IOF
Kompakte Reflexionszelle - compact reflection cell
200-ns free-space delay reflection cell for 1550-nm. This system is to be combined with a time-bin loop architecture, as a delay line for the loop section. This system will be used to process Continious Variable states of light and is thus essential for it to have minimal losses and polarization stability. Kompakte Reflexionszelle - compa...
Submission deadline: September 11, 2026Type: Tender
Laboratory Instruments
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- IOF
- Published:
- August 27, 2026
- Deadline:
- September 11, 2026
- Topic:
- Laboratory Instruments
Tender description
200-ns free-space delay reflection cell for 1550-nm. This system is to be combined with a time-bin loop architecture, as a delay line for the loop section. This system will be used to process Continious Variable states of light and is thus essential for it to have minimal losses and polarization stability. Kompakte Reflexionszelle - compact reflection cell
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
5 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Related tenders
8Solar Simulator
Freistaat Bayern, vertreten durch die Friedrich-Alexander-Universität Erlangen-NürnbergErlangenThis call for bids concerns the supply of a solar simulator that produces the solar spectrum for applications in photoelectrochemistry, photocatalysis, and photovoltaic research. The system must be capable of both standalone operation and integration with a scanning probe microscope via a fiber optic coupling. The solar simulator must enable controlled photo-irradiation of samples from multiple directions (with respect to the samples), including top, lateral, and bottom illumination. This capability is required to support a wide range of experimental configurations.Digital microscopes
Dalarna Science ParkBorlängeDeadline: Sep 24The equipment covered by this procurement forms part of the establishment of the Materials Connection Arena (MCA), a new regional knowledge and innovation environment for advanced materials characterization, as well as industry-oriented research and collaboration in North Central Sweden. The initiative aims to strengthen the region's capabilities in research, innovation, skills development, and knowledge transfer by creating a shared platform through which academic institutions, research organizations, and industry stakeholders will gain access to advanced analytical equipment and specialist expertise. This procurement comprises two key instruments that will form an important part of the analytical infrastructure of the Materials Connection Arena: 1. A digital microscope system with integrated or fully compatible LIBS-based elemental analysis (Laser-Induced Breakdown Spectroscopy) for advanced optical characterization, dimensional measurement, documentation, failure analysis, and material identification. 2. A surface metrology and 3D surface characterization system for high-resolution measurement of surface geometry, surface roughness, topography, dimensional inspection, and comparison against CAD models and design specifications. They will be used for research, education and training, industrial problem-solving, product development, material selection, reverse engineering, failure investigations, quality assurance, and advanced characterization of metallic, polymeric, ceramic, composite, and emerging materials. Accordingly, the equipment shall be well suited for both academic research and industrial applications and shall be capable of supporting a broad range of current and future challenges in materials engineering, product development, and sustainable industrial transformation. The equipment is expected to contribute to strengthened collaboration between academia and industry and enable enhanced research, innovation, and development capacity for companies and hiRFP 250005 - TENDER FOR ACQUISITION OF COMPONENTS FOR ANECHOIC CHAMBER AND ITS ASSOCIATED COMMISSIONING AND TRAINING SERVICES
UNIVERSITE DU LUXEMBOURGEsch/BelvalDeadline: Aug 21The University of Luxembourg wants to acquire components for Anechoic Chamber and its associated commissioning and training services. In the entire present Tender File, it shall be noted that "Equipment" refers to the above-mentioned Anechoic Chamber. The Anechoic Chamber consists of all components acquired under the current Call for Tenders No. 250005. The Equipment will be used for antenna measurements, including but not limited to the following: radiation pattern, axial ratio, S-parameters, gain-in-band, and phase measurements. This Call for Tenders is aimed at concluding a Contract for supplies and services fixed at one (1) year as an initial warranty period, for the unique lot, in order to retain one Contracting Party known for its expertise in providing components for Anechoic Chamber and, also, performing their required associated services of commissioning and training. The Contract shall include the following unique lot: Acquisition of components for Anechoic Chamber and its associated commissioning and training services.26/338A Single Party Framework Agreement for a Multi Material Drop-On-Demand (DoD) Inkjet 3D Printing System for Atlantic Technological University
Atlantic Technological UniversityLetterkennyDeadline: Sep 04The Contracting Authority proposes to engage in a competitive process for the establishment of a single operator framework agreement for the supply, installation, and commissioning of a Multi Material Drop-On-Demand (DoD) Inkjet 3D Printing System to support research and development activities. Please refer to the attached documentation for further informationDeposition Tool 8 Inch
Freistaat Bayern vertreten durch die Technische Universität München, hier handelnd die Forschungs-Neutronenquelle Heinz Maier-Leibnitz (FRM II)GarchingDeadline: Oct 05The Technical University of Munich - Chair of Technical Physics E23/WMI will acquire a UHV cluster System for the fabrication of superconducting circuits on 8 inch'' wafers. The system must provide UHV conditions and has to include an HV load-lock chamber, a central handling chamber, a UHV chamber for the evaporation of Al thin films, a UHV chamber for sputtering of superconductors, a UHV chamber for oxidation, a UHV chamber for Ar ion milling, and a flipping station. The system must allow metalizing both sides of the wafers in situ, with minimal backside particle contamination. The wafers should only be touched on the side (edge gripping).Supply of the vault/cash operations equipment for strengthening institutional capacity of the Central Bank of Montenegro
Government of Montenegro, The Ministry of Finance, The Directorate for Finance, Contracting and Implementation of the EU Assistance Funds (CFCU)PodgoricaDeadline: Oct 08The subject of the contract is supply, delivery, unloading, siting and installation of the vault/cash operations equipment: machines and equipment for the protection of the euro, cash handling and gold testing. Contract is expected to contribute to the strengthening of the institutional capacities of the CBCG by ensuring smooth cash operation and continual functioning of the Vault. This assistance will support Central Bank of Montenegro to improve the operational risk and business continuity management by supplying new Vault/cash operation equipment and strengthen the institutional capacity to fulfill the requirements for alignment with EU central banking standards in the area of protection of euro against counterfeiting. Items required: South Lift + Table + Vacuum packer, Coin sorting machine, Banknote sorting and banding machine, Desktop banknote sorting machine, Desktop coin counter, Compact scale for coins. All items are specified and described in the Annex II – Technical specifications. For complete information about the minimum requirements, quantities, and other applicable conditions related to goods and services subject to this contract, please refer to the published tender dossier.Upgrade SAXS System
Institute of Science and Technology Austria (ISTA)KlosterneuburgUpgrade of a small angle X-ray scattering (SAXS) with Metal Jet source and a wide-angle detector - The first upgrade is installation of additional, stronger (higher flux) source in order to allow for high resolution small-angle measurements, in order to elucidate unambiguously determine structure of nanoparticle assemblies. The second upgrade is with additional wide-angle X-ray scattering (WAXS) detector in order to allow, in combination with current detector, for simultaneous measurement of short-range (atomic level) and long-range order.Microscale thermophoresis device
Oulun yliopistoOULUDeadline: Oct 09University of Oulu, Biocenter Oulu, seeks a spectral shift and microscale thermophoresis device to characterise qualitatively and determine quantitatively nanoparticle, including protein, interactions in the range of weak to tight binders in solution without immobilization (hereinafter referred to as the "device"). The device must enable the assessment of sample quality and aggregation and differentiating binding events from aggregation. The device will be used for analysis of interactions of fluorescence labelled proteins with small molecules and vesicles. The detection must be independent of the mass ratio of the binding partners. The device must enable fast screening of interactions as well as sensitive affinity measurement. The measurable dynamic range of dissociation constant must be at least in nM -mM range and binding affinity in at least nM -mM range. Low sample consumption (in order of 10 microlitre) and low nanomole of the labeled target is needed for the measurement. The device must enable detection of the interaction based on changes of emission spectrum of exited fluorophore under isothermal conditions and must be able to create a microscopic non-isothermal temperature field (temperature gradient) and determine nanoparticle including protein binding events based on the temperature related intensity change and fluorescence intensity change following thermophoresis under the thermal gradient. Intensity changes and/or spectrum shifts of the fluorescence probe versus ligand concentrations are measured and plotted to calculate the dissociation constant. The device must come with detailed documentation of all features. The device will be part of the Proteomics and protein analysis core facility infrastructure of Biocenter Oulu. The core facility has an open access policy, and the instrumentation and software must be easy to use and maintain. The device must include a user interface to control the operation. The device must be well suited to an academic multi-
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 11. September 2026.
- Who is the contracting authority?
- The contracting authority is IOF.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.