WHODjibouti
Training & Coaching of Regulatory Inspectors for WHO Good Manufacturing Practices on Sterile Pharmaceuticals
National regulatory authorities and ministries of health increasingly require inspectors who can assess sterile pharmaceutical products, vaccines, biotechnology products and other biologicals using a risk-based and evidence-led approach. Sterile manufacturing is a high-risk area because weaknesses in contamination control, aseptic process...
Angebotsfrist: 28. August 2026Typ: Ausschreibung
Berufliche Qualifizierung, Führungskräfteentwicklung, Seminare
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- WHO
- Veröffentlicht:
- 21. August 2026
- Frist:
- 28. August 2026
- Thema:
- Berufliche Qualifizierung
Ausschreibungsbeschreibung
Vollständige Beschreibung anzeigenBeschreibung einklappen
National regulatory authorities and ministries of health increasingly require inspectors who can assess sterile pharmaceutical products, vaccines, biotechnology products and other biologicals using a risk-based and evidence-led approach. Sterile manufacturing is a high-risk area because weaknesses in contamination control, aseptic processing, environmental monitoring, sterilization, utilities, data integrity, investigations or CAPA may have direct implications for patient safety and product quality. The underlying concept note recommends a staged, competency-based pathway consisting of self-paced online learning, instructor-led interactive core online course with substantial practical work, and three to six months of regular online mentored follow-up during which 5-working-day in-country training and coached mock inspection led by instructors in two targeted countries including Mongolia and Lao PDR. The course should be grounded primarily in WHO GMP main principles, WHO GMP for sterile pharmaceutical products, WHO GMP for biological products, WHO guidance on quality risk management, validation, water for pharmaceutical use, data integrity, inspection reporting, desk assessment, reliance and inspectorate quality management. The overall objective is to design, develop, deliver and evaluate a practical, competency-based WHO GMP Sterile Manufacturing Inspector Training Course that enables participating inspectors to contribute safely and effectively to supervised GMP inspections of sterile medicines and biological products, and to progress toward independent competence through post-course mentoring and documented practice. Instructions for Submission of Proposals: Submit proposals no later than 28 August 2026, 5:00 PM (UTC+8). Proposals should be submitted through the WHO e-Tendering Platform (In-Tend). If you experience technical difficulties uploading your proposal, please submit it to [email protected] Please quote “WPRO/DAF/SAO/SUP/P/0009482” in the subject line of all related correspondence.
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
3 Datenbereiche verfügbar
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Ähnliche Bekanntmachungen
10Training and Coaching of Regulatory Inspectors for WHO Good Manufacturing Practices on Sterile Pharmaceuticals
WHODjiboutiFrist: 28. Aug.National regulatory authorities and ministries of health increasingly require inspectors who can assess sterile pharmaceutical products, vaccines, biotechnology products and other biologicals using a risk-based and evidence-led approach. Sterile manufacturing is a high-risk area because weaknesses in contamination control, aseptic processing, environmental monitoring, sterilization, utilities, data integrity, investigations or CAPA may have direct implications for patient safety and product quality. The underlying concept note recommends a staged, competency-based pathway consisting of self-paced online learning, instructor-led interactive core online course with substantial practical work, and three to six months of regular online mentored follow-up during which 5-working-day in-country training and coached mock inspection led by instructors in two targeted countries including Mongolia and Lao PDR. The course should be grounded primarily in WHO GMP main principles, WHO GMP for sterile pharmaceutical products, WHO GMP for biological products, WHO guidance on quality risk management, validation, water for pharmaceutical use, data integrity, inspection reporting, desk assessment, reliance and inspectorate quality management.Hiring inspectors for Gasunie inspection of pressurized gas transport related equipment and pressure containing components
N.V. Nederlandse GasunieGroningenThe purpose of this tender is to select three applicants where Gasunie can hire inspectors who work for and on behalf of Gasunie. Gasunie itself has about twenty inspectors, and wants approximately 12 inspectors (almost six FTE) to accommodate a flexible workload. The inspectors shall, on behalf of Gasunie, perform inspection of pressurized gas transport related equipment and pressure containing components, mainly carbon steel. Inspections are done all over Europe, with emphasis on the Netherlands and Germany’s Ruhr district. Further inspections are mainly needed in northern Italy, Denmark and the United Kingdom. 12 persons - 6 FTERFQ for Supply & Delivery of Pharmaceutical Products for Gaza, oPt.
UNOPSSierra LeoneFrist: 04. Sept.This RFQ comprises 21 individual items which are presented under 5 categorisations based on therapeutic area, clinical risk profile and supply chain considerations. These categorisations are descriptive and are used for procurement, quality assurance, and risk-management purposes only; they do not constitute regulatory classifications. Bidders shall submit offers in accordance with the product descriptions, strengths, dosage forms, presentations, and quantities specified in this Schedule of Requirements. IMPORTANT NOTE: Interested vendors must respond to this tender using the UNOPS eSourcing system, via the UNGM portal. In order to access the full UNOPS tender details, request clarifications on the tender, and submit a vendor response to a tender using the system, vendors need to be registered as a UNOPS vendor at the UNGM portal and be logged into UNGM. For guidance on how to register on UNGM and submit responses to UNOPS tenders in the UNOPS eSourcing system, please refer to the user guide and other resources available at: https://esourcing.unops.org/#/Help/GuidesCall for External Collaborator – Update and operationalize risk assessment models for the SLI in Moldova
ILONepalFrist: 27. Aug.Dear Bidder, The International Labour Office (ILO) is looking for an individual to undertake work as an External Collaborator. Below is a summary of the work to be performed: The hired expert will work with Moldova’s State Labour Inspectorate (SLI) personnel to update risk assessment models, general and for undeclared work. Run updated model, generate profiles, and assist SLI to train territorial chiefs. Expert will co-design monitoring framework and provide guidance during pilot. Following which, expert will support required updates to models and use results to assist SLI to develop a risk assessment-based inspection plan for 2027. All learnings and practical guidance will be captured in a National Labour Inspection Risk Assessment Report. Building SLI focal person capacity over the contract period is a key requirement. If you are interested, please express interest and follow the instructions attached to consult the detailed terms of reference and other relevant information in the ILO e-sourcing platform. Please submit your proposal before the specified deadline. Thank you.Call for External Collaborator – Evaluation of the Hemayeh Electronic Labour Complaints Platform in Jordan, ILO Jordan
ILONepalFrist: 25. Aug.Dear Bidder, The International Labour Office (ILO) is looking for an individual to undertake work as an External Collaborator. Below is a summary of the work to be performed: The consultant will assess the effectiveness and accessibility of the Hemayeh Electronic Labour Complaints Platform in Jordan through a desk review, analysis of administrative data, and consultations with workers, employers, labour inspectors and civil society organizations. The assignment also includes examination of the platform's institutional arrangements and its interoperability with labour inspection, dispute resolution and worker-protection mechanisms, culminating in practical recommendations to strengthen the platform's performance, accessibility and long-term sustainability. Interested and qualified candidates are required to submit the following documents: - CV/resume - Proposal for the assignment that includes the methodology, workplan, and budget. - Two samples of past analytical work undertaken. If you are interested, please express interest and follow the instructions attached to consult the detailed terms of reference and other relevant information in the ILO e-sourcing platform. Please submit your proposal before the specified deadline. Thank you.Call for External Collaborator – Hiring a Consultant for development of a national pool of trainers on Carbon-Free Improved Cooking Stoves (ICS) in Bangladesh, ILO CO-Dhaka.
ILONepalFrist: 20. Aug.Dear Bidder, The International Labour Office (ILO) is looking for an individual to undertake work as an External Collaborator. Below is a summary of the work to be performed: I. Develop a detailed work plan and implementation methodology based on the consultancy objectives. II. Review relevant technical documents and develop a gender-responsive ToT package, including curricula, facilitator and participant learning materials, handbooks, quality assurance and occupational safety standards. III. Design a comprehensive five-day technology transfer programme with detailed session and lesson plans and practical exercises for the fabrication of carbon-free improved cooking stoves and submit it to the ILO for review and approval. IV. Deliver the five-day technology transfer and ToT programme, combining theoretical instruction with practical hands-on fabrication and installation sessions for improved cooking stoves. V. Assess participants' competencies using approved assessment criteria and recommend successful candidates for certification. VI. Facilitate a training session on marketing and promotion strategies VII. Prepare a sustainability and scale-up strategy outlining recommendations for institutionalizing the training programme, integrating it into TVET systems and identifying financing mechanisms for long-term implementation. VIII. Prepare and submit a comprehensive final with recommendations for future scale-up plan to the ILO. If you are interested, please express interest and follow the instructions attached to consult the detailed terms of reference and other relevant information in the ILO e-sourcing platform. Please submit your proposal before the specified deadline. Thank you.Development of a National Minerals Database
Deutsche Gesellschaft für Internationale Zusammenarbeit (GIZ) GmbHEschbornFrist: 31. Aug.Recognizing the complexity of implementing the NMDB, the SDMU project is searching for a service provider to implement a phased development of the NMDB using agile methodologies and aligning with GovStack framework. It is against this background that the SDMU project on behalf of Department of Geological Survey and Mines (DGSM), is seeking to procure consultancy services to develop, test and deploy the NMDB. This IT implementation is split into 3 phases: As an initial phase, a pilot of the NMDB shall be implemented to validate and de-risk the implementation of the NMDB. The aim of the pilot phase is to validate key assumptions, gather valuable early feedback from key stakeholders and establish a foundational understanding of the NMDB"s core functionalities. In the second phase (Option 1), after successful implementation and validation of a Minimum Viable Product, the extension of the pilot and implementation of a full set of capabilities of the NMDB is planned and implemented. Based on the success of the full-scale implementation the SDMU project is seeking further funding (top-up) to extend the functionality of the full scale solution (Option 2). The objective of the procurement is to define the target architecture based on the DGSM environment and to develop, deploy, and evaluate a pilot of the NMDB that complies with Uganda"s mining legal and regulatory framework for a Minimum Policy Compliant Product (MPCP). The fully functional pilot of the NMDB will demonstrate the core functionalities of the NMDB, validate user journeys, and facilitate early feedback from a limited set of users. The specific objectives for the pilot of the NMDB are: Develop of NMDB pilot: implement the core functionalities of the NMDB, that include mine site inspection and monitoring management and Chain of custody (CoC) modules. Design and technical architecture: Provide practical insights that will refine and finalise the overall system architecture and technology stack. AliContract for the provision of a combined High-Resolution Mass Spectrometer (HRMS) for metabolomic analysis equipped with Desorption Electrospray Ionisation (DESI) imaging capability, based on a Waters Xevo QTof/MRT platform with Desorption Electrospray Ionisation (DESI) XS with imaging capabilities.
University College CorkCork¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬¬University College Cork is seeking to procure: 1. A combined High-Resolution Mass Spectrometer (HRMS) for metabolomic analysis equipped with Desorption Electrospray Ionisation (DESI) imaging capability, based on a Waters Xevo QTof/MRT platform with Desorption Electrospray Ionisation (DESI) XS with imaging capabilities 2. A complementary triple quadrupole mass spectrometer (Waters Xevo TQ-S cronos/micro) for highly sensitive targeted quantitative metabolomics. This infrastructure is required to support a Mass Spectrometry Core Facility (MS-IMPACT) funded through the Higher Education Research Equipment Grant (HEREG). The combined platform will provide complementary capabilities spanning discovery metabolomics, structural characterisation, spatial molecular imaging, and targeted quantitative analysis. The HRMS with DESI will be used for biological, environmental, pharmaceutical, forensic, archaeological, geological and bioprocess research applications and analysis from simple and complex mixtures with the ability to simultaneously to identify known metabolites with high sensitivity, discover previously unknown molecular features, determine accurate molecular masses and elemental compositions, characterise peptides, intact proteins, glycans, and small molecules, spatially localise pharmaceuticals, metabolites and chemical entities within complex biological and non-biological samples, including microbial modifications. One of the key differentiators for the Xevo QTof/MRT platform over other instruments is the reduced sampling time which enables better consistency over the peak range – this is particularly important when sampling a surface but important in many applications. The infrastructure will support applications including: biopharmaceutical characterisation, intact protein mass analysis; peptide mapping, glycan and glycopeptide profiling, microbial fermentation studies, food and environmental metabolomics, natural product discovery, clinical biomarker discovery; pharmaceutical synthesis, process, metabolites and degradation products, forensic and contaminant analysis. A key requirement of this infrastructure is the ability to perform ambient, minimally destructive mass spectrometry imaging (MSI) ideally within one vendor integrated platform offering (hardware, software, support). The Xevo G3 QTof will be compatible for DESI XS imaging for routine comprehensive tissue imaging and for locating substrates on a range of materials. DESI enables direct analysis of compounds from surfaces under ambient conditions with little or no sample preparation, by generating charged microdroplets that extract and ionise molecules directly from the sample surface. Unlike matrix-assisted laser desorption ionisation (MALDI), DESI does not require matrix deposition, minimises chemical modification/ morphological changes in samples, reduces risk of analyte redistribution caused by matrix application; enables rapid analysis of heterogeneous samples; allows analysis under near-native conditions, facilitates analysis of diverse surfaces including tissues, microbial colonies, materials, chemical deposits, geological samples, paints/pigments and forensic samples including e.g. hair, nails , fingerprints, blood and explosive residues. DESI therefore provides a unique capability for a broad range of sample types. The DESI XS platform coupled to a high-resolution accurate mass instrument will enable: spatial metabolomics, microbial colony metabolite mapping, localisation of pharmaceutical compounds; analysis of fermentation processes; imaging of endogenous metabolites and investigation of biological and material interfaces. The imaging capability is a critical requirement of the infrastructure and represents a significant efficiency enhancement beyond conventional LC-MS analysis, allowing spatial characterisation in two dimensions. The HRMS is central to the UCC MS Core Facility and allows the simultaneous analysis of both known and ‘unknown’ compounds for high-resolution metabolomics capability to advance arrange of research programmes across the physical and life sciences. It therefore provides the required combination of sensitivity, accurate mass measurement, MS/MS capability and compatibility with DESI MS/MS imaging technology. The triple quadrupole mass spectrometer will be used in a complementary approach to the HRMS focused on targeted known metabolites across a range of food, nutrition and life science applications. While HRMS provides discovery and structural information, triple quadrupole mass spectrometry remains the benchmark technique for quantitative metabolomics, targeted biomarker validation, pharmacokinetic studies, low abundance metabolite detection; outine analytical workflows. The Xevo TQ-S cronos/micro platform provides, multiple reaction monitoring (MRM) provides high sensitivity, excellent quantitative precision high sample throughput. Applications include, but is not limited to, analysis of a range of fat- and water-soluble vitamins (as status biomarkers for population nutritional status surveillance), nucleotide sugars, amino acids, lipid mediators, microbial metabolites, pharmaceutical compounds and clinical biomarkers.The establishment of 8 multi-party framework agreements for the delivery of training services: Category 3 and Category 4
Engineering SkillnetDublinFrist: 16. Sept.This competition relates to the establishment of two multi-party framework agreements: Category 3 - Operational Excellence and Leadership and: Category 4 - Regulation, Standards and Risk Management. Wide ranging training is required and divided into the following Categories as outlined above. • Category No 3: Operational Excellence and Leadership • Category No. 4: Regulation, Standards and Risk Management The frameworks will be used for technical up-skilling and transversal development of adult learners working in industry to include certified pathways (QQI and NFQ – all levels) and uncertified/bespoke training such as but not limited to hands-on workshops, blended/modular programmes, and Work-Based Learning. Training can take place at various locations nationwide in person or online Provision of training aims to develop a highly skilled workforce for green and digital transitions across manufacturing, fabrication, civil infrastructure, and heavy engineering sectors included but not limited to the following: • Agricultural and Marine, • Automotive, Aerospace and Defence, • Engineering and Building services, • Energy and Environment, • Industrial Automation, • Materials handling, • Metal fabrication and Processing, • Packaging, Paper and Print • Precision Engineering There is no guarantee of additional contracts, but where they arise, the Contracting Authority will consult the members of the framework agreement in accordance with the rules of operation outlined in this Request for Tender.The Provision of Clinical Simulation and Integrated Assessment Equipment for Healthcare and Veterinary Education at Cork Education and Training Board - Cork College of FET
Cork Education and Training BoardCorkFrist: 03. Sept.Cork College of FET requires a coordinated suite of healthcare and veterinary simulation and assessment equipment to support a distributed clinical simulation and integrated assessment network across Morrison’s Island Campus, Mallow Campus, Kinsale Campus, West Cork Campus, Macroom FET and Youghal FET. The network will support healthcare education, nursing pathways, pre-paramedic studies, healthcare assistant training, Skills to Advance provision, employer upskilling, continuing professional development and future micro-qualifications. The requirement is to enable central specialist teaching, local practical skills development, local recorded assessment and central verification/quality assurance through compatible simulation, AV, digital capture and learning management technologies. The requirement is that simulation operation can occur locally or remotely from another location within the network and AV digital capture can also be operated for one location directly from another. The successful tenderer (s) shall provide all equipment, software, licences, accessories, installation materials, configuration services, testing, training, documentation, warranty, support and maintenance required to deliver a fully operational solution. Training for educators and full training and support for the upskilling of a Sim Technician is a key requirement The solution must be suitable for use in an education and training environment and must support simulation-based teaching, clinical skills practice, hybrid delivery, recorded competency assessment and central quality assurance. Clinical Simulation Equipment for Veterinary Nursing is required for Douglas Street Campus Eircode T12DW32.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 28. August 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist WHO.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.