Teagasc - the Agriculture and Food Development AuthorityCarlowTED
Microwave Drying System
This competition is for the purchase of a Microwave Drying System The unit must be operable by one person and must allow for effective drying of a range of marine biomass and food products
Typ: Ausschreibung
Verfahrenstechnik
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Teagasc - the Agriculture and Food Development Authority
- Veröffentlicht:
- 23. Juli 2026
- Frist:
- Nicht angegeben
- Thema:
- Verfahrenstechnik
Ausschreibungsbeschreibung
This competition is for the purchase of a Microwave Drying System The unit must be operable by one person and must allow for effective drying of a range of marine biomass and food products
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
7 Datenbereiche verfügbar
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Unterlagen
Freischalten50 Angaben erfasstUnterlagen · Dokumentenpaket
Auftraggeber
Freischalten3 Angaben erfasstAuftraggeber · Anschrift · Kontakt
Lose
Freischalten1 Angabe erfasstLose LOT-0001
Verfahrensdaten
Freischalten5 Angaben erfasstBekanntmachungsnummer · Verfahrensreferenz · Verfahrensart · Auftragsart · +1 weitere
Ausführungsorte
Freischalten3 Angaben erfasstAusführungsorte
Bieter und Auftragnehmer
Freischalten3 Angaben erfasstBieter und Auftragnehmer · Anschrift · Kontakt
Veröffentlichungsstelle
Freischalten3 Angaben erfasstVeröffentlichungsstelle · Anschrift · Kontakt
Ähnliche Bekanntmachungen
9Upgrade SAXS System
Institute of Science and Technology Austria (ISTA)KlosterneuburgUpgrade of a small angle X-ray scattering (SAXS) with Metal Jet source and a wide-angle detector - The first upgrade is installation of additional, stronger (higher flux) source in order to allow for high resolution small-angle measurements, in order to elucidate unambiguously determine structure of nanoparticle assemblies. The second upgrade is with additional wide-angle X-ray scattering (WAXS) detector in order to allow, in combination with current detector, for simultaneous measurement of short-range (atomic level) and long-range order.Internet Services Long Term Agreements Fiber, microwave and Satellite Connectivity
FAONigerFrist: 30. Aug.The Food and Agriculture Organization of the United Nations (FAO) invites you to submit an offer for the procurement of Internet Services (Fiber, microwave, and Satellite Connectivity ) to be delivered to Jordan . If you are interested in submitting an offer, please make sure to have, at least, a UNGM Basic Registration with FAO (www.ungm.org). Instructions on how to access FAO tender documents through UNGM are attached to the present Notice under the “DOCUMENTS” tab; please follow these instructions when submitting your bid. OFFERS WILL ONLY BE ACCEPTED IF SUBMITTED THROUGH THE UNGM PORTAL. OFFERS NOT SUBMITTED THROUGH THE UNGM PORTAL WILL BE INVALIDATED. Many thanks and best regards, FAO PROCUREMENT SERVICEPrecise local milling & polishing System (IMWS-07.1) - PR1068383-2690-P
Fraunhofer-Gesellschaft - Einkauf B12München1 Piece - Precise local milling & polishing System (IMWS-07.1) The Fraunhofer Institute for Microstructure of Materials and Systems IMWS researches the application behaviour, reliability, safety and lifetime of innovative materials in components and systems. The Business Unit "Electronic Materials and Components" Fraunhofer IMWS support industry and research partners by its internationally recognized expertise in failure analyses of electronic components. Fraunhofer IMWS will enhance its capabilities for advanced failure analysis and material characterization to support the ramp up of new heterogenous integration technologies addressing the manufacturing and reliability challenges. To eneable a precise mechanical preparation procedure a specialized depackaging tool is proposed. The system must be a precision grinding 5 axis CNC machine for mechanical preparation of microelectronic devices. The CNC system must be built up as and orthogonal XYZ system with the sample to prepare fixed in in XY-orientation and two additional tilt mechanisms for X- and Y-axis. To estimate the residual thickness of the milled substrate (i.e. Silicon) a second tool for measuring through the substrate is needed. This can be done optically. Because Silicon is only transparent in visible spectrum at a thickness of smaller than 1µm, an optical thickness measuring instrument in the wavelength of Infrared range and in visible range is neccessary. Options: 1.1.9. General Device Specifications Optional, the systems has to be equipped with an optical non contact measurement system to evaluate the sample orientation by three point alignment in vertical direction and a tilt compensation in both X- and Y-axis so the sample is perfectly perpendicularly oriented to the milling spindle. 1.1.11. General Device Specifications Optional: an additional sample holder must be offered 1.3.4. Spindle Specifications Optional: pneumatic or electric tool changer for fast and toolless change of milling or polishing consumables 1.5.2. Live sample control optional: additonal cameras for live inspection of milling progress 1.8.1. System for collection of dust and particles during milling process "For removal of dust and particles during dry milling processes an vacuum dust collecting system must be offered. It has to be equipped with a HEPA filter system at least of class H13. The system must operate at 230V / 50Hz." 1.8.2. System for collection of dust and particles during milling process For removal of used slurry a recirculating system for supply with fresh water or milling liquid at the milling site must be offered.Supply and Installation of the Personal Microwave Security Scanners
European Union Agency for the Space ProgrammePragueFrist: 14. Sept.The scope of the framework contract to be signed as a result of this procurement is the supply and installation of personal microwave security scanners. Security scanners are aimed to be used in a data centre environment and as such should contribute to prevent attacks such as sabotage and data theft.Photocathode Laser System
Helmholtz-Zentrum Dresden-Rossendorf e.V.DresdenHelmholtz-Zentrum Dresden-Rossendorf (HZDR) has been working on the development of a superconducting electron source (SRF gun) for about 20 years. An integral part of this electron source is a photocathode laser which, in combination with a photocathode, uses the external photoelectric effect to generate electron pulses. These pulses are then accelerated by the electric field of the superconducting RF resonator. The required laser wavelength for this purpose is about 260 nm, while the aimed pulse energy at this wavelength is 5 μJ. Detailed requirements in the table below (2. Performance quote) are specified separately for the fundamental wavelength in infrared (IR) and the 4th harmonic in ultraviolet (UV). Pulse repetition rate shall be flexible and reach 2 MHz. The average power in UV has to reach at least 1 W. Laser pulse duration is a key optimization parameter that needs to be variable in the range of 0.3-10 ps FWHM. Moreover, the temporal (longitudinal) profile of the laser pulse overall is important for properties of the generated electron pulse and thus also needs to be adjustable. For this, a spatial light modulator for modifying the spectrum needs to be integrated in the offered system. It is desirable that the manufacturer finds settings of the spectral shaper that result in a flat-top temporal shape of the UV pulse. Given that the temporal shape of a chirped pulse is critical in the planned application, spectral smoothness, stability and absence of long wings or shoulders are of high importance. Spectrum distortions caused by nonlinear effects shall be insignificant even at the maximum required pulse energy. Ability to synchronize the oscillators' repetition rate to a radio-frequency (RF) reference signal is necessary. Achievable integrated time jitter in the range between 10 Hz and 1 MHz of the laser with respect to the reference shall not exceed 100 fs. However, synchronization electronics are not part of the current tender and will be obtained from another source. The oscillator needs to be prepared for repetition rate locking, i.e. contain a short-range and a long-range actuators for fine adjustment of the cavity length. Another aspect of synchronization is the ability to control the repetition rate and the emission time of the laser by an external trigger signal. This ability needs to be available. Reliability and permanent availability (24/7) are of particular importance. The system will be located in an optical laboratory with ±1°C temperature stability. Beside the fulfilment of the criteria described in annex 01A, the scope of deliveries and services includes, that means are to be offered in the quotation: • Factory Acceptance Test (FAT), with proof of fulfilment of the performance requirements • Delivery according to DDP (Incoterms 2010) to the place of usage • Installation und commissioning including On-Site Acceptance Test (OSAT), with proof of fulfilment of the performance requirements • 12 months warranty from OSAT • CE marking • complete manual in English • suitable "water-to-water chiller"A mobile Cleaning In Place (CIP) system and a centralized pH system
Danmarks Tekniske Universitet - DTUKgs. LyngbyThis tender relates to the purchase of a mobile Cleaning In Place (CIP) system and a centralized pH System for the demonstrator-scale acetone production plant, representing the primary outcome of the PYROCO2 project. The PYROCO2 project is a prestigious European Innovation Action type project, funded in 2021 under EU's first round of calls for proposals in support of the European Green Deal. The project has twenty partners from eleven countries, including DTU and process engineering partner Bioprocess Technology SL (BPT, Spain), as well as SINTEF AS (SINTEF, Norway) as the PYROCO2 project coordinator. Any questions regarding the tender might include consultations with other partners than DTU. The main goal of the project is to demonstrate at scale the biotechnological production of acetone by using hydrogen and carbon dioxide gasses as main feedstocks. The main deliverable of the project is the construction and operation of a demonstrator-scale chemical production facility at Herøya Industrial Park, Porsgrunn, Norway, and demonstration of industrial CO2-based acetone production at TRL7 with an annual production capacity of approx. 300 tons. For more information about the PYROCO2 project, please visit www.pyroco2.eu/.Tender for Utensil Washer/Drying Tunnel, Dough Cutter/Divider, Large Quiche/Pastry Shell Press, Labelling Equipment , UV Sanitisation Unit and X-Ray Unit for Food Manufacturing Company
Zanna Cookhouse LimitedClonard RoadFrist: 18. Aug.Tender for supply and installation of 6 lots of equipment for food manufacturing plant. These items of equipment must meet all EU Standards and must provide a very high and expedient level of service to minimise any downtime to production. Supply and installation of 6 Lots of Equipment is required as follows: Lot 1: Supply and installation of Commercial Utensil Washer and Drying Tunnel, Lot 2: Supply and installation of Commercial Dough cutter/divider, Lot 3: Supply and installation of Large Commercial Quiche/Pastry Press, Lot 4: Supply and installation of Commercial Labelling Equipment, Lot 5: Supply and installation of Commercial X-Ray Unit including reject option, Lot 6: Supply and installation of Commercial UV Sanitisation Unit.Internal Control System
Veikkaus OyVeikkausFrist: 24. Aug.Veikkaus is requesting tenders for the procurement and implementation of an Internal Control System (ICS). Veikkaus will select one supplier to provide the ICS as Software. The objectives of the procurement are: • Ensure the integrity and correctness of the Games and related processes; • Strengthen Veikkaus' internal control environment in line with Finnish and EU regulation as at 1 July 2027; • Provide reliable, transparent, and auditable control evidence to authorities, internal audit, and Veikkaus management; • Integrate with Veikkaus' existing gaming and support systems; • Support both current and reasonably foreseeable future regulatory requirements regarding lottery and draw-based games. The offered solution shall be a fully functional ICS provided as a Service according to the requirements and descriptions set out in the Call for Tender documents. The agreement does not grant the supplier an exclusive right to provide the service to Veikkaus.Supermicro Server-System
Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. - Einkauf B12 - Vergabestelle BauMünchenFrist: 09. Sept.In the event that subcontractors are used, they must be named in the following text field. Indicate whether and to what percentage extent you use the capacities of
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Teagasc - the Agriculture and Food Development Authority.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.