Education Procurement Service (EPS)LimerickTED
LA3839C - CFT - UCD - Supply, Installation, and Commissioning of a Two-Stage Anaerobic Digestion System (TSAD)
University College Dublin request the supply and delivery of Anaerobic Digestion System this will be an element of a pilot plant facility which will be used by industry, entrepreneurs and researchers to validate and scale new technologies/processes to convert Ireland’s natural land and sea resources (including agri-food processing by-prod...
Angebotsfrist: 21. August 2026 (abgelaufen)Typ: Ausschreibung
Generatoren, Pumpen, Verfahrenstechnik
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Education Procurement Service (EPS)
- Veröffentlicht:
- 30. Juli 2026
- Frist:
- 21. August 2026
- Thema:
- Generatoren
Ausschreibungsbeschreibung
Vollständige Beschreibung anzeigenBeschreibung einklappen
University College Dublin request the supply and delivery of Anaerobic Digestion System this will be an element of a pilot plant facility which will be used by industry, entrepreneurs and researchers to validate and scale new technologies/processes to convert Ireland’s natural land and sea resources (including agri-food processing by-products) to products of high value for use in a wide variety of sectors. The Anaerobic Digestion Systems will be used to create databases to demonstrate feasibility, capacity, efficiency and economic viability of process and produce samples for technical use. The winning tenderer MUST conduct an inspection test of the equipment and necessary components after installation at the site. Validation requirements: ● Pressure and leak test verification ● Electrical installation and loop test verification ● Pump and agitator performance test verification ● Pressure equipment technical documentation and product contact materials ● Control loop test and PLC ● Alarm/interlock verification Date and time to be confirmed with UCD and the winning tenderer.
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
7 Datenbereiche verfügbar
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Unterlagen
Freischalten50 Angaben erfasstUnterlagen · Dokumentenpaket
Auftraggeber
Freischalten3 Angaben erfasstAuftraggeber · Anschrift · Kontakt
Lose
Freischalten1 Angabe erfasstLose LOT-0001
Verfahrensdaten
Freischalten5 Angaben erfasstBekanntmachungsnummer · Verfahrensreferenz · Verfahrensart · Auftragsart · +1 weitere
Ausführungsorte
Freischalten2 Angaben erfasstAusführungsorte
Bieter und Auftragnehmer
Freischalten3 Angaben erfasstBieter und Auftragnehmer · Anschrift · Kontakt
Veröffentlichungsstelle
Freischalten3 Angaben erfasstVeröffentlichungsstelle · Anschrift · Kontakt
Ähnliche Bekanntmachungen
9LA3705C - CFT - SETU - Supply, Delivery, Installation and Commissioning of a Replacement Equipment for the SEAM Research Centre, [3 Lots]
Education Procurement Service (EPS)LimerickFrist: 10. JuliTenders are sought for the Supply, Delivery, Installation and Commissioning of 3 lots: Lot 1 - Replacement of a High-Resolution X-Ray Computed Tomography (CT) System. Lot 2 - High-Definition Bench-top Digital Microscope System Lot 3 – Replacement of Detector for the GE VTomex L300 Industrial CT System The new equipment must be delivered and installed on the ground floor of SEAM facilities located in the Applied Technology Building on the main campus of SETU Waterford. The contracting authority will take care of all works regarding laboratory preparation (required construction works). For Lots 1 - 3 It is required for the after award the winning Tenderer to conduct an evaluation of the site and site access at SETU and advise SETU of any alterations to services at the location that may be required, prior to delivery and installation. This can be partially or wholly facilitated remotely as required. Date and time to be confirmed with SETU and the winning tenderer. Please confirm compliance. The tenderer MUST allow access to the facilities (supplier site) to witness the factory acceptance testing of the equipment. In case the contracting authority decides not to attend in person, the tenderer will be asked to supply a certificate of the successful factory testing.The supply of equipment to produce vehicle fuel from biogas at an anaerobic digestion plant
Rockbrook A.D. LtdBallyroanFrist: 06. Aug.Rockbrook A.D. Limited (Rockbrook) operates an anaerobic digestion (AD) plant at Ballyroan, Co Laois, Ireland. Rockbrook is inviting tenders for the supply, installation and commissioning of a complete system to produce renewable vehicle fuel from the biogas generated at the existing AD plant. The system shall include biogas upgrading, compression and/or other fuel conditioning equipment, together with fuel storage and dispensing facilities.PQQ for the Design, Supply, Installation and Commissioning of a Flue Gas Abatement System at Medite Europe DAC
Medite Europe DACClonmelFrist: 26. JuniMEDITE Europe DAC is invites expressions of interest from experienced and qualified companies for the design, supply, installation and commissioning of a flue gas abatement system and associated ancillaries for a biomass boiler installation. A system will be required to treat the boiler flue gas stream and reduce particulate emissions in order to support safe, reliable and compliant plant operation. The proposed solution shall be suitable for the defined operating conditions, including flue gas flow, temperature, moisture content and dust loading, and shall be capable of integration with the existing boiler, draft system, stack and plant control infrastructure. The scope is expected to include, as applicable, the main abatement equipment, inlet and outlet ductwork interfaces, support steelwork, access platforms, insulation, ash collection and discharge arrangements, instrumentation, controls, electrical integration, and all associated ancillaries necessary for a complete and operable system. The system should be designed to achieve the required emissions performance while maintaining acceptable pressure drop, operability, maintainability and safe access for inspection and maintenance. The proposed equipment must be of proven industrial technology and conform to best practice design principles and all relevant European legislation and standards, including CE marking where applicable. The successful contractor shall be expected to undertake detailed engineering, equipment manufacture and supply, delivery to site, erection, testing, commissioning, performance verification, operator training and handover of the complete system, together with the provision of all relevant drawings, manuals and technical documentation. It is anticipated that this pre-qualification process will be followed by technical proposal evaluation and a subsequent detailed tendering stage for the selected bidders.Single Supplier Framework Agreement for the Supply, Delivery, Installation, Commissioning and Calibration of a Bioreactor Suite for Bioprocess Optimisation and Digestion/Fermentation Modelling
University of Limerick_1124LimerickSingle Supplier Framework for the provision of Supply, Delivery, Installation, Commissioning and Calibration of Bioreactor Suites for Bioprocess Optimisation and Digestion/Fermentation Modelling for the University of Limerick (UL). The bioreactor platform must be capable of running parallel experiments in all the benchtop bioreactors with independent process control.LA3705C - CFT - SETU - Supply, Delivery, Installation and Commissioning of a Replacement Equipment for the SEAM Research Centre, [3 Lots]
Education Procurement Service (EPS)LimerickFrist: 17. JuliTenders are sought for the Supply, Delivery, Installation and Commissioning of 3 lots: Lot 1 - Replacement of a High-Resolution X-Ray Computed Tomography (CT) System. Lot 2 - High-Definition Bench-top Digital Microscope System Lot 3 – Replacement of Detector for the GE VTomex L300 Industrial CT System The new equipment must be delivered and installed on the ground floor of SEAM facilities located in the Applied Technology Building on the main campus of SETU Waterford. The contracting authority will take care of all works regarding laboratory preparation (required construction works). For Lots 1 - 3 It is required for the after award the winning Tenderer to conduct an evaluation of the site and site access at SETU and advise SETU of any alterations to services at the location that may be required, prior to delivery and installation. This can be partially or wholly facilitated remotely as required. Date and time to be confirmed with SETU and the winning tenderer. Please confirm compliance. The tenderer MUST allow access to the facilities (supplier site) to witness the factory acceptance testing of the equipment. In case the contracting authority decides not to attend in person, the tenderer will be asked to supply a certificate of the successful factory testing.Supply, delivery, installation and commissioning of specialised beauty equipment
Louth and Meath Education and Training Board 1384NavanThe Contracting Authority proposes to engage in a competitive process for the establishment of a single party framework agreement for the provision of supply, delivery, installation and commissioning of Specialised Beauty Equipment.2026 2749 - The Supply, Delivery, Installation/Assembly and Commissioning of Healthcare Equipment to Cavan Institute, which falls under the auspices of CMETB
Cavan and Monaghan Education and Training BoardMonaghanFrist: 04. Aug.The establishment of a contract for the Supply, Delivery, Installation/Assembly and Commissioning of Healthcare Equipment to Cavan Institute, which falls under the auspices of Cavan and Monaghan Education and Training Board. The detailed scope and technical requirements of this tender competition are outlined in Section A1.3 Specification of Requirements of this RFT. The requirements will be subject to funding availability.2026 2749 - The Supply, Delivery, Installation/Assembly and Commissioning of Healthcare Equipment to Cavan Institute, which falls under the auspices of CMETB
Cavan and Monaghan Education and Training BoardMonaghanFrist: 04. Aug.The establishment of a contract for the Supply, Delivery, Installation/Assembly and Commissioning of Healthcare Equipment to Cavan Institute, which falls under the auspices of Cavan and Monaghan Education and Training Board. The detailed scope and technical requirements of this tender competition are outlined in Section A1.3 Specification of Requirements of this RFT. The requirements will be subject to funding availability.Supply, Delivery, Installation and Commissioning of Offset Printing Press
Browne Printers Ltd (CA)LetterkennyFrist: 06. JuliBrowne Printers Ltd invites tenders for the supply, delivery, installation and commissioning of a sheetfed offset printing press The equipment must be suitable for high-volume commercial printing and include all necessary installation, commissioning, operator training, and warranty/support services. Full specifications and requirements are detailed in the tender documentation.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 21. August 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Education Procurement Service (EPS).
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.