Education Procurement Service (EPS)LimerickTED
LA3673C-UCC-CFT for the Supply of a Fully Integrated Precision Ferroelectric and Piezoelectric Analysis Platform
Tyndall National Institute, University College Cork requests the supply of a Precision Ferroelectric and Piezoelectric Analysis Platform, comprising of seven complementary subsystems with functionality requirements as follows 1. Measurement Core 2. Optical Metrology 3. Thermal Modules 4. HV Subsystem 5. Fixturing and Probing 6. Workstatio...
Submission deadline: August 31, 2026Type: Tender
Laboratory Instruments
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Education Procurement Service (EPS)
- Published:
- August 02, 2026
- Deadline:
- August 31, 2026
- Topic:
- Laboratory Instruments
Tender description
Show full descriptionCollapse description
Tyndall National Institute, University College Cork requests the supply of a Precision Ferroelectric and Piezoelectric Analysis Platform, comprising of seven complementary subsystems with functionality requirements as follows 1. Measurement Core 2. Optical Metrology 3. Thermal Modules 4. HV Subsystem 5. Fixturing and Probing 6. Workstation 7. Infrastructure The Platform must have the ability to perform comprehensive, high resolution ferroelectric and piezoelectric characterisation of ferroic materials, spanning bulk ceramics, ultrathin films and full wafers, across a broad temperature range. The primary purpose of this platform is to provide a unified, high performance infrastructure for the fundamental research and industrial benchmarking of advanced ferroic and piezoelectric materials. It will be utilised for the precision characterisation of material properties at various stages of development, from initial thin film growth and bulk ceramic synthesis to full wafer level device integration and reliability testing, supporting the development of next generation sensors, actuators, and beyond CMOS computing architectures. Materials with controlled ferroic responses are key to enabling next generation technologies. Ferroelectric and piezoelectric materials are vital for precision actuators, sensors, photonic systems, and non volatile memories, while multiferroics, combining electric and magnetic order, present transformative potential for ultra low power, non volatile logic and memory.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
7 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock1 detail capturedLots LOT-0001
Procedure data
Unlock5 details capturedPublication number · Procedure reference · Procedure type · Contract type · +1 more
Performance locations
Unlock3 details capturedPerformance locations
Bidders and contractors
Unlock3 details capturedBidders and contractors · Address · Contact
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
9LA3673C-UCC-CFT for the Supply of a Fully Integrated Precision Ferroelectric and Piezoelectric Analysis Platform
Education Procurement Service (EPS)LimerickDeadline: Aug 24Tyndall National Institute, University College Cork requests the supply of a Precision Ferroelectric and Piezoelectric Analysis Platform, comprising of seven complementary subsystems with functionality requirements as follows 1. Measurement Core 2. Optical Metrology 3. Thermal Modules 4. HV Subsystem 5. Fixturing and Probing 6. Workstation 7. Infrastructure The Platform must have the ability to perform comprehensive, high resolution ferroelectric and piezoelectric characterisation of ferroic materials, spanning bulk ceramics, ultrathin films and full wafers, across a broad temperature range. The primary purpose of this platform is to provide a unified, high performance infrastructure for the fundamental research and industrial benchmarking of advanced ferroic and piezoelectric materials. It will be utilised for the precision characterisation of material properties at various stages of development, from initial thin film growth and bulk ceramic synthesis to full wafer level device integration and reliability testing, supporting the development of next generation sensors, actuators, and beyond CMOS computing architectures. Materials with controlled ferroic responses are key to enabling next generation technologies. Ferroelectric and piezoelectric materials are vital for precision actuators, sensors, photonic systems, and non volatile memories, while multiferroics, combining electric and magnetic order, present transformative potential for ultra low power, non volatile logic and memory.CFT - 260187 Supply, Delivery (unloaded and positioned at the point of use), Installation, Commissioning, Training, Warranty and Maintenance of a GC\MS System for Analysis of Evolved Gases and Combustion Products from Solid Fuels - PEACEPLUS Funded
Finance Directorate - Queen's University BelfastBelfastDeadline: Aug 12The School of Chemistry and Chemical Engineering requires the procurement of a Gas Chromatography–Mass Spectrometry (GC/MS) system to support the analysis of volatile and semi-volatile compounds generated from the thermal decomposition and combustion of solid fuels and related materials. The system will form part of an integrated analytical capability under the PEACEPLUS Clean Air project, supporting research, method development, and future accredited testing activity. The primary function of the GC/MS system is to enable qualitative and quantitative analysis of evolved gases and combustion products, including volatile organic compounds, oxygenated species, and other trace emissions relevant to air quality and fuel characterisation. The system must be capable of operating as a standalone analytical platform and must also be compatible with a separately procured thermogravimetric analysis (TGA) system for evolved gas analysis workflows. The specification therefore includes requirements for interfacing, gas transfer, and handling of low-concentration, transient species.UCC-2025-28 Supply, Delivery, Installation, Commission, Calibration, and Validation of Integrated X-ray Photoelectron Spectroscopy (XPS) System with Collocated Raman Spectroscopy Module for TNI, UCC
University College CorkCorkDeadline: Jul 16Tyndall National Institute, University College Cork (UCC) invites tenders for the supply, delivery, installation, commissioning, and validation of an integrated X-ray Photoelectron Spectrometer (XPS) System with Collocated Raman Spectroscopy Module, comprising two primary components: (i) XPS Module: For chemical composition and electronic structure analysis of thin films (metal oxides and 2D materials) produced by Atomic Layer Deposition (ALD) facility within Europe’s first beyond-2 nm System-on-Chip (SoC) pilot line. (ii) Raman Spectroscopy Module: For structural, vibrational, and stress analysis of the same thin-film materials (metal oxides and 2D materials) from the atomic layer processing facility. This fully integrated system will provide essential complementary surface and bulk characterisation capabilities for next-generation ALD materials research within the pilot line facility.CFT 260003 Supply, Delivery (unloaded and positioned at the point of use), Installation, Commissioning, Training, Warranty and Maintenance of a GC\MS System for Analysis of Evolved Gases and Combustion Products from Solid Fuels
Finance Directorate - Queen's University BelfastBelfastDeadline: Jul 11The School of Chemistry and Chemical Engineering requires the procurement of a Gas Chromatography–Mass Spectrometry (GC/MS) system to support the analysis of volatile and semi-volatile compounds generated from the thermal decomposition and combustion of solid fuels and related materials. The system will form part of an integrated analytical capability under the PEACEPLUS Clean Air project, supporting research, method development, and future accredited testing activity. The primary function of the GC/MS system is to enable qualitative and quantitative analysis of evolved gases and combustion products, including volatile organic compounds, oxygenated species, and other trace emissions relevant to air quality and fuel characterisation. The system must be capable of operating as a standalone analytical platform and must also be compatible with a separately procured thermogravimetric analysis (TGA) system for evolved gas analysis workflows. The specification therefore includes requirements for interfacing, gas transfer, and handling of low-concentration, transient species.LA3215C-UCC-CFT for the Supply of a Suite of Plasma Etcher and Plasma Deposition Tools, 4 Lots
Education Procurement Service (EPS)LimerickDeadline: Jul 17Tenders are sought for the supply delivery, installation and commissioning of a suite of tools in 4 Lots for silicon-based and dielectric materials for University College Cork. The new plasma tools will enhance the capabilities at the Tyndall National Institute for the fabrication of semiconductor devices, especially silicon microelectronics and silicon MEMS, but also other materials such as germanium and silicon carbide. We invite proposals for the following lots; Lot 1 Plasma Etcher Silicon Dielectrics, advanced plasma etching system capable of etching for polysilicon poly-Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 2 Plasma Etcher Metals Piezoelectrics, advanced plasma etching system capable of etching for aluminium Al and alloys molybdenum Mo aluminium scandium nitride AlScN thin films using medium high-density plasma processes. Lot 3 Plasma Etcher Slow and Controllable Rate Atomic Layer Etch for Silicon Dielectrics, advanced plasma etching system capable of both conventional high-rate etching and slow and controllable rate atomic layer etching for silicon Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 4 Plasma Deposition PECVD, advanced plasma enhanced chemical vapour deposition system capable of depositing dielectric SiO2, SiN and amorphous a-Si thin films on semiconductor substrates. This equipment will be essential for etching and depositing a range of materials used in the fabrication of silicon microelectronics, silicon photonics and silicon MEMS devices. The ideal tools will offer precision, reliability, and efficiency to meet the requirements for etching and deposition on both 100 mm and 200 mm diameter wafers. Tenderers with cutting-edge solutions that can achieve these high standards are encouraged to submit their proposals for this vital component in our technological advancement.LA3215C-UCC-CFT for the Supply of a Suite of Plasma Etcher and Plasma Deposition Tools, 4 Lots
Education Procurement Service (EPS)LimerickDeadline: Jul 24Tenders are sought for the supply delivery, installation and commissioning of a suite of tools in 4 Lots for silicon-based and dielectric materials for University College Cork. The new plasma tools will enhance the capabilities at the Tyndall National Institute for the fabrication of semiconductor devices, especially silicon microelectronics and silicon MEMS, but also other materials such as germanium and silicon carbide. We invite proposals for the following lots; Lot 1 Plasma Etcher Silicon Dielectrics, advanced plasma etching system capable of etching for polysilicon poly-Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 2 Plasma Etcher Metals Piezoelectrics, advanced plasma etching system capable of etching for aluminium Al and alloys molybdenum Mo aluminium scandium nitride AlScN thin films using medium high-density plasma processes. Lot 3 Plasma Etcher Slow and Controllable Rate Atomic Layer Etch for Silicon Dielectrics, advanced plasma etching system capable of both conventional high-rate etching and slow and controllable rate atomic layer etching for silicon Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 4 Plasma Deposition PECVD, advanced plasma enhanced chemical vapour deposition system capable of depositing dielectric SiO2, SiN and amorphous a-Si thin films on semiconductor substrates. This equipment will be essential for etching and depositing a range of materials used in the fabrication of silicon microelectronics, silicon photonics and silicon MEMS devices. The ideal tools will offer precision, reliability, and efficiency to meet the requirements for etching and deposition on both 100 mm and 200 mm diameter wafers. Tenderers with cutting-edge solutions that can achieve these high standards are encouraged to submit their proposals for this vital component in our technological advancement.LA3215C-UCC-CFT for the Supply of a Suite of Plasma Etcher and Plasma Deposition Tools, 4 Lots
Education Procurement Service (EPS)LimerickDeadline: Jul 31Tenders are sought for the supply delivery, installation and commissioning of a suite of tools in 4 Lots for silicon-based and dielectric materials for University College Cork. The new plasma tools will enhance the capabilities at the Tyndall National Institute for the fabrication of semiconductor devices, especially silicon microelectronics and silicon MEMS, but also other materials such as germanium and silicon carbide. We invite proposals for the following lots; Lot 1 Plasma Etcher Silicon Dielectrics, advanced plasma etching system capable of etching for polysilicon poly-Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 2 Plasma Etcher Metals Piezoelectrics, advanced plasma etching system capable of etching for aluminium Al and alloys molybdenum Mo aluminium scandium nitride AlScN thin films using medium high-density plasma processes. Lot 3 Plasma Etcher Slow and Controllable Rate Atomic Layer Etch for Silicon Dielectrics, advanced plasma etching system capable of both conventional high-rate etching and slow and controllable rate atomic layer etching for silicon Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 4 Plasma Deposition PECVD, advanced plasma enhanced chemical vapour deposition system capable of depositing dielectric SiO2, SiN and amorphous a-Si thin films on semiconductor substrates. This equipment will be essential for etching and depositing a range of materials used in the fabrication of silicon microelectronics, silicon photonics and silicon MEMS devices. The ideal tools will offer precision, reliability, and efficiency to meet the requirements for etching and deposition on both 100 mm and 200 mm diameter wafers. Tenderers with cutting-edge solutions that can achieve these high standards are encouraged to submit their proposals for this vital component in our technological advancement.Analysis of the Health Platform
Helse- og omsorgsdepartementetOSLODeadline: Aug 17The Ministry of Health and Care Services would like an analysis of the Health Platform following up the Storting's decision: "The Norwegian Parliament asks the government to ensure that an independent, limited analysis is carried out so that the aim of the analysis shall be learning for equivalent projects and further improvement and further development of the Health Platform. This is to ensure the interaction, quality and efficiency goals in the services at all levels. The implementation and organisation of the analysis shall not affect ongoing improvements and further development of the Health Platform. The analysis shall refer to the existing knowledge basis." The aim of the analysis shall be learning for equivalent projects and further improvement and further development of the Health Platform. The objective is two parts: Part one focuses on the learning and improvement dimension for other equivalent projects. • Equivalent projects are to be understood as digitalisation projects in the health and welfare sector, but other sectors can also be relevant. We will use DFØ/the Project Wizard ́s definition of a digitalisation project. • The analysis shall emphasise what promotes and inhibits interaction and sharing of data across actors and levels. • The analysis shall point out the areas that have a value for learning, and identify and analyse the mechanisms that caused the known risk factors to have such major consequences. Furthermore, the analysis includes learning from all phases of a digitalisation project, including the procurement phase. • The analysis shall take the starting point in the targets of interaction, quality and efficiency in the services at all levels. • The analysis shall emphasise what promotes and inhibits interaction and sharing of data across actors and levels. Part two is about the Health Platform and is limited to • Improvement and further development of the Health Platform, and is not a decision basis for whether the Health Platform shall be discontinued or not. • See this part of the analysis for a programme for user friendliness and optimisation organised by the Health Platform. The analysis shallSupply, Delivery, Installation, Commissioning, and Validation of an Integrated Glove Box-Linked Dual Atomic Layer Deposition (ALD) Reactor System with Collocated Ellipsometer System for Tyndall, UCC
University College CorkCorkDeadline: Jul 24Tyndall National Institute, University College Cork (UCC) invites tenders for the supply, delivery, installation, Commissioning, Calibration and Validation of an integrated Atomic Layer Deposition (ALD), Glove Box, and Ellipsometer System, compromising four main components: (i) ALD Reactor 1: Designed for the deposition of 2D dichalcogenide materials, featuring process conditions and precursor delivery systems optimised for chalcogen-based chemistries. (ii) ALD reactor 2: Configured for the deposition of metal oxide films, designed for oxygen-rich precursor processes. (iii) Glove Box Module: Provides a controlled inert atmosphere that connects both ALD reactors, enabling contamination-free sample transfer and handling. (iv) Ellipsometer: Designed to operate both in-situ and ex-situ with each ALD reactor, allowing precise thin-film thickness and optical property characterisation for process monitoring, calibration, and validation. The system must be supplied and installed by the tenderer to ensure full system integration and operational compatibility for Tyndall National Institute. Together, this integrated system will form a key capability for atomic layer processing, supporting advanced thin-film deposition and real-time characterisation for next-generation materials research.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 31. August 2026.
- Who is the contracting authority?
- The contracting authority is Education Procurement Service (EPS).
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.