Dublin City CouncilDublinTED
DCC - Home Building Programme Contractor Multi Party Framework Agreement in 2 Lots A and B
Dublin City Council (“DCC”, the “Contracting Authority”) intends to establish two (2) four-year contractor multi-party framework agreements, namely, Lot A Framework and Lot B Framework (the “Frameworks”) for the delivery of a significant programme of housing projects (the “Programme”) utilising primarily the Design and Build (DB) delivery...
Residential Construction
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Dublin City Council
- Published:
- July 22, 2026
- Deadline:
- August 26, 2026
- Topic:
- Residential Construction
- Object:
- Mehrfamilienhaus / Wohnblock
Object classification
- Mehrfamilienhaus / WohnblockPrimary
Tender description
Show full descriptionCollapse description
Dublin City Council (“DCC”, the “Contracting Authority”) intends to establish two (2) four-year contractor multi-party framework agreements, namely, Lot A Framework and Lot B Framework (the “Frameworks”) for the delivery of a significant programme of housing projects (the “Programme”) utilising primarily the Design and Build (DB) delivery model. The Programme will form an important component of DCC’s direct social and affordable housing delivery pipeline for the period 2026–2030, consistent with the objectives set out in the Government’s new national housing plan, Delivering Homes, Building Communities. DCC has engaged the National Development Finance Agency (“NDFA”) to support the procurement and delivery of the Programme. 26 no. sites comprising approximately 4,000 units have been identified for inclusion in the Programme. Further sites may be added to the Programme over the lifetime of the Frameworks. The Frameworks will be established using a 2-stage restricted procurement procedure and will consist of the Lot A Framework and the Lot B Framework, with suitably qualified contractors appointed to each of the Frameworks. The Lot A Framework call off contracts capex values range from €100m to €250m, while call-off contracts under the Lot B Framework will have capex values of up to €100m. These capex value ranges may be adjusted as necessary over the period of the Frameworks in line with construction inflation. Applicants may apply to qualify for each Framework; however, applicants can only be shortlisted for one of the Frameworks. Applicants will be required to state their Framework preference at the pre-qualification submission stage. For example, if an applicant submits an application for both the Lot A Framework and the Lot B Framework and fulfils the pre-qualification requirements for both Frameworks, the applicant will only be shortlisted for their preferred Framework and will not be shortlisted for the other Framework. For further information please refer to t
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
7 data areas available
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock2 details capturedLots LOT-0001 · Lots LOT-0002
Procedure data
Unlock5 details capturedPublication number · Procedure reference · Procedure type · Contract type · +1 more
Performance locations
Unlock3 details capturedPerformance locations
Bidders and contractors
Unlock3 details capturedBidders and contractors · Address · Contact
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
8CFT to establish a Multi-supplier Frameworks for the provision of a Digital Leadership training Programme Services divided into 3 Lots
Skillnet IrelandDublinDeadline: Aug 05The Services comprise: for the provision of a Digital Leadership training Programme Services for itag Skillnet The Framework Agreement will be divided into three (3) Lots as follows: • Lot 1 – -Digital Women's Leadership Programme • Lot 2 – High Impact Leadership Programme • Lot 3 – Senior Leadership Programme Tenderers may submit a tender for one, two, or all three Lots. Each Lot will be evaluated independently, and one or more Framework Members may be appointed to each Lot.CFT to establish a Multi-supplier Frameworks Agreement for the Delivery of Work and Organisational Behaviour/Leadership Programme or equivalent divided into 3 Lots
BioPharmaChem SkillnetCorkDeadline: Jul 291.2.1 In summary, the Service comprise the establishment of a Multi-supplier Frameworks Agreement for the Delivery of Work and Organisational Behaviour/Leadership Programme or equivalent Divided into three lots that are outlined in the specification set out at Appendix 1 of this CFT. The Framework Agreement will be divided into three (3) Lots as follows: • Lot 1 - Higher Diploma (level 8), work and organisational leadership • Lot 2 – Certificate (level 8) work and organisational leadership • Lot 3 – Certificate in (level 7) work and organisational Behaviour Tenderers may submit a tender for one, two, or all three Lots. Each Lot will be evaluated independently, and one or more Framework Members may be appointed to each Lot.Multi-Party Framework for Architect and Engineer Led Integrated Design Teams in 2 Lots
Údarás Na Gaeltachta_289GalwayEstablishment of Multiparty Frameworks for Integrated Design Team (IDT) Services for Údarás na Gaeltachta in the following Lots: - Lot 1: Architect Led IDT for Counties Kerry, Cork and Waterford - Lot 2: Engineer (Civil and Structural) Led IDT for Counties Kerry, Cork and Waterford Tender candidates will be required to form a team of consultants for the provision of Architect Led IDT and Engineer Led IDT Services. Each framework agreement will be established with up to 5 economic operators. IDTs generally comprise of the following disciplines: - Architectural Services (lead for Architect Led IDT Services) and associated specialist skills, - Civil and Structural Engineering Services (lead for Engineering Led IDT Services) and associated specialist skills, - Building Services (Mechanical and Electrical) Engineering Services and - Quantity Surveying Services. The extent of other consultancy services and specialist skills service providers required for call-off commissions throughout the course of a Framework may vary depending on the range of services required. Call-off commissions may typically range from extension, refurbishment, repair, upgrade, new build, infrastructure and other type projects as required by the Contracting Authority within Gaeltacht regions. Scope of design services may extend from initial feasibility, through statutory approvals, full design to implementation and handover/close-out, and other technical services as may be required over the framework term. Each framework will be established for a period of three (3) years with the option to extend by one further year. Please refer to the enclosed documents for further particulars and requirements. A Prior Information Notice (PIN) was issued in respect of the above, reference: OJ S 94/2024 15/05/2024.Dublin City Council Multi-Party Framework Agreement for a Works Contractor for the construction of Nature Based Solutions for Dublin City Council Protection of Water Bodies Office
Dublin City CouncilDublinThe scope of this framework will include, but is not limited to, the construction of Nature based Solutions/Green Infrastructure in both parkland and residential/urban streetscapes and to act as PSCS. Projects with a value less than (or equal to) €50,000 will utilise a cascade method for call off contracts, whereas projects with a value greater that €50,000 which will utilise mini competitions for contract award. The establishment of this framework agreement is subject to the provisions of Directive 2014/24/EU and is being awarded using the Competitive Procedure with Negotiation. The Contracting Authority reserves the right to enter into negotiations with some or all applicants who submit a valid responsive tender. Negotiations may be held on all aspects of the service. However, they are under no obligation to do so and reserve to award the contract directly following receipt of initial tenders without recourse to negotiations with individual tenderers. For further information please refer to documentation available to download from www.etenders.gov.ie Resource ID xxxxxxx – Input when notice created .Dublin City Council Multi Party Framework Agreement for 4 Lots, for the provision of machinery maintenance and repair services)2025-2029
Dublin City CouncilDublinDublin City Council seeks to establish a Multi Party Framework Agreement for 4 Lots for the provision of machinery maintenance and repair services for a period of four years. The Framework Agreement will be established with 4 economic operators. The framework consists of approximately 300 pieces of machinery and equipment located at Park and Landscape Services Divisions works depots throughout the administrative area of Dublin City Council. The estimated annual spend is between €600,000 and €700,000 which includes labour and parts. This information is given as a guide only and DCC do not guarantee any volume of business arising out of contracts awarded through this process. Tenderers may apply for one or more lots Lot 1 – Agricultural Tractors Repair and maintenance as required of Agricultural tractors, mainly Massey Ferguson, Ursus, and Ford, Farmtrac, New Holland, SAME and Landini up to 90 horsepower (approx). Lot 2 - Grass Mowers/Compact Tractors Repair and maintenance as required of Compact Tractors and Ride-on mowers; mainly Kubota and John Deere models 18 horsepower to 30 horsepower approximately. Grass mowers include all types of grass mower such as pedestrian propelled rotary mowers, self propelled rotary/cylinder/flail mowers, tractor drawn rotary and gang cylinder mowers. Lot 3 – Handheld Equipment Repair and maintenance as required of chainsaws, strimmers, hedgecutters and other hand held equipment Lot 4 - General Equipment Includes all types of cultivators, fertiliser distributors, sprayers, chippers, trailers, beach cleaner, and other items used in parks development and maintenance. For further information please refer to documentation available to download from www.etenders.gov.ie Resource ID 5231091NCTR2680 Multi Party Framework Agreement for the provision of Real Estate and Property Management Consultancy Services for Technological University Dublin
Technological University DublinDublinDeadline: Aug 04Multi Party Framework for the provision of Real Estate and Property Management consultancy services for Technological University Dublin, in relation to any of the properties currently in TU Dublin’s portfolio and/or any other properties that might be of interest to TU Dublin. A minimum of 2 and up to a maximum of 5 suppliers may be appointed to the Framework.Multi-Party Framework Agreement for provision of Engineering Consultancy and PSDP Services for Building Services Projects (2026-2030)
Cork City CouncilCorkDeadline: Jul 27Multi-Party Framework Agreement for provision of Engineering Consultancy and PSDP Services for Building Service Projects associated with Civil, Structural, Architectural, Mechanical and Electrical Design Disciplines (2026-2030). To assist in achieving the obligations and targets as indicated above, the Council is now seeking to establish a Framework of suitably competent Engineering Consultants to deliver Civil, Structural, Architectural, Mechanical and Electrical (CSA and M+E) technical consultancy services. These services will be related, but not limited to, building decarbonisation, energy efficiency upgrades, heat pump integration, building services optimisation, PV feasibility, electrical upgrades, BMS strategy, and related technical advisory across the Local Authority’s building stock.Single Party framework Agreement for the Implementation, Licencing, Support and maintenance, Integration, Development and Training Services for the Autodesk software suite in use by DCC
Dublin City CouncilDublinDublin City Council (DCC) wishes to invite tenders using the Open Procedure to establish a Single Party Framework Agreement for the Implementation, Licencing, Support and maintenance, Integration, Development and Training Services for the Autodesk software suite in use by Dublin City Council. The period of the framework agreement will be for 4 years. Any contracts drawn down from the framework may last beyond the lifetime of the framework itself. An initial contract will be awarded for a period of 1 year with an option to extend for three further periods of 12 months, at the sole discretion of Dublin City Council, for the supply of the following items to support the Autodesk and Autodesk subsidiary product suite : · Autodesk Licensing Management · Support and Maintenance of the Autodesk Product Suite · Additional and Enhanced Support · Contract and Service Delivery Management · Training Services depending on department.. Please note that this project is subject to funding. For further information please refer to documentation available to download from www.etenders.gov.ie Resource ID 7118092
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 26. August 2026.
- Who is the contracting authority?
- The contracting authority is Dublin City Council.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.