Inland Fisheries IrelandDublinTED
Supply and delivery of 4x4 HVO-ready Vehicles for Inland Fisheries Ireland in two Lots
Inland Fisheries Ireland requires the service of a competent Contractor for the Supply and delivery of HVO-ready 4x4 Vehicles. The vehicles must be diesel-compatible and capable of operating on Hydrotreated Vegetable Oil (HVO) as a direct drop-in fuel without requiring any engine modification. Tenderers are required to provide details of ...
Angebotsfrist: 31. August 2026Typ: Ausschreibung
Fahrzeuge
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
Inland Fisheries Ireland requires the service of a competent Contractor for the Supply and delivery of HVO-ready 4x4 Vehicles. The vehicles must be diesel-compatible and capable of operating on Hydrotreated Vegetable Oil (HVO) as a direct drop-in fuel without requiring any engine modification. Tenderers are required to provide details ...
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Inland Fisheries Ireland
- Veröffentlicht:
- 28. Juli 2026
- Frist:
- 31. August 2026
- Thema:
- Fahrzeuge
Ausschreibungsbeschreibung
Inland Fisheries Ireland requires the service of a competent Contractor for the Supply and delivery of HVO-ready 4x4 Vehicles. The vehicles must be diesel-compatible and capable of operating on Hydrotreated Vegetable Oil (HVO) as a direct drop-in fuel without requiring any engine modification. Tenderers are required to provide details of manufacturer approvals for the use of paraffinic fuel including Hydrotreated Vegetable Oil (HVO).
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
10- Finance Directorate - Queen's University BelfastBelfastFrist: 11. Juli
CFT 260003 Supply, Delivery (unloaded and positioned at the point of use), Installation, Commissioning, Training, Warranty and Maintenance of a GC\MS System for Analysis of Evolved Gases and Combustion Products from Solid Fuels
The School of Chemistry and Chemical Engineering requires the procurement of a Gas Chromatography–Mass Spectrometry (GC/MS) system to support the analysis of volatile and semi-volatile compounds generated from the thermal decomposition and combustion of solid fuels and related materials. The system will form part of an integrated analytical capability under the PEACEPLUS Clean Air project, supporting research, method development, and future accredited testing activity. The primary function of the GC/MS system is to enable qualitative and quantitative analysis of evolved gases and combustion products, including volatile organic compounds, oxygenated species, and other trace emissions relevant to air quality and fuel characterisation. The system must be capable of operating as a standalone analytical platform and must also be compatible with a separately procured thermogravimetric analysis (TGA) system for evolved gas analysis workflows. The specification therefore includes requirements for interfacing, gas transfer, and handling of low-concentration, transient species. - Finance Directorate - Queen's University BelfastBelfastFrist: 12. Aug.
CFT - 260187 Supply, Delivery (unloaded and positioned at the point of use), Installation, Commissioning, Training, Warranty and Maintenance of a GC\MS System for Analysis of Evolved Gases and Combustion Products from Solid Fuels - PEACEPLUS Funded
The School of Chemistry and Chemical Engineering requires the procurement of a Gas Chromatography–Mass Spectrometry (GC/MS) system to support the analysis of volatile and semi-volatile compounds generated from the thermal decomposition and combustion of solid fuels and related materials. The system will form part of an integrated analytical capability under the PEACEPLUS Clean Air project, supporting research, method development, and future accredited testing activity. The primary function of the GC/MS system is to enable qualitative and quantitative analysis of evolved gases and combustion products, including volatile organic compounds, oxygenated species, and other trace emissions relevant to air quality and fuel characterisation. The system must be capable of operating as a standalone analytical platform and must also be compatible with a separately procured thermogravimetric analysis (TGA) system for evolved gas analysis workflows. The specification therefore includes requirements for interfacing, gas transfer, and handling of low-concentration, transient species. - Ørsted Wind Power A/SFredericia
Lot Tender for Supply, Delivery, Installation and Operation of a Vessel Monitoring System
Ørsted is tendering for a new Vessel Monitoring System (VMS) based service to document the performance of its fleet of Crew Transfer Vessels (CTV’s) operating in wind farms in Europe, Asia and US. 2.2.5 The solution should provide Ørsted with: a) A log of the daily activities of the CTV fleet using onboard logger boxes. Daily activities could be Transit, Dockings with transfers and crane lifts, etc. b) Give the captain access to make comments throughout the shift. c) Video record the transfer area on the vessel while docking and provide access to these re-cordings. d) Analyse the vessel speed, comfort, and dockings. e) Analyse both the transfer quality and the impact on the WTG when the CTVs are docking. f) Collect and analyse engine data. g) Deliver the collected and analysed data to Ørsted daily. h) Provide excellent and fast service and support when needed. i) The Scope of Services will be compromised of Services as well as Goods/Hardware. j) Fast and flexible supply, installation and commissioning to avoid interruption with offshore operations - Public Contracts Review BoardLuqa
MTIP/2026/Q003 - FRAMEWORK CONTRACT FOR SUPPLY AND DELIVERY OF VEHICLE STARTER BATTERIES TO THE PUBLIC WORKS DEPARTMENT 2026 -2028
The purpose of this Call for Quotation (CfQ) is a framework contract for the supply and delivery of vehicles’ starter batteries on an “if and when required” basis, to the Public Works Department (PWD). - An Post_391Dublin 1
Supply of Forecourt Purchase (Fuel) Card and Associated Services
The Successful Tenderer will be required to provide AN POST with purchase (fuel) cards which permits the purchase of products and services on service station forecourts throughout the Republic of Ireland. The Services should be available 7 days a week, 365 days a year and ideally would like 24-hour coverage but accept this is not always possible in remote locations. The purchase (fuel) card should enable AN POST to purchase the following products/services but is not limited to • Automotive Ultra Low Sulphur Diesel Fuel • Hydrotreated Vegetable Oil (HVO) Class II • Other fuel alternatives that may be required during the term of a Contract • Electrical Charging • Vehicle Washing Facilities • Lubricants • AdBlue • Screen Wash The above list may change depending on operational requirements. The Services associate with the supply of the cards must include the management and co-ordination of the purchase card services and provide access to an online management information system where data on purchases can be accessed and/or reports can be created. The Successful Tenderer must be able to provide a solution that enables card use restrictions / controls that enables the purchase of certain products/services and if required, set spending limits, enable PIN security, enable mileage tracking, anti-fraud measures. The Successful Tenderer is responsible to ensure that a network of available service stations is maintained throughout the term of this contract “Coverage”. The Services must be provided in accordance with good industry practice and comply with all relevant and applicable laws and licensing requirements. Applicants will be expected to demonstrate to AN POST’s complete satisfaction that they have the capacity and capability to provide all of the services required. The requirements contained in this notice are based on AN POST’S current requirements which are indicative only, are not exhaustive and are subject to change in line with the business needs and ongoing operational requirements of AN POST. Please see accompanying Pre-Qualification Questionnaire. - Cork County CouncilCorkFrist: 31. Juli
Establishment of an approved Shortlist for the design, supply, installation, operation and maintenance of Public Residential, Destination Electric Vehicle Chargers for Cork and Kerry County Councils
This procurement is to establish a Shortlist of competent Contractors for the design, supply, installation, commissioning, certification, operation and maintenance of public EV charging units for Cork County Council and Kerry County Councils' Pilot Electric Vehicle Charging Point Scheme. These Charging Points which will be installed in public accessible locations (5no. locations are currently proposed). It is the Contracting Authorities intention to enter into a Shortlist Agreement with Shortlist Members in a Multi-Party Shortlist for Design, Supply, Installation, Commissioning, Certification and Subsequent Operation and Maintenance of Electric Vehicle Chargers and associated infrastructure under the Department of Transport’s Regional and Local EV Charging Network Plan. This plan is being implemented by Zero Emission Vehicles Ireland (ZEVI) section of the Department of Transport and Local Authorities. The country has been divided up into regions for this implementation. Cork County Council and Kerry County Council areas form Region 6. Cork County Council is the lead authority for Region 6 and is managing this procurement. The supply and associated works and services for installation and commissioning will be funded through the Department of Transport – ZEVI. This is the first stage of this competitive procedure whereby any interested party may submit a response to the Request for Tender in order to be considered for inclusion on the next stage. Following evaluation, the top five (5) scoring applicants will be invited to tender at stage 2, should that number qualify. Charge Point Operators that are awarded contracts from the Shortlist will be required to enter separate contractual agreements with each Contracting Authority. - Construction and Procurement DeliveryBelfastFrist: 19. Juli
ID 6396032 - AFBI – Supply, Delivery, Installation and Commissioning of an Imaging Flow-Cytometry System for Automated Shipboard Phytoplankton Analysis to Support the SEUPB PEACEPLUS-Funded ACCLIMATISE Project
The Agri‑Food and Biosciences Institute (AFBI) is one of the world’s leading providers of scientific research and evidence-based services to government, non-governmental, and commercial organisations. With a unique breadth of facilities and multidisciplinary scientific capability spanning agriculture, animal health, food, the environment, biosciences, and economics, AFBI undertakes a wide range of impactful research projects for both the public and private sectors.Funding has been secured through the Special EU Programmes Body (SEUPB) administered PEACEPLUS scheme to deliver the ACCLIMATISE project, an all-island initiative aimed at developing an integrated marine climate change monitoring and assessment toolbox for the island of Ireland. As part of this programme, AFBI is seeking to procure next‑generation observational technologies capable of monitoring and quantifying changes in plankton communities and associated marine food webs within the Irish Sea. The Fisheries and Aquatic Ecosystems Branch (FAEB) of AFBI requires the procurement of one flow cytometry-based plankton imaging system capable of high resolution imaging, optical triggering, and automated morphological analysis of marine plankton and suspended particulates. Suppliers should refer to the Specification for further information on the requirements. - Medite Europe DACClonmelFrist: 26. Juni
PQQ for the Design, Supply, Installation and Commissioning of a Flue Gas Abatement System at Medite Europe DAC
MEDITE Europe DAC is invites expressions of interest from experienced and qualified companies for the design, supply, installation and commissioning of a flue gas abatement system and associated ancillaries for a biomass boiler installation. A system will be required to treat the boiler flue gas stream and reduce particulate emissions in order to support safe, reliable and compliant plant operation. The proposed solution shall be suitable for the defined operating conditions, including flue gas flow, temperature, moisture content and dust loading, and shall be capable of integration with the existing boiler, draft system, stack and plant control infrastructure. The scope is expected to include, as applicable, the main abatement equipment, inlet and outlet ductwork interfaces, support steelwork, access platforms, insulation, ash collection and discharge arrangements, instrumentation, controls, electrical integration, and all associated ancillaries necessary for a complete and operable system. The system should be designed to achieve the required emissions performance while maintaining acceptable pressure drop, operability, maintainability and safe access for inspection and maintenance. The proposed equipment must be of proven industrial technology and conform to best practice design principles and all relevant European legislation and standards, including CE marking where applicable. The successful contractor shall be expected to undertake detailed engineering, equipment manufacture and supply, delivery to site, erection, testing, commissioning, performance verification, operator training and handover of the complete system, together with the provision of all relevant drawings, manuals and technical documentation. It is anticipated that this pre-qualification process will be followed by technical proposal evaluation and a subsequent detailed tendering stage for the selected bidders. - Finance Directorate - Queen's University BelfastBelfastFrist: 11. Juli
CFT 260004 Supply, Delivery, Training, and Commissioning of Two Micro-AUV Systems for Marine Habitat Mapping, PeacePLUS funded
The MOSAIC project, funded under SEUPB’s PeacePLUS programme, requires advanced autonomous survey capability to support habitat association modelling, seabed mapping, and conservation planning for OSPAR-listed elasmobranchs around the Northern Ireland and Donegal coastline. To meet these scientific and operational objectives, Queen’s University Belfast seeks to procure two micro Autonomous Underwater Vehicle (AUV) systems capable of delivering high-resolution side scan sonar (SSS) imagery and georeferenced photogrammetric datasets. Traditional survey methods using divers, ROVs, or towed systems are limited by weather dependency, risk, cost, and lack of repeatability. Micro AUVs overcome these limitations by providing safe, autonomous, repeatable, and cost efficient surveys at 30–300 m depth. Two complementary AUV platforms are required: one dedicated to side scan sonar mapping of benthic habitats, and one equipped for photogrammetry to capture detailed seabed imagery for egg case detection, microhabitat annotation, and ground truthing of predictive models. - Ungheni District CouncilUngheniFrist: 14. Sept.
Supply of a dental ambulance (medical vehicle for dental services)
1 Dental ambulance (medical vehicle for dental services) intended for dental services, without a dental unit, but with a planned area for its installation, with the following description: Dimensions and key specifications: • Length (L3): Approximately 5,998 mm total length, with a wheelbase of 4,035 mm • Height (H2): Approximately 2,524 mm total height • Cargo area size: Approximately 3.7 meters in length and 1.9 meters in height • Volume: Approximately 13–15 m³ • Engine: 2.2 liter BlueHDi diesel (Euro 6), typically 140 HP (103 kW) or 180 HP (132 kW) • Drive: 4x2, Front Wheel Drive (FWD) • Transmission: Manual/automatic Key Features (common to recent models): • Safety and comfort: ABS, ESP, driver airbag, manual air conditioning, Bluetooth, and cruise control • Cargo area: Right side sliding door, rear doors with 270 degree opening, and protective plate • Maximum Authorized Total Weight: < 3500 kg (Category B) Interior Structure: • Thermal and sound insulation • Washable medical grade wall panels • Medical non slip flooring • Lightweight fixed medical furniture • Electrical supply system • Independent electrical system • Inverter min. 2000 W • 220V outlets (min. 4) • Medical LED lighting (min. 500 lux) • External electrical network connection Water System • Stainless steel sink • Clean water tank ≥ 80 L • Waste water tank ≥ 80 L • Electric hot water boiler (10 liter capacity) Medical Equipment • Examination lamp • Medical work table • Instrument sterilization area • Storage cabinets for instruments Ventilation System • Air conditioning for the medical compartment • Independent stationary heating system Safety • Fire extinguisher • Special medical vehicle approval • CE conformity certificate • Warranty: 100,000 km or 2 years Internal identifier: All technical specifications shall be considered to include the mention "or equivalent."
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 31. August 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Inland Fisheries Ireland.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.