Teagasc - the Agriculture and Food Development AuthorityCarlowTED
Bovine Respiration and Calorimetry Chambers
Teagasc invites tenders for the Supply, Delivery, Installation and Commissioning of six respiration and calorimetry chambers that are suitable for cattle (primarily dairy breeds, both lactating and non-lactating). The equipment must allow full recovery of gases (close to 100 per cent), and measurement of oxygen consumption and emissions o...
Type: Tender
Laboratory Instruments
Unlock documents for free
No credit card · Instant access
Content at a glance
Teagasc invites tenders for the Supply, Delivery, Installation and Commissioning of six respiration and calorimetry chambers that are suitable for cattle (primarily dairy breeds, both lactating and non-lactating). The equipment must allow full recovery of gases (close to 100 per cent), and measurement of oxygen consumption and emission...
- Tender type:
- Tender
- Contracting authority:
- Teagasc - the Agriculture and Food Development Authority
- Published:
- May 25, 2026
- Deadline:
- Not specified
- Topic:
- Laboratory Instruments
Tender description
Teagasc invites tenders for the Supply, Delivery, Installation and Commissioning of six respiration and calorimetry chambers that are suitable for cattle (primarily dairy breeds, both lactating and non-lactating). The equipment must allow full recovery of gases (close to 100 per cent), and measurement of oxygen consumption and emissions of carbon dioxide and methane from an individual animal. See attached Call for Tender documents for additional information.
Further details
After registration, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Documents and attachments
49 files recorded- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Related tenders
10- South Dublin County CouncilDublinDeadline: Aug 17
CFT 3960- Service Concession to Manage and Operate Ballymount Civic Amenity Waste Recycling Centre
South Dublin County council seeks a suitable qualified operator to run Ballymount Civic Amenity. The prime purpose of the contract is to provide households in South Dublin County with additional waste recycling and recovery opportunities. Improved recycling in the County will help meet Regional and National targets which ultimately will lead to a better environment for all citizens. The Contractor will also make full provision for the supply of the required waste handling equipment, repairs, replacement and maintenance of the equipment and the infrastructure included on site. The site is subject to a Waste Licence granted by the Environmental Protection Agency (EPA) and the successful tenderer will be required to operate the facility strictly in accordance with the terms of this Licence. Details of this Licence are available on the EPA website at http://www.epa.ie/terminalfour/waste/waste-view.jsp?regno=W0003-03 or Appendix 12 and should be noted by tenders prior to submission of their tender. The operator will be responsible for payment of the licence fees to EPA. - Innkjøp konsernbergenDeadline: Jul 31
Milk and milk products - consultation of competition documents
This applies to milk and milk products to production kitchens in Bergen municipality and associated collaboration partners. We request feedback on the proposed price form and price model. Consider whether this model will be appropriate and function according to intention. If the model is not considered suitable, we request concrete input on how the competition ought to be designed in order to ensure the best possible competition. At the same time it is important that the chosen system can be tested and followed-up during the contract period. See the attached price form. Price model: List prices shall be given for all of the tenderer's products within the product group milk and milk products, with the exception of butter and cheese. The Contracting Authority has defined the following product categories: * milk * cream * yoghurt * acidic products * other dairy products Tenderers shall provide discount rates for each of these categories. The contract price is to be determined as a list price less the offered discount for the relevant category. The same list prices and discount rates shall form the basis of completing the price form, which will be used for evaluating the tenders. The equivalent price mechanism shall also apply for new products included in the contract period. The contracting authority assumes that the tenderer ́s total assortment within the product group will be made available in the contract. The price list will be regulated half yearly according to the following index: 14700: Consumer price index, by product and service group, month and statistics variable. Sub-group level 1 01.1.4 Milk, cheese, eggs and other dairy products. The discount rates will be fixed throughout the contract period. Packaging sizes are required, which are adapted to the production kitchen. - Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbHEschborn
Expert platform for Ukraine"s EU alignment in the rule of law
The services to be tendered concern the management and operation of an expert platform to provide advisory services to Ukrainian government institutions responsible for managing the EU accession process. To this aim, the platform pools in three Short-Term Expert Pools (STEP) international and national expertise on the chapters and clusters of the acquis Communautaire most relevant to the rule of law. The relevant expertise which should be provided by the STEPs will focus on the following areas, but is not limited to: EU law as a distinct legal system and European integration in general; - Structure and functioning of Ukraine"s judiciary; - Fundamental rights in the EU and its Member States; - Law enforcement, particularly in relation to organised crime and illicit financial flows; - Anti-corruption measures, including asset recovery and management. Two additional STEPs with translators and interpreters support the work of the experts. The contractor will ensure the platform"s continued functioning and development with the aim to provide the requested expertise in a very short time. For each expert assignment, the contractor will develop Terms of Reference and expert profiles in line with the identified needs of Ukrainian partners as the basis for the identification of suitable experts. The contractor will be responsible for the continuous process of identification, pre-selection contracting, and mobilization of suitable experts with relevant expertise and experience to carry out these assignments. In addition, the service provider will maintain and manage the platform"s community management system, which facilitates cooperation between affiliated experts, including those engaged outside the five STEPs. This includes disseminating relevant updates, news, and resources on Ukraine"s EU accession process and legal harmonization; ensuring shared access to key documentation; promoting interactive exchanges among experts as well as coordinating all community management tasks in close cooperation with the project. - Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH
81322091-Technical advisory and capacity building services for a climate-sensitive circular economy in the Caribbean
2. Tasks and services Overall objective of the consultancy The consultancy strengthens the enabling environment for circular economy in the Caribbean by building institutional and technical capacity, guiding strategy and governance development, facilitating stakeholder collaboration and supporting the implementation of national roadmaps. It ensures public and private circular economy stakeholders are equipped to adopt climate-sensitive circular practices. The consultancy will provide high-quality advisory and training services, contributing primarily to Outputs 2, 3, and 4 of the project. Expected outcomes - Improved enabling conditions through institutional and technical capacity development at national and regional levels. - Strengthened technical, operational and managerial skills of public officials for planning, implementation and monitoring of circular economy measures. - Awareness and behavioural change among decision-makers, businesses, communities and end-consumers. - Enhanced regional learning, replication and exchange of best practices across Caribbean countries. Work Packages and tasks to be delivered Work Package 1: Capacity building for national actors The consultancy will strengthen the capacities of national stakeholders to design and implement circular economy approaches. This includes preparing a comprehensive situational analysis and a scoping report that identifies five strategic approaches across Dominica, Grenada, Guyana, Jamaica, and Saint Vincent and the Grenadines. The experts will provide technical input for an awareness programme targeting policymakers, highlighting the importance of circular and climate-sensitive waste management solutions. In addition, five national two-day workshops will be designed and delivered, one in each country, bringing together at least 100 participants, of whom at least 30 will be women. These workshops will initiate the drafting of country-specific roadmaps for selected strategic approaches. The consultancy will further support national stakeholders in reviewing and finalizing the five roadmaps, ensuring that they address governance, financing, risk management, monitoring and sustainability. Work Package 2: Advisory and capacity building for national waste management authorities Through this work package, institutional, technical, strategic and operational capacities of national waste authorities are strengthened. The consultancy will design and implement six three-day workshops, one in each project country, to support the development of concepts and incentive systems for a climate-sensitive circular economy. Each workshop will include seven structured sessions covering awareness-raising, capacity and competence development, technical implementation, financial feasibility, incentive design, monitoring and sustainability. Participation will include at least 40 staff members from national waste authorities, of which a minimum of 12 will be women. To promote regional peer learning, the consultancy will also organize two online sequential exchange sessions that facilitate the sharing of experiences and lessons learned among the six countries. Building on these efforts, the consultants will provide technical advice to finalize six national roadmaps and establish a monitoring mechanism to ensure effective and adaptive implementation. Work Package 3: Dissemination and communication support The consultancy will actively contribute to raising awareness and visibility of circular economy approaches in the Caribbean. Experts will participate as speakers or panellists in four regional or international events to present project experiences, lessons learned and recommendations. They will also contribute to the planning of four national, regional, or international conferences by proposing relevant topics, identifying suitable speakers and ensuring technical relevance of the programmes. In addition, the consultancy will provide expert input for three cross-country digital awareness campaigns targeting businesses and households. These campaigns will promote action options for climate-sensitive circular economy and the consultants ensure that materials are technically accurate, contextually adapted, and aligned with the project"s objectives and regional sector context. Deliverables and milestones - Scoping report - Awareness workshop content - Five national workshops and draft roadmaps - Finalized roadmaps - Six 3-day waste authority workshops with draft circular economy concepts - Two regional sequential online sessions - Finalized roadmaps and monitoring mechanism - Participation in 4 events and support to 4 conferences - Reviewed and validated awareness campaign materials - Danmarks Tekniske Universitet - DTUKgs. Lyngby
Raman Microscope for DTU Chemistry
The Technical University of Denmark (DTU) intends to acquire one complete high-resolution confocal Raman microscopy and spectroelectrochemical characterization system, including all associated hardware, software, accessories, installation, commissioning, training, and warranty. The system will support research and education activities within catalysis, electrochemistry, materials science, energy conversion, sustainable fuels, and chemical synthesis. The primary purpose is to enable advanced in situ and operando characterization of functional materials, catalyst surfaces, and catalytic interfaces under realistic operating conditions, including electrochemical environments, elevated temperatures, controlled gas atmospheres, liquid-phase operation, and flow conditions. The instrument shall provide high-sensitivity Raman spectroscopy and microscopy with high spectral and spatial resolution. The system must support characterization of solids, liquids, heterogeneous materials, catalyst surfaces, thin films, nanostructured materials, powders, and solid–liquid and solid–gas interfaces. The equipment shall further enable investigation of reaction intermediates, catalyst transformations, phase transitions, adsorbates, reaction microenvironments, and dynamic processes occurring during electrochemical and catalytic reactions. The system shall include a confocal Raman microscope with automated operation, high-resolution spectroscopic capabilities, motorized sample positioning, automated focusing, Raman mapping and imaging functionality, and support for multiple excitation wavelengths covering the visible and near infrared spectral range, including excitation wavelengths of approximately 532 nm, 633 nm, and 785 nm. The system must be capable of performing both point measurements and spatially resolved Raman imaging of heterogeneous samples with automated data acquisition. The acquisition shall include low-noise detector technology suitable for weak Raman signals, time resolved measurements, and quantitative analysis of both Stokes and anti-Stokes Raman scattering. The system shall provide access to ultra-low-frequency vibrational information (down to 10 cm-1) relevant for studying structural changes, lattice dynamics, catalyst phase transformations, interfacial species, adsorption phenomena, and local temperature effects at catalytic interfaces. The instrument shall further enable simultaneous investigation of chemical composition, structural dynamics, and local thermal phenomena under operating conditions through acquisition of both Stokes and anti-Stokes Raman spectra. The system shall support automated Raman mapping and hyperspectral imaging of heterogeneous samples with micrometre-scale spatial resolution and high positional accuracy. The system must enable investigation of catalyst heterogeneity, dynamic restructuring processes, spatial distributions of reaction intermediates, and structure–activity relationships during operation. The system shall support time-resolved and operando measurements through direct integration be-tween electrochemical instrumentation and the spectroscopic platform, enabling synchronized electrochemical control and Raman data acquisition. The system shall allow simultaneous monitoring of electrochemical parameters and spectroscopic responses during catalytic operation and provide direct correlation between catalyst state, reaction intermediates, local temperature, and electrochemical performance. The equipment shall be suitable for spectroelectrochemical investigations of electro-chemical reactions and interfaces under controlled operating conditions. The acquisition shall further include dedicated spectroelectrochemical accessories, electrochemical cells suitable for operando measurements, flow-compatible accessories, control software, data acquisition and processing software, computer workstation, vibration-isolated installation platform, and all components necessary for full operation of the instrument. The system shall be designed for long-term research use and support future expansion through additional optical components, detectors, excitation sources, analytical modules, environmental cells, and experimental accessories. Scope of supply: • One complete confocal Raman spectroscopy and microscopy system. • High-resolution spectrometer and detector system. • Multiple excitation wavelengths. • Automated sample positioning, focusing, and mapping capabilities. • Raman imaging and hyperspectral mapping functionality. • Ultra-low-frequency Raman measurement capability. • Stokes and anti-Stokes Raman measurement capability. • Integrated spectroelectrochemical measurement capability. • Electrochemical cell and associated accessories for operando measurements. • Instrument control, acquisition, synchronization, analysis, and visualization software. • Computer workstation and control electronics. • Optical table or equivalent vibration-isolated installation platform. • Installation, commissioning, training, documentation, and warranty. Quantity: One complete integrated Raman microscopy and spectroelectrochemical characterization system. - Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbH
81318145-Supporting Ukraine with data and analytical work to align with Paris Agreement and EU Environment and Climate Change goals
The tendered service is intended to ensure that the described outputs of the project can be implemented quickly, if needed, short-term, and based on scientifically sound analyses, experience and technical expertise. The Terms of Reference (ToR) is divided into five work packages. The specific tasks described under each work package are indicative, and their details will be determined as the project progresses and partner needs evolve. For flexible response, the future contractor must provide standing pools of short-term experts who can be deployed quickly in response to project demands. Work Package 1 is intended to provide flexible, rapid-response support to key stakeholders, primarily within ministries and associated institutions. Services include ongoing analytical support, economic and climate scenario development, briefings, brief assessments, etc. related to carbon or environmental taxes, emission trading, green recovery, EU alignment, just energy transition, electricity market design, CBAM, energy efficiency, and NDC processes. Work Package 2 focuses on supporting the EP facilitating the modernization of Ukraine's energy sector with emphasis on renewable energy. The contractor is expected to contribute new knowledge and policy insights, including but not limited to electricity tariff reforms, compensation mechanisms for vulnerable customers, governance of state-owned energy enterprises, renewable energy auction mechanisms, debt solutions, energy sector recovery options, CBAM, and municipal utility models. Work Package 3 supports MEPR in updating Ukraine's LTS, ensuring it reflects the latest developments, Ukraine"s recovery plan, and aligns with the NDC. The contractor will provide data collection and analysis, modelling, scenario development, and alignment support, in response to changes in context, policy, and technology. The contractor will also support capacity building in MEPR and stakeholder engagement processes. Work Package 4 addresses the challenges industrial emitters face in meeting EU environmental directives, including CBAM and IED. The contractor is expected to support companies to understand the impacts of these policies and implement decarbonization pathways. This WP includes economic modelling, cost-benefit analysis, development of sector-specific GHG reduction roadmaps, roadmaps on Best Available Techniques (BAT), Transposition of BAT Reference Documents (BREFs) into Ukrainian context, conducting training for environmental and energy managers, and awareness raising initiatives. Work Package 5 focuses on the facilitation of the involvement of stakeholders-private and public companies, civil society, think tanks-in policy discussions early in the legislative process. The goal is to foster acceptance and ensure diverse views are incorporated into decision-making. Across all work packages, flexibility, technical expertise, and stakeholder-centric approaches are key to responding effectively to evolving partner needs and the broader context of Ukraine's energy transition and EU integration. - Gas Storage Denmark A/SFredericiaDeadline: Jun 15
Gas Storage Denmark: Onshore Intervention Services related to wells on natural gas storage LOT 1-3: 2027-2034
Expected consumption: 4.360.000 EUR. Maximum value: 6.530.000 EUR if the contractual expansions of 2 x 25 % of the value are both activated. The overall purpose of the Framework Agreement is for Supplier to support Gas Storage Denmark (GSD) in the planning and execution of GSD's Reservoir logging and well diagnostics covering Pulsed neutron, Production Logging operations and data interpretation. Other E-line work such as Re-Perforating, Calliper of Tubing, Ultrasonic measurement, running Camera and leak detection can be expected in connection with yearly requirements for Pulsed neutron logging. GSD requires the Supplier to provide Integrated Wireline Trucks - accompanied, if possible - by a trailer fitted with all additional required equipment for the Works. This is to minimize additional trucks and personnel on the well site and to assure that transfer of equipment between wells can be conducted with minimum use of additional trucks and crane assistance. For more information see Appendix 2: Scope of Works LOT 1 (doc. no. 25/18898-1) and 2A: Technical and Functional Requirements LOT 1 (doc. no. 25/18898-2). The Contracting Authority wants to ensure robustness for Gas Storage Denmark regarding services of importance. For that reason, the Scope of Works for LOT 1 and LOT 2 are overlapping with specific tools that are required for investigation of the condition of the wells. The reasoning is that it should be possible for GSD to conduct additional investigations – and therefore minimize mobilizations – when already conducting services under the respective lot. Consequently, the Contracting Authority will not award LOT 1 and LOT 2 to the same Supplier. Tenders can be submitted for all lots, but the tenderers who have applied and been prequalified to both LOT 1 and LOT 2 are required to indicate an order of priority in the case they will have the most economically advantageous tender based on the best price-quality ratio for both LOT 1 and for LOT 2. In this case the applicant will be awarded the 1st priority lot but will be excluded from the evaluation of the 2nd priority lot. The priority is to be submitted by filling out the attached template: Template 4: Priority between LOT 1 and LOT 2 (doc. no. 25/12155-45) in connection with the submission of the initial tender – and only by tenderers who have applied and been prequalified to both LOT 1 and LOT 2. Considering the above-described limitations - subsequent contracts under the framework agreement will be awarded directly to the supplier who submitted the most economically advantageous tender, see section 4.1. For further details regarding the purchase, reference is made to the tender documents. Orientation Teams Meeting: A Microsoft Teams Orientation meeting regarding the application – including elaborations on chosen highlighted topics in the Tender Conditions will be conducted accordingly to the time schedule in section 1.2. Invitations to the meeting will be forwarded upon request via Comdia. Be aware that no technical questions will be answered at the meeting as this is purely an information meeting regarding the tender process. Site visit: As part of the preparation of applications for prequalification, it will be possible for applicants to visit Gas Storage Denmark’s two Sites in the time span indicated in the time schedule in section 1.2. Request to be forwarded via Comdia as soon as possible. - Gas Storage Denmark A/SFredericiaDeadline: Jun 15
Gas Storage Denmark: Onshore Intervention Services related to wells on natural gas storage LOT 1-3: 2027-2034
Expected consumption: 4.360.000 EUR. Maximum value: 6.530.000 EUR if the contractual expansions of 2 x 25 % of the value are both activated. The overall purpose of the Framework Agreement is for Supplier to support Gas Storage Denmark (GSD) in the planning and execution of GSD's Reservoir logging and well diagnostics covering Pulsed neutron, Production Logging operations and data interpretation. Other E-line work such as Re-Perforating, Calliper of Tubing, Ultrasonic measurement, running Camera and leak detection can be expected in connection with yearly requirements for Pulsed neutron logging. GSD requires the Supplier to provide Integrated Wireline Trucks - accompanied, if possible - by a trailer fitted with all additional required equipment for the Works. This is to minimize additional trucks and personnel on the well site and to assure that transfer of equipment between wells can be conducted with minimum use of additional trucks and crane assistance. For more information see Appendix 2: Scope of Works LOT 1 (doc. no. 25/18898-1) and 2A: Technical and Functional Requirements LOT 1 (doc. no. 25/18898-2). The Contracting Authority wants to ensure robustness for Gas Storage Denmark regarding services of importance. For that reason, the Scope of Works for LOT 1 and LOT 2 are overlapping with specific tools that are required for investigation of the condition of the wells. The reasoning is that it should be possible for GSD to conduct additional investigations – and therefore minimize mobilizations – when already conducting services under the respective lot. Consequently, the Contracting Authority will not award LOT 1 and LOT 2 to the same Supplier. Tenders can be submitted for all lots, but the tenderers who have applied and been prequalified to both LOT 1 and LOT 2 are required to indicate an order of priority in the case they will have the most economically advantageous tender based on the best price-quality ratio for both LOT 1 and for LOT 2. In this case the applicant will be awarded the 1st priority lot but will be excluded from the evaluation of the 2nd priority lot. The priority is to be submitted by filling out the attached template: Template 4: Priority between LOT 1 and LOT 2 (doc. no. 25/12155-45) in connection with the submission of the initial tender – and only by tenderers who have applied and been prequalified to both LOT 1 and LOT 2. Considering the above-described limitations - subsequent contracts under the framework agreement will be awarded directly to the supplier who submitted the most economically advantageous tender, see section 4.1. For further details regarding the purchase, reference is made to the tender documents. Orientation Teams Meeting: A Microsoft Teams Orientation meeting regarding the application – including elaborations on chosen highlighted topics in the Tender Conditions will be conducted accordingly to the time schedule in section 1.2. Invitations to the meeting will be forwarded upon request via Comdia. Be aware that no technical questions will be answered at the meeting as this is purely an information meeting regarding the tender process. Site visit: As part of the preparation of applications for prequalification, it will be possible for applicants to visit Gas Storage Denmark’s two Sites in the time span indicated in the time schedule in section 1.2. Request to be forwarded via Comdia as soon as possible. - Oslo kommune v/ Bydel GrünerløkkaOslo
Day centre transport by minibus of persons with dementia and disabilities.
PURPOSE AND SCOPE The aim of the procurement is to cover the need for transport services, including drivers and auxiliary zones, to and from day activities and senior centre offers in the district. There are 19 people with normal driving who need daily transport. This can be changed over time and changes will be reported once per ocean year. The maximum number of persons will not exceed 25. All transport shall be carried out by vehicles that are powered with electricity or hydrogen in order to reduce CO2 emissions and contribute to Oslo municipality ́s green profile. From 01.01.2025, all deliveries/assignments for Oslo municipality where transport is a part of the service, shall be undertaken by using zero emission (i.e. battery electric or hydrogen) or biogas technology that as a minimum fulfils euro class 6/ VI. The contract has an annual estimated value of NOK 1,500,000. The contracting authority draws attention to the fact that the estimate is based on previous consumption, historical data and the expected future need. This contract is valid for up to a maximum value of NOK 6,000,000, including any option for a 2 year extension. The estimate is only a guideline and is without obligation for the Contracting Authority. Transport of up to 19 people with up to 4 wheelchair users is required. The number can be changed with each new order made every six months. The change can be both a reduction of persons with a need for changing the number of wheelchair users, changing the number that shall be transported in the form of reduction and increase. An increase will normally not be more than 2 - 3 persons. The contracting authority envisages that two vehicles will be used for the assignment. According to the oslo municipality's rules, none of the vehicles can use fuel that is used. In addition to the drivers, the tenderer must offer a permanent person/helper who shall assist in transporting the users. An attendant from the day centre will also assist with the transport. The urban district orders day centre places every half year according to the district ́s need, and the district will notify the carrier of any changes when the order is made. The district has a maximum need of 12 places at Sofienberg day centre plus an attendant from the day centre and 7 at Økern day centre plus an attendant from the day centre. However, this may change over time. See the description of changes to the number of persons with a need for transport in point one. In total, Økern day centre has day places for 7 users with dementia, and Sofienberg day centre has day places for 12 users. The users shall be picked up and delivered all business days outside of Saturday and Sunday. Tenderers shall ensure daily transport of elderly persons between their residence and the following two day centres: Økern Day Centre (Kingosgate Residential and Rehabilitation Centre), Kingosgate 14-16 Sofienberg day centre (sofienberg centre), Helgesensgate 62. To and from Økern Day Centre: · 08:30 with 1 bus that picks up day centre users at their homes and drives them to the day centre within approx. 09:00. They will not be picked up at home until 08:30. · At 14:00, one bus will be picked up for the same people at the day centre and drive them home. To and from Sofienberg day centre · 09:00 with 1 bus that picks up day centre users at their homes and drive them to the day centre within approx. 10.00. · At 14:45 a.m., one bus will pick up the same people at the day centre and drive them home. There are up to 19 persons each day who shall be picked up and driven to the day centre. The number of persons going to Økern day centre and Sofienberg day centre will vary. The parties to the contract can reach agreement on other times. If the opening hours are changed, the date of transport to and from can be changed equivalently. Both centres are closed on weekends, public holidays, Christmas Eve and New Year's Eve. Before the assignment, employees at the day centres will make the tenderer aware of the needs of each user so that the transport can be adapted to this. It can, for example, be whether the user uses wheelchairs, type of wheelchairs, any need for stair climbers, need to be followed to the entrance door etc. Tenderers will get lists from the day centres with an overview of each user, addresses, any changes to lists and other necessary information about users. There will be some waiting time for the collection, as users may not always be ready on time. The users who use the tender will vary, and for this reason there will be some variation in which addresses the drivers shall collect and deliver users from. Not all users are able to walk by their own help with the vehicles. It is therefore necessary that the users are picked up as close to the entrance door as possible. Some users also have dementia and must be followed to/from a vehicle and their own home. - Medite Europe DACClonmelDeadline: Aug 18
RFT for the Provision of Shunting Services at Medite Europe DAC'26
Medite Europe DAC are seeking tender submissions from suitably qualified shunting companies for the provision of Shunting Services at their facility at Redmondstown, Clonmel, Co. Tipperary, E91V584. Details of the service we require are listed below: i) To provide suitable equipment, vehicles, labour and services on a 6 day a week basis to move packs of MDF from the Medite production site to different warehouse locations in the Clonmel, South of Ireland area. ii) To provide a sustainable solution to the tender offering. iii) The personnel provided to be employed as per the Safety Health + Welfare Work Act of 2005. The service provider having Duty of Care for these employees. iv) Delivery zones are within a 1km radius and 20km radius from the Medite production site. v) Additional delivery zones to be advised as and when required and prices on a pro-rata basis. vi) The personnel provided to be employed as per the Safety Health + Welfare Work Act of 2005. The service provider having Duty of Care for these employees. SPECIFICATIONS OF THE SERVICES REQUIRED (a) To provide a certified articulated tractor unit to carry the maximum 44mts allowable on the public roads this unit to be dedicated to the Medite DAC operations unless otherwise agreed. (b) To provide a sustainable option to Medite that will positively reduce the facilities’ carbon footprint under scope 3. Note Scope 3 definition “encompasses emissions that are not produced by the company itself, and not the result of activities from assets owned or controlled by them, but by those that it's indirectly responsible for, up and down its value chain. An example of this is when we buy, use, and dispose of products from suppliers”. (c) Regular Drivers fully certified CPC with a knowledge of Warehouse and Port Operations to be assigned to the Medite Europe DAC work. One nominated driver required at all times. (d) To provide a safe efficient shunter service on trailers with 24.00mts of MDF packs to the various warehouses located in and around the Clonmel and South Tipperary area. On rare occasions shunting may be required from Medite to SmartPly (Belview Port) within a 50km radius. (e) 2 x 13.3mt curtain sided Trailers with Headboards to be provided and dedicated to the Medite operation. The service provider is responsible for ensuring this equipment is in good order and available at all times. (f) Experienced labour to de- couple the truck tractor unit and re- couple the trailers truck unit. Labour to be on site at all times during shunting operations. An ability to provide replacement personnel in times of illness or vacations essential. (g) Appropriate Ratchet straps certified and in good order to be supplied and maintained. Experienced personnel to tie down the packs prior to shipping to the warehouses. (h) The service provider must be able to demonstrate the ability to provide backup equipment in case of damage or breakdown of the equipment. The average amount of 26mts per load of shunts to the warehouses amount to approx. 15 to 20 loads per day this will vary and will depend on production plans and market conditions. A total of approximately 3,500 to 4,500 loads/shunts per annum. The daily routines involve a mixture of loads on trailers depending on the needs of the business. Cooperation and flexibility are required on the part of the service providers and its personnel to match the production requirements with the demands of shipping and warehousing. From time-to-time work is required for a minimum of 4 hours on Sundays or Bank Holidays a rate for working during these periods should also be submitted with the tender. The mill closes for a minimum of 2 days over Christmas this varies from year to year. The closure period will be notified to the service provider at the end of the preceding October. Please see tender doc for full scope
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- No specific submission deadline is currently stated for this notice.
- Who is the contracting authority?
- The contracting authority is Teagasc - the Agriculture and Food Development Authority.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.