BECHTEL POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄGdanskTED
Circulating Water Pumps (Concrete Volute)
The scope of work for this package consists of design, furnish material, fabricate, test, and deliver (9) vertical concrete volute pumps (based on European Materials, Codes and Standards) for each of the three nuclear power plants (NPPs) planned for the Poland AP100 Project. The Circulating Water Concrete Volute Pump, pumps brackish Balti...
Submission deadline: August 28, 2026Type: Tender
Pumps
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- BECHTEL POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ
- Published:
- July 28, 2026
- Deadline:
- August 28, 2026
- Topic:
- Pumps
Tender description
The scope of work for this package consists of design, furnish material, fabricate, test, and deliver (9) vertical concrete volute pumps (based on European Materials, Codes and Standards) for each of the three nuclear power plants (NPPs) planned for the Poland AP100 Project. The Circulating Water Concrete Volute Pump, pumps brackish Baltic Sea water to remove heat from the main condensers in a once through cooling system configuration. There are 9 total concrete volute pumps for the project site (3 x 33% per unit) with a rated flow of 21.3 m3/s (76,668 m3/hr), pump head of 22.5m, and design life of 60 years. There shall be physical model testing and shop performance testing on the pump.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
6 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock1 detail capturedLots LOT-0001
Procedure data
Unlock5 details capturedPublication number · Procedure reference · Procedure type · Contract type · +1 more
Performance locations
Unlock3 details capturedPerformance locations
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
10CWS Circulating Water Pumps (Concrete Volute)
BECHTEL POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄGdanskDeadline: Aug 19The scope of work for this package consists of design, furnish material, fabricate, test, and deliver (9) vertical concrete volute pumps (based on U.S. and European Materials, Codes and Standards) for each of the three nuclear power plants (NPPs) planned for the Poland AP100 Project. The Circulating Water Concrete Volute Pump, pumps brackish Baltic Sea water to remove heat from the main condensers in a once through cooling system configuration. There are 9 total concrete volute pumps for the project site (3 x 33% per unit) with a rated flow of 21.3 m3/s (76,668 m3/hr), pump head of 22.5m, and design life of 60 years. There shall be physical model testing and shop performance testing on the pump. NOTE: The estimates provided above are APPROXIMATE only. The intent is to give bidders an idea of the scale of the project. Deadline (Pre-qualification Submittal): September 2026 (Forecast – Subject to change) RFQ Document Issuance: November 2026 (Forecast – Subject to change) Supplier Proposals Due: January 2027 (Forecast – Subject to change) Order Award Date: April 2027 (Forecast – Subject to change) * After completion of the design submittals, the company is placed on hold until release for fabrication. The timing of the release is based on required fabrication and delivery lead times. Required Onsite Date: Unit 1: June 2032 (Forecast – Subject to change) Unit 2 & 3 will be further detailed in the RFQ package.Circulating Water System Intake Equipment Package
BECHTEL POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄGdanskDeadline: Aug 16The scope of work for this package consists of, but is not limited to, designing, furnishing material, fabricating, testing, and delivering complete and fully operational equipment, detailed as: a. Twenty-four (24) automatic dual flow type traveling water screens b. Thirty-three (33) trash racks c. Six (6) motorized trash rack raking systems with associated monorail and support d. structures. Two (2) raking systems per unit where each rake covers six (6) or five (5) trash racks e. Two (2) intake tunnel stop gates (1 per tunnel). Nine (9) circulating water pump suction stop gates. The traveling screens shall be designed for continuous, submerged service in brackish Baltic seawater to support a cooling water intake structure with a depth of 23m. Design conditions for Baltic Sea chloride concentration will be considered and specified further in the RFQ Package. There shall be material selection consideration to exposure conditions such as stagnation, biofouling, mussel formation, and frazil ice formation. NOTE: The quantities and dimensions provided above are APPROXIMATE only. The intent is to give bidders an idea of the scale of the project. Actual quantities and dimension numbers will be included in official bid package. Deadline (Pre-qualification Submittal): August 2026 (Forecast – Subject to change); RFQ Document Issuance: November 2026 (Forecast – Subject to change); Supplier Proposals Due: January 2027 (Forecast – Subject to change); Order Award Date: April 2027 (Forecast – Subject to change) * After completion of the design submittals, the company is placed on hold until release for fabrication. The timing of the release is based on required fabrication and delivery lead times. Required On Site Date: Unit 1: July 2032 (Forecast – Subject to change) Unit 2 & 3 will be further detailed in the RFQ package. Additional delivery schedule information will be provided in the RFQ PackageThe Coombe Hospital Water Tank Upgrade
The Coombe HospitalDublinDeadline: Sep 18The scope of this contract consists of the supply, delivery, installation, testing and commissioning of the complete mechanical services installation as shown on the Tender drawings and as specified in these documents for the installation of mains water pipework, pumps and water tanks in The Coombe Women’s Hospital, located in Cork St, Dolphins Barn, Dublin 8.CDS Condensate Pumps
BECHTEL POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄGdanskDeadline: Sep 10The scope of work for this package consists of, but is not limited to, designing, manufacturing and delivering complete and fully operational equipment, detailed as: condensate pumps for the Condensate System (CDS) serving three AP1000 nuclear generating units. The package is anticipated to include nine (9) vertical deepwell, multi-stage centrifugal pumps, arranged as three (3) pumps per unit in a 3 × 50% configuration, complete with drivers, accessories, testing, documentation, quality assurance, inspection, and delivery services. The equipment shall be suitable for installation in the turbine building, designed for long-term reliable operation in a nuclear power plant environment, and compliant with applicable European Union regulations, Polish codes, and relevant industry standards. Interested suppliers should demonstrate experience with comparable large-capacity vertical multi-stage condensate pumps and the capability to support a major nuclear new-build project. NOTE: The quantities and dimensions provided above are APPROXIMATE only. The intent is to give bidders an idea of the scale of the project.Connection of Townawilly Group Water Scheme Co-Operative Society to the Public Water Supply
Donegal County Council_1193LiffordThis project involves upgrading and restructuring the water supply infrastructure in the Townawilly area. The aim is to improve water quality, ensure compliance with regulatory standards, and deliver a more efficient and reliable water network. The contract includes the design and construction of an interconnector water main to connect the existing scheme to the Public Water Supply Scheme (PWSS) operated by Uisce Éireann (UÉ), which will allow for the decommissioning of the Townawilly Group Water Scheme (GWS) Water Treatment Plant. The contract also involves key upgrades to UÉ infrastructure, including construction of new watermain connections and a new booster pump station (PS) at the Glencoagh Storage Reservoir (SR) site to serve both the Glencoagh and Eddrim Glebe networks. Additionally, the Eddrim Glebe PS will be upgraded with new pumps and a change in the pumping arrangement.The Connection of Letterbrick to the Public Water Supply
Donegal County Council_1193LiffordDeadline: Sep 09Donegal County Council wishes to appoint an Engineering Services Provider (ESP) for the design of interconnector watermains for households and private Group Water Schemes (GWSs) located in Letterbrick to the closest point on the Public Water Supply, or other suitable location as determined by UÉ. The service is to include for all Civil and Hydraulic Design services as required; any environmental / ecological evaluations required; preparation and submission of any planning applications required; preparation of construction tender docs, administration of tender process (publication, clarifications, evaluation, etc.); award and management of construction contract. The ESP will also be required to act as PSDP for the Project.The Procurement of an Engineering Service Provider for the Connection of 16 Group Water Schemes in Donegal to the Public Water Supply and Taking in Charge of Same
Donegal County Council_1193LiffordDonegal County Council wishes to appoint an Engineering Services Provider (ESP) using the standard conditions of engagement COE1 for the design of interconnector watermains for three lots comprising 16 private Group Water Schemes (GWS)s to the closest point on the Public Water Supply. These GWS are located across the county. The service is to include for all Civil and Hydraulic Design services as required; any environmental / ecological evaluations required; preparation of construction tender docs, administration of tender process (publication, clarifications, evaluation, etc.); award and management of construction contract. The ESP will also be required to act as PSDP for the Project.Provision of Services for Electrical Maintenance Repair and Callout to 3 Landfill Sites and Leachate Infrastructure Maintenance in County Louth
Louth County Council_381DundalkLouth County Council has three closed landfills which are under licence by the EPA. At site Number 1-Whiteriver landfill, there are seven side slope risers each with a leachate submersible pump and level sensor. The depth of these pumps varies from between 30 and 80 metres. The Council as part of licence conditions are required to maintain a level below 1 metre in depth in each side slope riser sump. The lagoon level is required to be below 1.90 metres. All side slope risers and lagoons are linked by level sensors, programmable logic controllers and underground wiring to a scada system. The site is supplied by single and three phase supply. At this site there are several buildings including a weighbridge, internal and external WC, office, store, canteen, engine compound WC, engine compound switch room and engine compound store/office. Each building has lighting circuits and power outlet sockets (note no power outlet sockets in WC’s). In addition, there are several external lighting circuits, hot water boilers, fixed heaters and groundwater pumps. There are seven external control panels associated with the side slope risers and a number of external control panels associated with the aeration unit, surface water lagoon, generator switch over point, electrical kiosks. There are also several internal control panels in the office, weighbridge and engine compound rooms. At site Number 2- Drogheda landfill, there are two sumps used for pumping sewage and surface water. Both have a duty and standby pumps and associated control panels. At the flare compound there are electrical sockets and electrical panel which operates an air compressor. At site Number 3-Dundalk landfill there is one sump with a duty and standby pump plus associated control panel which pumps to the sewer. All sites will require one full electrical test during the duration of the contract and testing of RCBO’s every six months. Ropes and chains are tested every six months. The contract may require the isolation of pumps and the lifting of pumps at Drogheda and Dundalk every six months to facilitate testing and may require chain replacement.Construction Utility Ring (Power/Communications/ Water/ Sewage)
BECHTEL POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄGdanskDeadline: Sep 13Experienced and qualified Companies are invited to provide procurement and construction of temporary power, communications, potable water, raw water, and sewage networks. These works are required to support the construction of the Poland Nuclear Power Plant. The scope of work covers the procurement and construction of temporary networks to support the construction of the nuclear power plant located on the Baltic Sea coast. As a result, temporary solutions will be developed for electrical power distribution, communications, raw and potable water, and sewage networks, which will supply utilities to temporary buildings and installations during the construction period. Detailed design will be provided by Bechtel. The scope of work includes, but is not limited to: Preparation of submittals for approval of proposed materials, and of construction means and methods. Procurement of required materials for construction of the utility ring power, communications, raw water, potable water, and sewage networks. The estimated quantities of materials specified in the design: Installation of 15 kV MV cable line 12/20 kV cables, including earthworks – quantity: 18 500 m Construction of cable duct system 2 x HDPE Ø40 – quantity: 7000 m Construction of a water pipeline made of PE100 – quantity: 5000 m Construction of a pressure pipeline with a diameter from 110x6.6 mm to 250x14.8, installed by open trench excavation, including all associated earthworks – quantity: 2000 m Construction of the utility ring power, communications, raw water, potable water, and sewage networks in the field in accordance with: Bechtel’s requirements for subcontractors performing work on the project site, including the project safety plan and requirements regarding work hours Coordination with other subcontractors performing work at the project site. Construction work will require survey-layout of the work, and the other requirements as established by the work scope in the tender package, e.g. conformance with the site plan for construction stormwater/erosion-sediment control. Construction of the utility ring networks includes providing all required tools, equipment, labor, supervision, technical and professional services, materials, consumables, and supplies required to complete the installation. The detailed scope of work will be outlined in the tender package documents, including technical specifications, geotechnical data for use in design, and other contractual materials provided to the Company. Details such as environmental controls/requirements/restrictions, site access, laydown space, construction water/power, job trailer accommodation will be addressed in the tender package. Interested parties shall have documented, proven experience in successful construction work on large projects in difficult ground conditions. Subcontractors that will be considered must demonstrate ability to provide equipment and crews of sufficient type and number; and proven experience with all required quality, safety and execution documentation related to completion of the work. Bechtel notes that previous proven work of similar scale and complexity (which includes completion of comparable installations) will be mandatory. Pre-qualification will include evaluation of bidders’ comparable experience on previous similar projects. Interested Companies must register/update their Contractor's information in Bechtel's iSupplier portal at https://supplier.becpsn.com link and select commodity code UB00 as their specialty. If Contractor has any questions or intends to express interest in bidding this requirement, the Company shall notify Bechtel’s Contact Person. At that point, Bechtel shall provide the interested party the Poland Prequalification Questionnaire which Company would complete with response to Bechtel for review. The prequalification questionnaire includes a list of questions required to be considered as prequalified, and examples to include demonstration of (i) experience in providing the works in the past or current projects, (ii) safety record and compliance to quality requirements (see section 8), (iii) compliance to certification of legally mandatory requirements (including anti-corruption and sanctions), (iv) financial standing (solvency), and (v) organizational capabilities Upon Bechtel’s evaluation of your response to the Poland Prequalification Questionnaire, Bechtel will notify if your Company meets, conditionally meets, or does not meet the prequalification requirements that closely match the requirements. A Company's submission of Prequalification Questionnaire does not automatically qualify your Company to be prequalified. Bechtel reserves the right to exclude any of the following from this Competitive Bidding process: any economic operator that is directly or indirectly owned or controlled by an entity from a country not covered by the Government Procurement Agreement ("GPA") with the EU; or economic operators who rely in the Competitive Bidding process on capacities of any entities from countries not covered by the GPA with the EU. Such decision of Bechtel shall not be subject to complaint. Each prequalified Company will be required to execute a Non-Disclosure Agreement (NDA). Companies meeting the prequalification criteria and who have executed the NDA will be invited to submit proposals for Construction Utility Ring construction. The Request for Quotation (RFQ) shall include the award criteria, scope of work, specifications, drawings, datasheets, terms and condition, and schedule data. The RFQ shall be issued via Bechtel’s Digital Supply Chain System automation tool. The Company is required to have: ISO 9001 or equivalent ISO 45001 and ISO 14001 Seller’s activities will need to comply with Polish Law and National Standards. Proposal may be provided in EURO, PLN, USD. Furthermore, the proposals will be requested as firm fixed unit rates.E10 Evenes airport crossing
Statens vegvesenMossThe project E10 Evenes Airport Crossing comprises engineering design services for and the construction of new and safe access to Evenes airport for vehicles and soft road users. The contract includes: - Engineering design services - Construction of a detour road - Demolition of the existing Nautå bridge. - Construction of the upgraded E10, arm to the airport, partly raising the road in the current horizontal line, partly new construction of the road. - Two bridge constructions over the Nautå River T-junctions. - One-lane roundabout - Foot/cycle path along Flyplassveien - Access road to a new pump station and parking area. - System for handling surface water from roads, electrical installations and landscapes. - On behalf of the Fie (Joint Infrastructure Evenes): Engineering design services for and the construction of necessary municipal water and sewage pipelines. - Construction of a access screen for the Norwegian Defence and an option for an extension of this
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 28. August 2026.
- Who is the contracting authority?
- The contracting authority is BECHTEL POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.