Freistaat Bayern, vertreten durch die Friedrich-Alexander-Universität Erlangen-NürnbergErlangen
Solar Simulator
This call for bids concerns the supply of a solar simulator that produces the solar spectrum for applications in photoelectrochemistry, photocatalysis, and photovoltaic research. The system must be capable of both standalone operation and integration with a scanning probe microscope via a fiber optic coupling. The solar simulator must ena...
Type: Tender
Measurement Technology, Laboratory Instruments
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Freistaat Bayern, vertreten durch die Friedrich-Alexander-Universität Erlangen-Nürnberg
- Published:
- August 20, 2026
- Deadline:
- Not specified
- Topic:
- Measurement Technology
Tender description
This call for bids concerns the supply of a solar simulator that produces the solar spectrum for applications in photoelectrochemistry, photocatalysis, and photovoltaic research. The system must be capable of both standalone operation and integration with a scanning probe microscope via a fiber optic coupling. The solar simulator must enable controlled photo-irradiation of samples from multiple directions (with respect to the samples), including top, lateral, and bottom illumination. This capability is required to support a wide range of experimental configurations.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
7 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock2 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock2 details capturedLots LOT-0001 · Lots LOT-0002
Procedure data
Unlock6 details capturedPublication number · Procedure reference · Buyer reference · Procedure type · +2 more
Performance locations
Unlock2 details capturedPerformance locations
Bidders and contractors
Unlock6 details capturedBidders and contractors · Address · Contact
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
8Solar Simulator
Freistaat Bayern, vertreten durch die Friedrich-Alexander-Universität Erlangen-NürnbergErlangenDeadline: Aug 13This call for bids concerns the supply of a solar simulator that produces the solar spectrum for applications in photoelectrochemistry, photocatalysis, and photovoltaic research. The system must be capable of both standalone operation and integration with a scanning probe microscope via a fiber optic coupling. The solar simulator must enable controlled photo-irradiation of samples from multiple directions (with respect to the samples), including top, lateral, and bottom illumination. This capability is required to support a wide range of experimental configurations.Supply and maintenance of a LED Solar Simulator for Photovoltaic Module Calibration
European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsDeadline: Aug 12The purpose of the contract is to procure supplies together with related maintenance services. The supply to be purchase is a LED solar simulator needed to calibrate large-area photovoltaic solar modules at STC (Standard Test Conditions). The simulator must conform to the International Electrotechnical Commission standard. It must have a tuneable spectrum with a spectral range and a minimum effective measurement area of a rectangle. The simulator must be capable of operating in both pulsed mode and continuous mode. The simulator must provide active module temperature control under continuous operation.Provision of Solar as a Service
An Post_391Dublin 1This is a call to competition by AN POST for the Provision of Solar as a Service Contract (SaaS) The Successful Tenderer shall deliver, operate, and maintain solar photovoltaic (PV) generation systems under a Solar-as-a-Service model. The objective is to reduce energy costs, improve sustainability performance, and support compliance with corporate and regulatory decarbonisation targets. An Post plans to install solar photovoltaic (PV) systems at up to 50 sites nationwide. Each site is expected to have an average system capacity of approximately 250 m² / 100–250 kWp (equivalent to ~11 kWp for smaller sites, scaling higher depending on roof size and energy demand).2026 NMBI RFT for Solar Power Panels Installation
Bord Altranais agus Cnáimhseachais na hÉireann Nursing and Midwifery Board of IrelandDublinDeadline: Sep 11The authority seeks proposals for the design, supply, installation, commissioning, and maintenance of a 37 kW (approx.) solar photovoltaic (PV) system to be mounted on the roof of the corporate offices in Blackrock, Co. Dublin. The system will be installed on a commercial property and must comply with all relevant Irish and EU standards.New Simulator Centre
SjöfartsverketNORRKÖPINGThe main object of the procurement is to procure a new simulator centre with service and support for up to 15 years.BMS/ITM/SIS REQ00088951 - UNDP Somalia - Solar PV System Expansion
UNDPJordanDeadline: Sep 17This project seeks to enhance the energy supply for the UNDP Somalia Country Office (CO) at the Hargeisa premises with renewable energy by supplying, installing, commissioning, and after-sales services for the turnkey Solar PV Expansion System. At present, the compound depends on the main grid, a 25 kWp array paired with a 60-kWh battery bank and two diesel generators (both 110 kVA). The vendor shall submit a comprehensive proposal for a turnkey solar PV solution based on the following scope of work:Supply and delivery of a solar PV system with a capacity of 13 kWp.Installation, User Acceptance Test (UAT), and Commissioning of the complete system.Integration of the complete system into the facility, the existing solar PV hybrid system & and existing power supply.Provision of bi-annual preventive maintenance visits and after-sales service by the local partner (for 3 years). Training of the users on system operation and basic maintenance to ensure first-level response and maintenance oversight.Important dates for this tender: Confirmation of participation in Site Visit and Bidders Conference: 31 August 2026, 2PM CESTPre-Bid Site Visit: 1 September 2026, 10AM local timeBidders’ Conference: 3 September 2026, 10AM CESTRequest for Clarification: 10 September 2026, COB CESTOffer Submission: 17 September 2026, 5PM CESTKindly review the attached Schedule of Requirements for all information regarding this tender. Evaluation will be done on a PASS/FAIL basis. Bidders must be available for clarifications in case there are questions related to the documents submitted. In case of a FAIL on a specific requirement below or in the SoR, the bid will be considered non-compliant.Photovoltaic and Battery Energy Storage System
daa plcDublinDeadline: Aug 24Provision of a Photovoltaic and Battery Energy Storage System at Dublin airport. As part of daa’s strategic commitment to enhancing energy resilience and advancing sustainability at Dublin Airport, this project seeks to deliver a large-scale Solar Photovoltaic (PV) installation integrated with a Battery Energy Storage System (BESS). This project will help support daa’s long-term vision of decarbonising airport operations and securing a reliable, self-sufficient energy supply. daa intent to establish a single supplier agreement for the provision of these works.Scanning Electron Microscope
Danmarks Tekniske Universitet - DTUKgs. LyngbyDeadline: Aug 31This tender concerns the acquisition of a scanning electron microscope (SEM) for a university facility that provides access to an extensive suite of nanofabrication and characterisation tools as one of its core purposes. Due to a recently identified bottleneck in the suite of high-end characterisation in the cleanroom, DTU wishes to acquire a SEM. This problem has arisen as the result of multiple breakdowns among the aging and current instruments thus exposing an unexpected vulnerability in the overall process flow of several of our commercial users. The instrument is intended to meet the characterization requirements of DTU’s key commercial customers. Accordingly, only a high-end system equipped with a field emission source, capable of delivering high emission at low energy spread, will be considered acceptable. The system must provide state-of-the-art lateral image resolution of 0.8 nm or better at an accelerating voltage of 15 kV, and 0.9 nm or better at 1 kV, both achieved without beam deceleration or sample bias and using the in-column secondary electron detector. The SEM must be compatible with samples originating directly from customer production processes and must therefore be capable of handling wafers with diameters of up to 200 mm. Typical substrate materials include silicon, fused silica, and quartz. These materials cannot be coated to reduce charging effects during SEM analysis, and the instrument must therefore be capable of imaging such non-conductive samples without the application of conductive coatings.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- No specific submission deadline is currently stated for this notice.
- Who is the contracting authority?
- The contracting authority is Freistaat Bayern, vertreten durch die Friedrich-Alexander-Universität Erlangen-Nürnberg.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.