Azienda Elettrica TicineseMonte Carasso
Engineering, Procurement, and Installation of a 50 MVAr, 150 kV Shunt Reactor
The contract includes the design, supply and installation of a 50 MVAr, 150 kV shunt reactor.(See the Tender Specifications.)
Submission deadline: September 23, 2026Type: Tender
Generators
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Azienda Elettrica Ticinese
- Published:
- July 22, 2026
- Deadline:
- September 23, 2026
- Topic:
- Generators
Tender description
The contract includes the design, supply and installation of a 50 MVAr, 150 kV shunt reactor.(See the Tender Specifications.)
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
5 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock1 detail capturedDocuments
Buyer
Unlock3 details capturedBuyer · Address · Contact
Procedure data
Unlock4 details capturedPublication number · Procedure reference · Procedure type · Contract type
Performance locations
Unlock2 details capturedPerformance locations
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
10NEA and SLF02 – Procurement of 400 kV and 132 kV cable systems
Energinet Eltransmission A/SFredericiaThe Contracting Authority wants to purchase delivery of approximately 490 km 400 kV single core cable XLPE-insulated land cable and 15 km 132 kV single core XLPE-insulated land cable, joints and terminations and installation of joints and terminations. The deliverables are divided into three lots: Lot 1 – NEA, Lot 2 - NEA and Lot 3 – SLF02. The scope of the three tendered lots are described in detail in the enclosed tender documents. For further detail regarding the purchase, reference is made to the tender documents. However please note the following: The Contracting Authority will also accept solutions with a welded aluminum sheath. In case a welded aluminum sheath is offered, the sheath is allowed to carry the full fault current without the support of a wire screen. For further information see the technical requirements c.f. doc. no. 24/13859-18. It is possible to apply for prequalification for one, two or all three lots. The application should clearly state for which lot it concerns. Subsequent tenders may be submitted for Lots the tenderer is prequalified for. If an applicant applies for prequalification for all three Lots, but does not have the capacity for all, this must be clearly stated in the application. Please note that it is not possible to include a discount for being awarded more than one lot. If the same tenderer is evaluated with the highest score for more than one lot the tenderer will be awarded more than one lot provided the tenderer fulfils the aggregated minimum requirement for economic and financial standing cf. section 2.2.1 and section 4. The tender is divided into the following lots, and the value of the contracts is expected to amount to: • Lot 1 - NEA: Expected value: EUR 42,550,000.00 • Lot 2 – NEA: Expected value: EUR 42,550,000.00 • Lot 3 – SLF02: Expected value: EUR 28,200,00.00 For further detail concerning the purchase, reference is made to the tender documents.Procurement of a service contract for gas installations.
NTNUTrondheimNTNU shall enter into a framework agreement for the inspection and maintenance of gas installations for NTNU ́s buildings in Trondheim. The delivery and place of work for the deliveries will be NTNU in Trondheim. The gas installations included in this agreement are located in a total of 15 different buildings in Trondheim. The buildings are mainly located at Gløshaugen in addition to a small number on Brattøra and Øya. The service contract is administered by the property department at NTNU, but the gas installations are owned by different institutes and the work shall be invoiced directly to each individual institute/site owner, total 23 units. The facilities currently include approx. 269 gas centrals with a total of 1,484 call-offs. The contracting authority is different departments and faculty at NTNU, Rise PFI AS and Sintef, each of which is the owner and orderer for their plants. The contract shall be a complete service agreement that includes: • Annual systematic condition checks • Improvements, including maintenance and repairs, as well as minor expansions and changes in the existing installations, as needed. • Re-opening and shut-off of systems and components as needed, a complete description of the delivery is in the requirement specifications.Invitation to Tender for the Supply, Design, Installation and Commissioning of a Nurse Call System to St James’s Hospital.
St James's HospitalDublinThe Board of St James’s Hospital herein known as the Contracting Authority (CA) invites you to tender for the Supply, Design, Installation and Commissioning of a Nurse Call System with Preventative maintenance to contract for the St James’s Hospital MISA building.COSE1835.26 Supply, Delivery, Installation, and Maintenance of a wide-field microscope with a deconvolution system for University of Galway
University of Galway (ID 1400)GalwayDeadline: Jul 31It is intended that the framework will be used for all of University of Galway’s requirements for an integrated automated microscope imaging and analysis system. The contract will be to supply a wide-field microscope with deconvolution, along with a minimum of 5 years total warranty (1 year standard + 4 years extended). The scope of this tender includes a live cell imaging system and a minimum 5-year service contract. This will include all IT hardware and software necessary to run the system and provide tools for image analysis and deconvolution pipelines.Design, Supply, Delivery, Installation and Commissioning of a Marine and Environmental Skills Hub Laboratory
Kerry Education and Training BoardTraleeDeadline: Aug 28Kerry Education and Training Board requires a suitably qualified laboratory design and equipment specialist to undertake the design, supply, delivery, installation, integration, testing, commissioning and handover of a complete laboratory equipment solution for the Marine and Environmental Skills Hub.Procurement and installation of a Visitor Management System and Hot-desk Booking System
Environmental Protection AgencyWexfordDeadline: Sep 04The Environmental Protection Agency (EPA) is seeking tenders for the supply, installation, and commissioning of a Visitor Management System and Hot Desk Booking SystemSupply, Delivery, Installation, Commissioning, and Validation of an Integrated Glove Box-Linked Dual Atomic Layer Deposition (ALD) Reactor System with Collocated Ellipsometer System for Tyndall, UCC
University College CorkCorkDeadline: Jul 24Tyndall National Institute, University College Cork (UCC) invites tenders for the supply, delivery, installation, Commissioning, Calibration and Validation of an integrated Atomic Layer Deposition (ALD), Glove Box, and Ellipsometer System, compromising four main components: (i) ALD Reactor 1: Designed for the deposition of 2D dichalcogenide materials, featuring process conditions and precursor delivery systems optimised for chalcogen-based chemistries. (ii) ALD reactor 2: Configured for the deposition of metal oxide films, designed for oxygen-rich precursor processes. (iii) Glove Box Module: Provides a controlled inert atmosphere that connects both ALD reactors, enabling contamination-free sample transfer and handling. (iv) Ellipsometer: Designed to operate both in-situ and ex-situ with each ALD reactor, allowing precise thin-film thickness and optical property characterisation for process monitoring, calibration, and validation. The system must be supplied and installed by the tenderer to ensure full system integration and operational compatibility for Tyndall National Institute. Together, this integrated system will form a key capability for atomic layer processing, supporting advanced thin-film deposition and real-time characterisation for next-generation materials research.Geophysical surveys for installation engineering of Offshore Substations and Submarine Cable Routes (excluding Landfall)
RTE Réseau de Transport d’ElectricitéPARIS LA DEFENSE CEDEXGeophysical surveys for Offshore Substations and Submarine Cable Routes - Envisaged Period : Spring 2025. The lot 1 corresponds to the first wave of call for tenders specific to the geophysical surveys (excluding Landfall) to be carried out. The specific call for tenders may include more than one project. The Contractor will be in charge of full geophysical survey covering (i) the Submarine Cable Routes from Nearshore to Offshore Substation (min. 40 meters water depth) and (ii) Offshore Substation fondation, including : - Review or perform bibliographical studies - Review Employer data - Define the methodology of the Survey to be carried out with the appropriate tools - Produce Procedures (technical, QHSE, Management and operational) - Mobilize the correct means, in due time to meet the schedule constraints - Complete the Scope of Services as per Employer specification and schedule - Analyse data further to the operation and produce report to the Employer Organisation. Ability to work on several projects at once and ability to communicate efficiently are important and will be assessed during the call for tender process.SPD1/2026/015 - SUPPLIES TENDER FOR THE SUPPLY, DELIVERY AND INSTALLATION OF A CO2 LASER CUTTER/ENGRAVER FOR THE DEPARTMENT OF ELECTRONIC SYSTEM ENGINEERING AT THE UNIVERSITY OF MALTA
Department of ContractsFlorianaDeadline: Aug 06SPD1/2026/015 - SUPPLIES TENDER FOR THE SUPPLY, DELIVERY AND INSTALLATION OF A CO2 LASER CUTTER/ENGRAVER FOR THE DEPARTMENT OF ELECTRONIC SYSTEM ENGINEERING AT THE UNIVERSITY OF MALTAProcurement of process and project management for the implementation of a national public panel.
FinansdepartementetOsloDeadline: Aug 31The Ministry of Finance would like, on behalf of the Restructuring Commission, to enter into an assignment agreement with a Consultant for planning and implementing a participation process in the form of a national public panel. The assignment involves planning and designing the involvement process (the public panel), as well as ensuring the implementation and presentation of the panel ́s recommendations. The estimated value of the procurement is NOK 3,000,000 excluding VAT. The estimated value is not binding for the contracting authority. The contract period is from signing to implementation, feedback and evaluation, at the latest by the end of May 2027. See annex 1 of the contract for further details on the delivery.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 23. September 2026.
- Who is the contracting authority?
- The contracting authority is Azienda Elettrica Ticinese.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.