The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy')BarcelonaTED
Manufacturing and Supply of Diagnostics Components
The scope of this framework contract includes: manufacture to build-to-print specifications of components and assemblies; supply of COTS or customized items to functional specifications; factory acceptance testing; cleaning, packing and shipping for the following ITER diagnostics and subsystems: equatorial visible/IR wide-angle viewing sy...
Typ: Ausschreibung
Generatoren, Armaturen, Messtechnik
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy')
- Veröffentlicht:
- 28. Juli 2026
- Frist:
- Nicht angegeben
- Thema:
- Generatoren
Ausschreibungsbeschreibung
The scope of this framework contract includes: manufacture to build-to-print specifications of components and assemblies; supply of COTS or customized items to functional specifications; factory acceptance testing; cleaning, packing and shipping for the following ITER diagnostics and subsystems: equatorial visible/IR wide-angle viewing system (WAVS); collective Thomson scattering system (CTS); vacuum vessel electrical feedthroughs; and bolometer installation templates.
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
6 Datenbereiche verfügbar
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Unterlagen
Freischalten50 Angaben erfasstUnterlagen · Dokumentenpaket
Auftraggeber
Freischalten3 Angaben erfasstAuftraggeber · Anschrift · Kontakt
Lose
Freischalten1 Angabe erfasstLose LOT-0001
Verfahrensdaten
Freischalten6 Angaben erfasstBekanntmachungsnummer · Verfahrensreferenz · Referenz des Auftraggebers · Verfahrensart · +2 weitere
Bieter und Auftragnehmer
Freischalten2 Angaben erfasstBieter und Auftragnehmer · Anschrift
Veröffentlichungsstelle
Freischalten3 Angaben erfasstVeröffentlichungsstelle · Anschrift · Kontakt
Ähnliche Bekanntmachungen
5Multiple framework contracts in cascade for the development and supply of the ITER in-vessel viewing and metrology system (IVVS)
The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy')BarcelonaDesign, manufacturing, delivery, on-site integration, commissioning and final acceptance tests of the in-vessel viewing system (IVVS), one of the remote handling systems to be delivered in kind to ITER by the European Domestic Agency.Supply of the Electron Cyclotron Upper Launchers and Ex-Vessel Waveguides of ITER
The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy')BarcelonaThis procurement procedure is for the award of a framework contract (FWC) for the design finalisation and supply of the Electron Cyclotron (EC) Upper Launchers and ex-vessel waveguides of ITER. The Electron Cyclotron Upper Launchers and ex-vessel waveguides comprise the four EC upper launcher plug systems including the structures and shields, mirrors, waveguides, feedthroughs and services of ports UL12, UL13, UL15 and UL16 and the ex-vessel waveguide assembly including mm-wave transmission elements, windows and valves, supporting structures and services of the same four upper launchers plus the ex-vessel waveguides assembly of the equatorial launcher of the port EW14. The electron cyclotron upper launchers and ex-vessel waveguides of port UL16 are first plasma components. The scope of the FWC will be implemented through the award of specific contracts under the FWC for the manufacturing design, raw material procurement, manufacture, assembly, testing and delivery of the port plug structure, the blanket shield module, mirrors 1 and 2 and ancillaries and the final and manufacturing design, raw material procurement, manufacturing, testing and delivery of the mirrors 3 and 4, in-vessel waveguides and closure plate subplate of the port plug system and the ex-vessel waveguides system.LA3705C - CFT - SETU - Supply, Delivery, Installation and Commissioning of a Replacement Equipment for the SEAM Research Centre, [3 Lots]
Education Procurement Service (EPS)LimerickFrist: 10. JuliTenders are sought for the Supply, Delivery, Installation and Commissioning of 3 lots: Lot 1 - Replacement of a High-Resolution X-Ray Computed Tomography (CT) System. Lot 2 - High-Definition Bench-top Digital Microscope System Lot 3 – Replacement of Detector for the GE VTomex L300 Industrial CT System The new equipment must be delivered and installed on the ground floor of SEAM facilities located in the Applied Technology Building on the main campus of SETU Waterford. The contracting authority will take care of all works regarding laboratory preparation (required construction works). For Lots 1 - 3 It is required for the after award the winning Tenderer to conduct an evaluation of the site and site access at SETU and advise SETU of any alterations to services at the location that may be required, prior to delivery and installation. This can be partially or wholly facilitated remotely as required. Date and time to be confirmed with SETU and the winning tenderer. Please confirm compliance. The tenderer MUST allow access to the facilities (supplier site) to witness the factory acceptance testing of the equipment. In case the contracting authority decides not to attend in person, the tenderer will be asked to supply a certificate of the successful factory testing.APECS/INL 09 (JN) CONTRACT FOR THE SUPPLY AND INSTALLATION OF EQUIPMENT AND COMPONENTS WITHIN APECS (ADVANCED PACKAGING AND HETEROGENEOUS INTEGRATION FOR ELECTRONICS COMPONENTS AND SYSTEMS) PILOT LINE
INL - INTERNATIONAL IBERIAN NANOTECHNOLOGY LABORATORYBragaFrist: 15. JuliThe subject matter of this contract is the supply and installation of scientific equipment and components to INL, listed below and detailed in Schedule V attached to these Standard Specifications (from now on referred to as ‘Specifications’). The equipment listed in Schedule V are the lots that the tender comprises. Tenderers may bid for one or more lots. The subject matter of the contract, in all cases, does not include so-called refurbished scientific instruments and equipment. The lots comprising the tender are as follows: o Lot 1 (Full System) - Pulsed Optically detected Magnetic Resonance (ODMR) microscope platform and components. o Lot 1.1 - Laser Sources o Lot 1.2 – Optical o Lot 1.3 – Optomechanics o Lot 1.4 - Inverted microscope structure with micro and nano positioner (XYZ) o Lot 1.5 - Microscope Objective o Lot 1.6 – External Hardware o Lot 1.7 - External Hardware o Lot 1.8 - External Hardware o Lot 1.9 - External Hardware o Lot 1.10 - Electronics o Lot 1.11 - External Hardware o Lot 1.12 - External Hardware o Lot 1.13 - External HardwareSupply, Installation and maintenance of a PEM Electrolyser for Hydrogen Production at JRC Ispra
European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsFrist: 25. JuliThe procurement entails the design, manufacturing, delivery, installation, and commissioning of a Proton Exchange Membrane (PEM) electrolysis system for hydrogen production at the JRC Ispra site. The core of the system is a 50 Nm3/h electrolyser (which must be upgradable to 100 Nm3/h) that delivers hydrogen at an outlet pressure of 30 barg. The main equipment will be delivered in a containerized/skid version divided into three specific areas: a control panel area with the AC/DC converter, a water purification unit, and an ATEX-classified area containing the stacks and gas purification treatment. In addition to the containerized unit, the scope of supply includes several external components: - An MV/LV transformer - A thermal management system (dry cooler) - A low-pressure hydrogen storage system consisting of a cylinder rack at 30 bar with a total volume of 5 m3 - A gas blender installed on the outlet piping after the storage Finally, the procurement includes a comprehensive service package covering the Factory Acceptance Test (FAT), Site Acceptance Test (SAT), ATEX verification, staff training, two years of spare parts, and a 3-year maintenance contract. Reason for Purchasing The primary objective of this procurement is to produce green hydrogen by harnessing the renewable energy generated from the JRC Ispra site's internal photovoltaic (PV) plant. Currently, the site has a 1.35 MWp PV installation, which is planned to be expanded to 2 MWp and eventually 3 MWp in the future. Instead of using battery systems, the JRC intends to use the excess energy from this PV plant to power the electrolyser for self-consumption. The hydrogen produced will then be blended into the natural gas pipeline (up to a 10% volume blend) to feed the site's co-generators. A dedicated technical sizing analysis concluded that a modular 2x250 kW electrolyser is the optimal choice, as it offers the best compromise between the available PV power, the number of operating hours, and the demand from
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy').
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.