UN-WomenLebanon
Design and facilitate Two (2) BCP Trainings - St. Vincent and the Grenadines
Dear Sir/Madam, The United Nations Entity for Gender Equality and the Empowerment of Women, hereinafter referred to as UN Women hereby invites prospective vendors to submit a proposal(s) in accordance with the Request for Proposal (RFP) documents, including General Conditions of Contract (GCC) and the Terms of Reference as set out in this...
Seminare
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- UN-Women
- Veröffentlicht:
- 02. September 2026
- Frist:
- 18. September 2026
- Thema:
- Seminare
Ausschreibungsbeschreibung
Vollständige Beschreibung anzeigenBeschreibung einklappen
Dear Sir/Madam, The United Nations Entity for Gender Equality and the Empowerment of Women, hereinafter referred to as UN Women hereby invites prospective vendors to submit a proposal(s) in accordance with the Request for Proposal (RFP) documents, including General Conditions of Contract (GCC) and the Terms of Reference as set out in this RFP. Existing Suppliers: Navigate to the Quantum Supplier Portal (http://supplier.quantum.partneragencies.org/) to log in to the system.New Suppliers: If you are viewing this notice on UNGM, click on "Links" tab >> "Supplier Registration" >> “Go to link” and you will be re-directed to the registration page of the Quantum Supplier Portal. To view the solicitation documents - click on "Links" tab >> "Negotiation Document(s)" >> “Go to link”. Please ensure to navigate to "Please click on this link before accessing the Negotiation Document(s) link" - this action needs to be done once to enable the access to the solicitation documents. For more information, see the “UN Women Quantum supplier guideline”.
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
3 Datenbereiche verfügbar
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Ähnliche Bekanntmachungen
10Provision for the Design, Development, Delivery and Certification of Capacity-Building Training Modules
UNOPSSierra LeoneFrist: 03. Sept.Tender description: RFP for the Provision for the Design, Development, Delivery and Certification of Capacity-Building Training Modules IMPORTANT NOTE: Interested vendors must respond to this tender using the UNOPS eSourcing system, via the UNGM portal. In order to access the full UNOPS tender details, request clarifications on the tender, and submit a vendor response to a tender using the system, vendors need to be registered as a UNOPS vendor at the UNGM portal and be logged into UNGM. For guidance on how to register on UNGM and submit responses to UNOPS tenders in the UNOPS eSourcing system, please refer to the user guide and other resources available at: https://esourcing.unops.org/#/Help/GuidesAssessment, Design and Development of TVET Vehicle Maintenance Training Centers
UNDPJordanFrist: 17. Sept.Please indicate whether you intend to submit a bid by creating a draft response without submitting directly in the system. This will enable the system to send notifications in case of amendments of the tender requirements. Should you require further clarifications, kindly communicate using the messaging functionality in the system. Offers must be submitted directly in the system following this link: http://supplier.quantum.partneragencies.org using the profile you may have in the portal. In case you have never registered before, you can register a profile using the registration link shared via the procurement notice and following the instructions in guides available in UNDP website: https://www.undp.org/procurement/business/resources-for-bidders. Do not create a new profile if you already have one. Use the forgotten password feature in case you do not remember the password or the username from previous registration. Search for the specific tender using search filters and subscribe to the tender in order to get notifications in case of amendments of the tender document. If you need support with the online system, you can contact the contact details of this tender as indicated in the solicitation document. UNDP OFFICEPROCUREMENT UNITNational consultancy to design and facilitate National Harm Reduction Workshop and HIV Prevention Workshop.
UNAIDSMyanmarFrist: 12. Sept.The purpose of this RFQ is to select suitable supplier for the procurement of service to provide technical support for the organizing of the national harm reduction and prevention workshops which will serve as technical input and validation mechanisms to produce recommendation and action plans. The technical assistance will focus on designing, preparing and facilitating two consultative workshops: 1. A National Harm Reduction Workshop; and 2. A National HIV Prevention Workshop focused on GC8 implementation. Duration: The consultancy is expected to be completed by 28 December 2026 (approximately 22 working days) from contract commencement. For details on the activities and expected outcomes please refer to the attached RFQ document.Independent Evaluation of the training programme for DPWI Officials, Consultants and Contractors Under the Expanded Public Works Programme (EPWP)
ILONepalFrist: 31. Aug.Dear Bidder, The International Labour Office (ILO) is pleased to invite your company to participate in the selection process for the performance of the services described in the attached ToR. To enable you to prepare and submit a bid, please download all the related annexes to this ITB from the attachment area. When preparing your submission, please bear in mind that any and all services provided to the ILO are subject to the Terms and Conditions Applicable to ILO Contracts, (https://www.ilo.org/wcmsp5/groups/public/---ed_mas/---inter/documents/legaldocument/wcms_768752.pdf), as well as any other conditions contained in or enclosed In this RFP, will become part of any contract with the successful bidder(s). Your Bid must be received no later than the specified deadline of this RFP. Bidders requiring any clarification on technical, commercial, or legal aspects of the RFP documents may notify the ILO by using the e-Sourcing platform through the “Messages” tab (refer to the “How to communicate with the Buyer” section in the Supplier User Guide). The list of all questions received in due course and ILO’s answers to them (“Q&A”) will be published on ILO e-Sourcing Platform by 11.08.26 at 10:00am GMT+2. A message notifying the publication of the Q&A will be automatically sent to all bidders that have expressed interest in participating in this RFP. Please be cautious when uploading documents to the ILO eSourcing Platform and ensure that only the technical proposal documents are uploaded into the Technical Envelope and only the financial proposal is uploaded into the Financial Envelope. An error in this regard will have an impact on an offer's eligibility for evaluation Bidders are advised to log into the eSourcing platform immediately upon receipt of such notification in order to be promptly informed of any change that may have occurred following the clarifications provided. We look forward to receiving your Proposal. Yours sincerely, ILO PRDesign and Facilitation of Child Participation for the 2026 ASEAN ICT Forum on Child Online Protection (OPEN FOR PHILIPPINE-BASED SUPPLIERS ONLY)
UNICEFIndiaFrist: 18. Sept.UNICEF has now issued a Request for Proposal LRPS 2026-9205855 in order to select a supplier for the provision of services for Design and Facilitation of Child Participation for the 2026 ASEAN ICT Forum on Child Online Protection (OPEN FOR PHILIPPINE-BASED SUPPLIERS ONLY). This tender will be run through the UNICEF e-submissions system. By clicking on the blue ‘Express Interest’ button in the UNGM tender notice, the full UNICEF e-submission system instructions to bidders document (including instructions on how to access the tender documents and submit an Offer) will be automatically emailed to the ‘contact persons’ included in your UNGM registration. Alternatively, the full UNICEF e-submission system instructions to bidders document is publicly available on the UNICEF supply internet pages here: https://www.unicef.org/supply/index_procurement_policies.html . In the tender management site, if you navigate to the documents tab and opt in to confirm your intention to submit a Bid – you will then see the mandatory placeholders for documents that must be attached prior to submitting your Offer (you will also see if there are any mandatory questionnaires to complete). As such, you are recommended to `opt in` well before the submission deadline so you are clear exactly what documents are required to be uploaded prior to completing your submission. Please note that in order to access the tender documentation through UNICEF’s e-submissions system, vendors must: (i) be registered with UNICEF in UNGM as a company/NGO; (ii) have successfully completed all mandatory information currently required by UNGM when registering. Please ensure that any files submitted as part of your Bid are not corrupt or damaged in any way. Please exercise particular caution when using compressed files. Any corrupt or damaged files may lead to your Bid being invalidated. All vendors are strongly recommended to regularly log in to the UNICEF e-submissions system to check for any deadline extensions, new clarifications, new correspondence or updated tender documents relating to this tender.Call for quotations: Design and Layout of Two ILO Publications ARMENIA
ILONepalFrist: 06. Sept.Dear Bidder, The International Labour Office (hereinafter the “ILO”) is pleased to invite your company to submit an offer for this RFQ. To enable you to prepare and submit a bid, please refer to the attached Annexes in the attachment area. The ILO must receive your offer no later than the deadline specified at the ILO e-Sourcing Platform (Jaggaer). Late offers shall be rejected. You may submit an offer to the ILO provided that your organization is qualified, able, and willing to deliver the goods, works, and/or services specified in this RFQ. Participation in this RFQ indicates acceptance of the Terms and Conditions applicable to ILO Contracts provided as a link in Annex IV. Please note that non-conformity with the Terms and Conditions applicable to ILO Contracts (Annex IV) or the additional contractual conditions stated in section 2.6 can impact the evaluation of an offer. In addition, failure to comply with the requirements of this RFQ and its Annexes may render a bid ineligible for consideration. In accordance with Article 2.2 in Annex I, bidders must upload all components of their offer before the submission deadline through the ILO e-Sourcing platform. Once the submission deadline has expired, the system will block any further upload even if partially completed. Whenever the use of the ILO e-Sourcing Platform is not possible, bidders should promptly contact ILO through the designated email : [email protected] We look forward to receiving your offer. Best regards ILORBTC-Readvertised To design and deliver a two-day OSH training programme for port workers and management representatives in the Maldives
ILONepalFrist: 11. Sept.Dear Bidder, The International Labour Office (ILO) Country Office for Sri Lanka and the Maldives is seeking an individual consultant to undertake work as an External Collaborator (Consultant Trainer). Below is a summary of the work to be performed: • Design and deliver a participatory two-day Occupational Safety and Health (OSH) training programme for port workers and management representatives in the Maldives. • Develop and adapt practical training materials using existing ILO OSH resources and findings from a recent field assessment of working conditions in the port sector. • Facilitate a two-day training workshop (planned for end-September/early October 2026) covering the Occupational Safety and Health Act (Act No. 09/2023), workplace hazard identification, risk assessment, preventive measures, workplace improvement approaches, and worker-management cooperation on OSH. • Promote practical workplace safety improvements, including the establishment and effective functioning of bipartite OSH committees. • Prepare a brief completion report and participate in a post-training debriefing session with the ILO and the Maldives Trade Union Congress (MTUC). The assignment will be conducted in close coordination with ACTRAV, the ILO OSH Specialist, and MTUC. If you are interested, please express your interest and follow the instructions provided to consult the detailed terms of reference and other relevant information on the ILO e-sourcing platform. Please submit your proposal before the specified deadline. Please note that travel is required for this assignment. The necessary travel costs will be covered by the ILO. If you are interested, please express interest and follow the instructions attached to consult the detailed terms of reference and other relevant information in the ILO e-sourcing platform. Please submit your proposal before the specified deadline. Thank youInstallation, Training and Maintenance of Laboratory Equipment for the timbuktoo
UNDPJordanFrist: 24. Aug.The United Nations Development Programme (UNDP) Rwanda, through its Governance and Digital Transformation Programme, is supporting the operationalization of the timbuktoo Health Tech Hub in Kigali, Rwanda. The Hub aims to foster innovation, research, and technology-driven solutions in the health sector by providing innovators, researchers, startups, and technology developers with access to advanced laboratory and prototyping equipment. As part of this initiative, the Hub has acquired specialized laboratory equipment, including an Opentrons Flex Liquid Handling Robot, a Formlabs Form 3 SLA 3D Printer, an Ultimaker S5 FDM 3D Printer, and associated accessories and software. To ensure the equipment is installed, commissioned, and operated in accordance with manufacturers requirements and industry standards, UNDP Rwanda invites qualified firms to submit quotations for the provision of installation, calibration, testing, user training, and post-installation maintenance support services. The selected contractor will be expected to provide a comprehensive solution covering site assessment, equipment installation and commissioning, software configuration, hands-on training for designated users, and technical support services to ensure the equipment is fully operational and the Hub staff are equipped with the necessary skills to operate and maintain the systems effectively. This procurement is conducted through a Request for Quotation (RFQ) process and the contract will be awarded to the Lowest Priced Technically Compliant Offer (LPTC) meeting all requirements specified in this solicitation. Interested suppliers must submit their offer directly in the system as instructed in the solicitation document, following the instructions in the available user guide. In case you have never registered before, you can register a profile using the registration link shared via the procurement notice and following the instructions in guides available in the UNDP website: https://www.undp.org/procurement/business/resources-for-bidders. Do not create a new profile if you already have one. Use the forgotten password feature in case you do not remember the password or the username from previous registration. Search for the specific tender using search filters and subscribe to the tender in order to get notifications in case of amendments of the tender document. If you need support with the online system, you can contact the contact details of this tender as indicated in the solicitation document. UNDP Rwanda Country Office PROCUREMENT UNITDevelopment of the Detailed Design for the Consolidation and Reconstruction of the Dormition Cathedral in Kyiv, Ukraine
UNESCOAfghanistanFrist: 02. Okt.United Nations Educational, Science and Cultural Organization (UNESCO) hereby invite qualified companies to submit sealed tenders as follows: Development of the Detailed Design for the consolidation and reconstruction of the significantly damaged roof of the Dormition Cathedral in Kyiv, Ukraine, located within the World Heritage property “Kyiv: Saint-Sophia Cathedral and Related Monastic Buildings, Kyiv-Pechersk Lavra.” The assignment concerns the preparation of a comprehensive detailed design package for the structural consolidation, restoration and reconstruction of the Cathedral following severe damage to its roof and masonry structures. The selected Design Firm will be expected to investigate and document the existing conditions and prepare the architectural, structural and building-services design documentation, technical specifications and bidding documentation required for the subsequent execution of the works. The purpose of this notice is to provide general information on the requirements for the procurement process and to inform interested suppliers how to obtain a copy of the Solicitation Documents.National Firm to Design and Deliver Targeted Capacity Building for the Mabamba
UNDPJordanFrist: 02. Sept.Title: Consulting Firm to Design and Deliver Targeted Capacity Building for the Mabamba Wetland Ecotourism Association (MWETA) The firm shall apply a participatory, learning-by-doing approach and work closely with MWETA, its subgroups, UNDP BIOFIN, the National Environment Management Authority (NEMA), Wakiso District Local Governments and other relevant stakeholders. The assignment shall cover the detailed areas as indicated in the ToR interrelated components: Please indicate whether you intend to submit a bid by creating a draft response without submitting directly in the system. This will enable the system to send notifications in case of amendments of the tender requirements. Should you require further clarifications, kindly communicate using the messaging functionality in the system. Offers must be submitted directly in the system following this link: http://supplier.quantum.partneragencies.org using the profile you may have in the portal. In case you have never registered before, you can register a profile using the registration link shared via the procurement notice and following the instructions in guides available in UNDP website: https://www.undp.org/procurement/business/resources-for-bidders. Do not create a new profile if you already have one. Use the forgotten password feature in case you do not remember the password or the username from previous registration. Search for the specific tender using search filters and subscribe to the tender in order to get notifications in case of amendments of the tender document. If you need support with the online system, you can contact the contact details of this tender as indicated in the solicitation document. [UNDP OFFICE UGANDAPROCUREMENT UNIT]
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 18. September 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist UN-Women.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.