annual inspections and service of sprinkler installations (including water mist installations, inert/gas extinguishing installations and service of sprinkler valves) in accordance with the FG regulations. The agreement also includes inspections and maintenance of smoke ventilation and smoke hatches at the locations where such systems are installed. The inspections shall be carried out in accordance with the current rules, relevant standards and the manufacturer ́s instructions.• Option for manual extinguishing system: Annual inspection and service of hand extinguishers and annual inspection of fire hoses. The contracting authority is gradually planning to establish its own capacity to carry out all or parts of the service. The extent of the call-offs under the option can therefore be reduced during the agreement period. The tenderer shall, at a minimum, the first contract year be able to provide the service if needed.• Option for the procurement of new extinguishing apparatuses, fire hoses and equipment for sprinkler installations etc., the contract will include delivery to both buildings owned by Vestre Viken HF, as well as in some cases buildings that Vestre Viken HF rents or are responsible for operations.Turnkey Filtered Rayleigh Scattering (FRS) System for the combined measurement of pressure, temperature and three-component velocity field in gaseous flows
Aarhus UniversitetAarhus CAarhus University intends to award a contract without prior publication pursuant to section 80(3)(2) and section 80(4) of the Danish Public Procurement Act, cf. Article 32(2)(b)(ii) of Directive 2014/24/EU, on the basis that the required supplies and services can only be provided by one particular economic operator due to an absence of competition for technical reasons. Aarhus University has assessed that no reasonable alternative or substitute exists, and that the absence of competition is not the result of an artificial narrowing of the parameters of the procurement. The intended contract concerns the delivery of a complete turnkey Filtered Rayleigh Scattering (FRS) system for laser-based diagnostics in gaseous flows. The system is required for quantitative planar measurements of pressure, temperature and three-component velocity information in a measurement region of up to 100 mm × 100 mm. The required system must comprise, as one integrated measurement chain, a frequency-tunable narrow-linewidth laser source at approximately 532 nm, high-precision wavelength measurement and stabilisation, iodine-based molecular filtering, beam delivery and light-sheet optics, multi-perspective imaging from nine viewing directions, perspective calibration, control and data acquisition functionality, installation, commissioning, documentation, training and acceptance testing. The decisive requirement is not the supply of individual optical, laser, imaging or software components, but the delivery of a complete and operational FRS measurement system where one supplier assumes responsibility for the integration, calibration, commissioning and verified performance of the complete measurement chain. FRS measurements depend on the combined and synchronised performance of laser frequency control, molecular filter transmission, optical alignment, light-sheet formation, imaging geometry, calibration and data acquisition. These elements are technically interdependent and jointly determine whether the system can produce usable calibrated data for pressure, temperature and three-component velocity evaluation. In Aarhus University’s assessment, procuring individual components from several suppliers would not constitute a reasonable alternative or substitute, as it would not provide a supplier with overall responsibility for the integration, calibration, commissioning and verified performance of the required operational FRS functionality. Based on Aarhus University’s technical and market assessment, ILA R&D GmbH is the only economic operator identified as capable of delivering the required complete turnkey FRS system and assuming responsibility for its overall functionality. Other suppliers considered may be able to provide individual components or related optical flow-diagnostic systems, such as lasers, wavelength meters, cameras, optical components, PIV/PTV, LDV, LIF, BOS, Rayleigh/scalar imaging or software interfaces. However, Aarhus University has not identified a reasonable alternative or substitute capable of delivering the specific integrated FRS solution required, including iodine-filtered FRS, frequency-scanning and single-frequency operation, nine-perspective imaging, perspective calibration and acceptance testing of the complete system. Aarhus University therefore considers that the intended direct award is justified by the absence of competition for technical reasons. The absence of competition results from the technical requirements of the intended FRS measurement concept and the need for one supplier to deliver and take responsibility for the complete integrated system, and not from an artificial narrowing of the parameters of the procurement.LA3839C - CFT - UCD - Supply, Installation, and Commissioning of a Two-Stage Anaerobic Digestion System (TSAD)
Education Procurement Service (EPS)LimerickFrist: 21. Aug.University College Dublin request the supply and delivery of Anaerobic Digestion System this will be an element of a pilot plant facility which will be used by industry, entrepreneurs and researchers to validate and scale new technologies/processes to convert Ireland’s natural land and sea resources (including agri-food processing by-products) to products of high value for use in a wide variety of sectors. The Anaerobic Digestion Systems will be used to create databases to demonstrate feasibility, capacity, efficiency and economic viability of process and produce samples for technical use. The winning tenderer MUST conduct an inspection test of the equipment and necessary components after installation at the site. Validation requirements: ● Pressure and leak test verification ● Electrical installation and loop test verification ● Pump and agitator performance test verification ● Pressure equipment technical documentation and product contact materials ● Control loop test and PLC ● Alarm/interlock verification Date and time to be confirmed with UCD and the winning tenderer.Supply and delivery of Dewatering Pumps, Spare Parts and Accessories to UNMISS in Juba, the Republic of South Sudan
UN SecretariatKenyaFrist: 09. Sept.The United Nations Mission in South Sudan (UNMISS) hereby solicits Expressions of Interest (EOI) from competent Companies for the Supply and delivery of Dewatering Pumps, Spare Parts and Accessories to UNMISS in Juba, the Republic of South Sudan. Specific Requirements/Information Conditions: 1. Interested companies are invited to submit their Expression of Interest (EOI) online, by hand delivery, or by e-mail as indicated below. The EOI must include, as a minimum, the following information: United Nations Global Market (UNGM) and Registration Number for the Supply and delivery of Dewatering Pumps, Spare Parts and Accessories to UNMISS in Juba, the Republic of South Sudan of UNSPSC Code no 47101525 Company’s contact details (address, telephone and e-mail, etc.). Important Notice: 2. This REOI does not constitute a solicitation. UNMISS reserves the right to change or cancel the requirement at any time during the REOI and/or solicitation process. Thus, submitting a response to this REOI does not automatically guarantee that your company will be considered for receipt of the solicitation when issued. 3. UNMISS also reserves the right to send the Solicitation Documents to companies who were identified through additional market research or other means to source the UN requirements. 4. Vendors interested in fulfilling the requirement described above must be registered with UNGM and those not registered may wish to visit www.ungm.org for full registration information in order to be eligible to participate in any solicitation. 5. Vendors already registered at the UNGM basic level are strongly advised to upgrade to level 1. 6. Local and Regional companies, women owned business, and businesses owned by people living with disabilities are encouraged to participate. 7. The EOI, clearly marked “Expression of Interest - Supply and delivery of Dewatering Pumps, Spare Parts and Accessories to UNMISS in Juba, the Republic of South2026/1168 Framework agreement for inspections, service and maintenance of fire alarms, emergency lighting and speech notification systems from system supplier Autronica at properties in Oslo and surrounding areas.
STATSBYGGOSLOFramework agreement for inspections, service and maintenance of fire alarms, emergency lights and speech warning systems from the system supplier Autronica at properties in and around Oslo.Construction of a 200 m^3 liquid argon cryostat at the Italian Gran Sasso laboratory
Max-Planck-Institut für Molekulare Zellbiologie und GenetikDresdenFrist: 02. Okt.Subject of the expression of interest: The LEGEND-1000 experiment (www.legend-exp.org) will operate 1000 kg of germanium detectors in a 200 m^3 liquid argon cryostat at the Italian Gran Sasso laboratory (www.lngs.infn.it). LNGS maintains 3 large halls (18 m x 18 m x 100 m) under the Gran Sasso mountain. Access is via the A24 highway tunnel connecting Termo to L'Aquila with an exit in the tunnel. The Max Planck Institute for Nuclear Physics (MPIK) is responsible for the cryostat. The cryostat has an outer diameter of 7 m and a height of 10 m. It is a pressure vessel that has to be constructed underground according to PED 2014/68/EU following the requirements of EN 13445. The entrance door to the halls (4 m wide and 4.5 m high) limits the size of the parts that can be shipped. MPIK is searching for a company with experience in the construction of pressure vessel of similar size and with experience of remote-site mounting and welding. The tender documentation give more details about the project, LNGS and the cryostat. Interested companies have to visit LNGS before preparing an offer to understand the boundary conditions. The project is subject to funding approval. Information via: https://mcloud.mpi-hd.mpg.de/index.php/s/dydCd4rZ6FkwEgERFQ for Tools, Machinery, and Equipment for the Residual Plastic Recovery System
UNDPJordanFrist: 10. Sept.Background of Residual Plastic Recovery System (RPRS) UNDP is supporting sustainable solid waste management interventions in Cox’s Bazar, including efforts to improve resource recovery and reduce the volume of waste requiring final disposal at sanitary landfill sites. As part of this effort, UNDP plans to introduce Residual Plastic Recovery Systems (RPRS) at two locations: the Sanitary Landfill Site in Camp 20 Extension, Ukhiya, and the Teknaf Material Recovery Facility (MRF) Site near Boat Ghat Bazar, Teknaf, Cox’s Bazar. The RPRS is designed to support the recovery and processing of residual plastic and polythene waste generated from camp-based and municipal solid waste management systems. The system will help recover plastic-rich waste fractions that would otherwise be sent to landfill and process them through cleaning, crushing, washing, drying, extrusion and pelletizing. Through this process, loose residual plastic and polythene waste will be converted into a more concentrated and manageable form, such as processed plastic blocks or pellets. This will make the recovered plastic easier to store, transport and link with relevant recycling markets, where it can be used as raw material for further production. In this way, the RPRS will help improve the marketability of residual plastic waste and support circular economy opportunities. By reducing the volume of loose plastic waste entering the landfill, the RPRS is expected to help preserve remaining landfill capacity and improve landfill operations. It will reduce bulky, loose and difficult-to-compact plastic waste, thereby making compaction, covering and overall landfill management more stable and efficient. To ensure effective operation, the RPRS will require appropriate infrastructure, equipment, operational space, utility support, drainage, ventilation, occupational safety measures and environmental protection arrangements. The facilities will include provisions for receiving and temporarily storing raw plastic waste, feeding and processing materials, operating and maintaining machinery, moving workers and materials safely, and storing processed plastic materials and pellets. The proposed procurement packages under the RPRS will support the establishment of the required civil infrastructure, solar-based power system, and operational tools, machinery and equipment. Together, these packages will enable the installation and operation of the RPRS facilities and contribute to improved residual plastic recovery and more sustainable solid waste management in Cox’s Bazar. Interested suppliers must submit their offer directly in the system as instructed in the solicitation document, following the instructions in the available user guide. In case you have never registered before, you can register a profile using the registration link shared via the procurement notice and following the instructions in guides available in the UNDP website: https://www.undp.org/procurement/business/resources-for-bidders. Do not create a new profile if you already have one. Use the forgotten password feature in case you do not remember the password or the username from previous registration. Search for the specific tender using search filters and subscribe to the tender in order to get notifications in case of amendments of the tender document. If you need support with the online system, you can contact the contact details of this tender as indicated in the solicitation document. UNDPBD Procurement Unit26/338A Single Party Framework Agreement for a Multi Material Drop-On-Demand (DoD) Inkjet 3D Printing System for Atlantic Technological University
Atlantic Technological UniversityLetterkennyFrist: 04. Sept.The Contracting Authority proposes to engage in a competitive process for the establishment of a single operator framework agreement for the supply, installation, and commissioning of a Multi Material Drop-On-Demand (DoD) Inkjet 3D Printing System to support research and development activities. Please refer to the attached documentation for further informationAgreement for the Design, Supply and Implementation of an Automated Warehouse System – ICM 2.0 and a Call-off Contract for the Maintenance.
Fluxys Belgium n.v.EtterbeekFrist: 29. Sept.The ICM 2.0 project consists of the implementation of a new automated pallet warehouse for the Fluxys Intervention Centre, ensuring reliable 24/7 material availability. The scope includes the design, supply, automation, software, system integration, implementation and supporting services, as well as a maintenance contract for the automated warehouse system, to ensure a high-availability and future-proof warehouse operation.Manufacturing and Supply of Diagnostics Components
The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy')BarcelonaThe scope of this framework contract includes: manufacture to build-to-print specifications of components and assemblies; supply of COTS or customized items to functional specifications; factory acceptance testing; cleaning, packing and shipping for the following ITER diagnostics and subsystems: equatorial visible/IR wide-angle viewing system (WAVS); collective Thomson scattering system (CTS); vacuum vessel electrical feedthroughs; and bolometer installation templates.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 26. August 2036.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Gas Networks Ireland.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.