Ministry of energy ,mining and mineral resources- Bureau of MetrologySkopjeTED
Procurement of an Automated Analyzer for Determining Ignition Delay and Derived Cetane Number (DCN) of Middle Distillate Fuels Using a Constant-Volume Combustion Chamber Method
Procurement of an Automated Analyzer for Determining Ignition Delay and Derived Cetane Number (DCN) of Middle Distillate Fuels Using a Constant-Volume Combustion Chamber Method
Angebotsfrist: 16. Juli 2026 (abgelaufen)Typ: Ausschreibung
Laborinstrumente
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Ministry of energy ,mining and mineral resources- Bureau of Metrology
- Veröffentlicht:
- 16. Juni 2026
- Frist:
- 16. Juli 2026
- Thema:
- Laborinstrumente
Ausschreibungsbeschreibung
Procurement of an Automated Analyzer for Determining Ignition Delay and Derived Cetane Number (DCN) of Middle Distillate Fuels Using a Constant-Volume Combustion Chamber Method
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
6 Datenbereiche verfügbar
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Unterlagen
Freischalten49 Angaben erfasstUnterlagen
Auftraggeber
Freischalten3 Angaben erfasstAuftraggeber · Anschrift · Kontakt
Lose
Freischalten1 Angabe erfasstLose LOT-0001
Verfahrensdaten
Freischalten5 Angaben erfasstBekanntmachungsnummer · Verfahrensreferenz · Verfahrensart · Auftragsart · +1 weitere
Ausführungsorte
Freischalten3 Angaben erfasstAusführungsorte
Veröffentlichungsstelle
Freischalten6 Angaben erfasstVeröffentlichungsstelle · Anschrift · Kontakt
Ähnliche Bekanntmachungen
5CFT 260003 Supply, Delivery (unloaded and positioned at the point of use), Installation, Commissioning, Training, Warranty and Maintenance of a GC\MS System for Analysis of Evolved Gases and Combustion Products from Solid Fuels
Finance Directorate - Queen's University BelfastBelfastFrist: 11. JuliThe School of Chemistry and Chemical Engineering requires the procurement of a Gas Chromatography–Mass Spectrometry (GC/MS) system to support the analysis of volatile and semi-volatile compounds generated from the thermal decomposition and combustion of solid fuels and related materials. The system will form part of an integrated analytical capability under the PEACEPLUS Clean Air project, supporting research, method development, and future accredited testing activity. The primary function of the GC/MS system is to enable qualitative and quantitative analysis of evolved gases and combustion products, including volatile organic compounds, oxygenated species, and other trace emissions relevant to air quality and fuel characterisation. The system must be capable of operating as a standalone analytical platform and must also be compatible with a separately procured thermogravimetric analysis (TGA) system for evolved gas analysis workflows. The specification therefore includes requirements for interfacing, gas transfer, and handling of low-concentration, transient species.CFT - 260187 Supply, Delivery (unloaded and positioned at the point of use), Installation, Commissioning, Training, Warranty and Maintenance of a GC\MS System for Analysis of Evolved Gases and Combustion Products from Solid Fuels - PEACEPLUS Funded
Finance Directorate - Queen's University BelfastBelfastFrist: 12. Aug.The School of Chemistry and Chemical Engineering requires the procurement of a Gas Chromatography–Mass Spectrometry (GC/MS) system to support the analysis of volatile and semi-volatile compounds generated from the thermal decomposition and combustion of solid fuels and related materials. The system will form part of an integrated analytical capability under the PEACEPLUS Clean Air project, supporting research, method development, and future accredited testing activity. The primary function of the GC/MS system is to enable qualitative and quantitative analysis of evolved gases and combustion products, including volatile organic compounds, oxygenated species, and other trace emissions relevant to air quality and fuel characterisation. The system must be capable of operating as a standalone analytical platform and must also be compatible with a separately procured thermogravimetric analysis (TGA) system for evolved gas analysis workflows. The specification therefore includes requirements for interfacing, gas transfer, and handling of low-concentration, transient species.ZAL (Hamburg): Test bench consisting of a climate and altitude chamber to operate hydrogen powered fuel cell systems at the Hanseatic Hydrogen Center for Aviation and Maritime (H2AM)
ZAL Zentrum für Angewandte Luftfahrtforschung GmbHThe following requirements apply to the test bench needed to operate hydrogen-powered fuel cell systems at ZAL: -The size of the expected test objects will be minimum 4 m x 1 m x 1.5 m (L x W x H). The test bench shall therefore consist of a climate and altitude chamber, the necessary aggregates to operate the fuel cell system and a ready-to-use operators user interface. -The climate and altitude chamber shall be able to simulate temperature, pressure and humidity according to International Standard Atmosphere (ISA) with a rate of change equivalent to 2.800 ft/min. -Aggregates to operate the fuel cell system shall include but are not limited to a balance of plant power supply, an electric load, a hydrogen supply system, a cooling system and an air system for the supply of the fuel cell systems cathode path. -All operational parts shall be controlled via a ready-to-use semi-automated central control system which allows the customer to run scripted test procedures as well as to use single operating points. -All legal and regulatory requirements for an operation in Europe, Germany and the city of Hamburg must be applied. -ZAL already operates supply infrastructures for hydrogen, process air, power supply etc., which will be extended to supply the test bench. The extension of the supply infrastructure is not part of this tender. Further information can be found in the procurement documents that will be issued after the conclusion of the participation competition.Disinfectants, detergents and other consumables for the functioning of Single and Double-Chamber Automated Endoscope Preprocessors (AER) in place at St Vincent's University Hospital (SVUH)
St. Vincent's University HospitalDublinSt Vincent's University Hospital (SVUH) owns and operates a number of Single and Double-Chamber Automated Endoscope Preprocessors (AER), such as WD440-PT among others. The AERs have been supplied under framework agreements (FA) and dynamic purchasing systems (DPS) managed by the Health Service Executive (HSE), namely and most recently HSE ref. 20288 for the "Supply and Installation of Endoscopic Decontamination Equipment and its Support and Maintenance". Apart from hardware and continuous comprehensive maintenance, which are provided under the call-off agreements mentioned above, SVUH requires in addition a series of consumables for the full functioning of the systems. These products (process chemicals i.e. detergent combined with peracetic acid or glutaraldehyde, bacterial filters and other items) are not available under the arrangements specified earlier. At the same time, essential technical compatibility requirements and integrated safety systems require the user to source consumables from the exclusive providers of these items, i.e. Wassenburg Ireland Ltd, Wassenburg Ltd or Wassenburg Medical B.V, who manufacture and directly supply them.Supply, Installation and maintenance of a PEM Electrolyser for Hydrogen Production at JRC Ispra
European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsFrist: 25. JuliThe procurement entails the design, manufacturing, delivery, installation, and commissioning of a Proton Exchange Membrane (PEM) electrolysis system for hydrogen production at the JRC Ispra site. The core of the system is a 50 Nm3/h electrolyser (which must be upgradable to 100 Nm3/h) that delivers hydrogen at an outlet pressure of 30 barg. The main equipment will be delivered in a containerized/skid version divided into three specific areas: a control panel area with the AC/DC converter, a water purification unit, and an ATEX-classified area containing the stacks and gas purification treatment. In addition to the containerized unit, the scope of supply includes several external components: - An MV/LV transformer - A thermal management system (dry cooler) - A low-pressure hydrogen storage system consisting of a cylinder rack at 30 bar with a total volume of 5 m3 - A gas blender installed on the outlet piping after the storage Finally, the procurement includes a comprehensive service package covering the Factory Acceptance Test (FAT), Site Acceptance Test (SAT), ATEX verification, staff training, two years of spare parts, and a 3-year maintenance contract. Reason for Purchasing The primary objective of this procurement is to produce green hydrogen by harnessing the renewable energy generated from the JRC Ispra site's internal photovoltaic (PV) plant. Currently, the site has a 1.35 MWp PV installation, which is planned to be expanded to 2 MWp and eventually 3 MWp in the future. Instead of using battery systems, the JRC intends to use the excess energy from this PV plant to power the electrolyser for self-consumption. The hydrogen produced will then be blended into the natural gas pipeline (up to a 10% volume blend) to feed the site's co-generators. A dedicated technical sizing analysis concluded that a modular 2x250 kW electrolyser is the optimal choice, as it offers the best compromise between the available PV power, the number of operating hours, and the demand from
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 16. Juli 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Ministry of energy ,mining and mineral resources- Bureau of Metrology.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.