Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. - Einkauf B12 - Vergabestelle BauMünchenTED
15 kW HT-PEMFC-System - PR1138513-2070-W
1x 15 kW HT-PEMFC-System Within the EDF-RA Calipso, Fraunhofer shall demonstrate a 15 kW methanol fuel cell system for the power supply on board of naval vessels. For this Fraunhofer will develop conceptual adaptions to the exiting design of a protypic system for land-use of an external vendor. The adaptions shall struve to match naval re...
Typ: Ausschreibung
Generatoren, Pumpen, Verfahrenstechnik, Wasseraufbereitung
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. - Einkauf B12 - Vergabestelle Bau
- Veröffentlicht:
- 15. Juni 2026
- Frist:
- Nicht angegeben
- Thema:
- Generatoren
Ausschreibungsbeschreibung
Vollständige Beschreibung anzeigenBeschreibung einklappen
1x 15 kW HT-PEMFC-System Within the EDF-RA Calipso, Fraunhofer shall demonstrate a 15 kW methanol fuel cell system for the power supply on board of naval vessels. For this Fraunhofer will develop conceptual adaptions to the exiting design of a protypic system for land-use of an external vendor. The adaptions shall struve to match naval requirements defined in the project, such as the use of neat methanol plus internal water recuperation or supply of desalinated sea water or the use of methanol from ship tanks. Tests on already procured stack of the same supplier will provide an essential input. Fraunhofer will order a modified system and test the effectiveness of the modifications at its premises.
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
7 Datenbereiche verfügbar
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Unterlagen
Freischalten50 Angaben erfasstUnterlagen · Dokumentenpaket
Auftraggeber
Freischalten6 Angaben erfasstAuftraggeber · Anschrift · Kontakt
Lose
Freischalten1 Angabe erfasstLose LOT-0000
Verfahrensdaten
Freischalten6 Angaben erfasstBekanntmachungsnummer · Verfahrensreferenz · Referenz des Auftraggebers · Verfahrensart · +2 weitere
Ausführungsorte
Freischalten2 Angaben erfasstAusführungsorte
Bieter und Auftragnehmer
Freischalten3 Angaben erfasstBieter und Auftragnehmer · Anschrift · Kontakt
Veröffentlichungsstelle
Freischalten6 Angaben erfasstVeröffentlichungsstelle · Anschrift · Kontakt
Ähnliche Bekanntmachungen
1015 kW HT-PEMFC-System
Einkauf Wissenschaftliche Geräte© 2020 Administration Intelligence AG 20Supply, Installation and maintenance of a PEM Electrolyser for Hydrogen Production at JRC Ispra
European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsFrist: 25. JuliThe procurement entails the design, manufacturing, delivery, installation, and commissioning of a Proton Exchange Membrane (PEM) electrolysis system for hydrogen production at the JRC Ispra site. The core of the system is a 50 Nm3/h electrolyser (which must be upgradable to 100 Nm3/h) that delivers hydrogen at an outlet pressure of 30 barg. The main equipment will be delivered in a containerized/skid version divided into three specific areas: a control panel area with the AC/DC converter, a water purification unit, and an ATEX-classified area containing the stacks and gas purification treatment. In addition to the containerized unit, the scope of supply includes several external components: - An MV/LV transformer - A thermal management system (dry cooler) - A low-pressure hydrogen storage system consisting of a cylinder rack at 30 bar with a total volume of 5 m3 - A gas blender installed on the outlet piping after the storage Finally, the procurement includes a comprehensive service package covering the Factory Acceptance Test (FAT), Site Acceptance Test (SAT), ATEX verification, staff training, two years of spare parts, and a 3-year maintenance contract. Reason for Purchasing The primary objective of this procurement is to produce green hydrogen by harnessing the renewable energy generated from the JRC Ispra site's internal photovoltaic (PV) plant. Currently, the site has a 1.35 MWp PV installation, which is planned to be expanded to 2 MWp and eventually 3 MWp in the future. Instead of using battery systems, the JRC intends to use the excess energy from this PV plant to power the electrolyser for self-consumption. The hydrogen produced will then be blended into the natural gas pipeline (up to a 10% volume blend) to feed the site's co-generators. A dedicated technical sizing analysis concluded that a modular 2x250 kW electrolyser is the optimal choice, as it offers the best compromise between the available PV power, the number of operating hours, and the demand frommobile heating and ventilation system plastic halls, fluid based heat pump Akkasæter region North
ForsvarsbyggOSLOFrist: 07. Aug.The Norwegian Defence Estates Agency invites tenderers to an open tender contest for the delivery of a mobile heating and ventilation system for plastic halls based on fluid based heat pump technology.Provision of a Raw Material Preparative System for BioScaleUP project at Lisheen
Technological University of the Shannon: Midlands Midwest (TUSMM)LimerickProvision of a Raw Material Preparative System for BioScaleUP project at LisheenSupply of a Recovery Station (Wash Line) including delivery, installation, commissioning, training and warranty to the TUS
Technological University of the Shannon: Midlands Midwest (TUSMM)LimerickThe supply, delivery, installation, and commissioning of a plastic waste washing line to TUS Midlands campus, Athlone. The proposed system must be designed for laboratory-to-pilot scale operation and suitable for the effective cleaning of post-consumer and post-industrial plastic materials.2026 2719 - The Supply and Provision of Robotics Equipment for the Delivery of QQI Micro Qualifications in Robotics in Advanced Manufacturing
Cavan and Monaghan Education and Training BoardMonaghanFrist: 06. JuliThis public procurement competition relates to the establishment of a single party framework for the Supply of a Robotic Training System including Delivery, Installation and Training for Cavan and Monaghan Education and Training Board. Six (6) Educational Robots are required as part of delivery of Micro Qualifications in Robotics In Advanced Manufacturing.Clustertool for Ion Beam Etching of 300mm wafers
Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e. V.ErlangenThe tender item is an ion beam etching process tool to be used for 300mm wafer fabrication at the FRAUNHOFER IPMS. The systems will be used for the processing of CMOS wafers in a cleanroom class 1000 (approximately class 6 EN ISO 14644-1) production environment. Therefore, it is necessary to fulfill require-ments regarding metal contamination and particle generation compatible with industry standards.Preliminary Market Consultation for Steam Control Valves
LandsvirkjunReykjavíkFrist: 05. Aug.Landsvirkjun would like to invite you to take part in our Preliminary Market Consultation for steam control valves that will be located in the T/G Unit valve room and form the HP separator pressure control and bypass arrangement, as indicated on P&ID drawing THT-P-LBK-T0-0515. Their primary function is to reduce the pressure of high-pressure steam that is not routed through the T/G Unit, from 27 bara to 9.3 bara, before the steam enters the existing medium-pressure system. The HP steam separator is designed for a maximum steam flow of 176 kg/s, which represents the maximum steam flow expected to be handled through the steam control valves. The T/G Unit is designed for flexible operation and variable load conditions, where the steam flow through the turbine may change depending on available steam, operating mode, start-up, shutdown, load changes and maintenance requirements. The steam control valves shall therefore be suitable for operation across a wide flow range and shall be capable of supporting stable pressure reduction from the HP steam system to the MP steam system during both partial bypass and full bypass operation. Special attention shall be given to the risk of H₂S-induced embrittlement and sulphide stress cracking, as well as the potential for SiO₂ scaling in high-temperature geothermal service. Vendors shall seek to minimize wear of valve components and noise emissions and shall avoid the use of plates or other components liable to clogging due to scaling.The supply of equipment to produce vehicle fuel from biogas at an anaerobic digestion plant
Rockbrook A.D. LtdBallyroanFrist: 06. Aug.Rockbrook A.D. Limited (Rockbrook) operates an anaerobic digestion (AD) plant at Ballyroan, Co Laois, Ireland. Rockbrook is inviting tenders for the supply, installation and commissioning of a complete system to produce renewable vehicle fuel from the biogas generated at the existing AD plant. The system shall include biogas upgrading, compression and/or other fuel conditioning equipment, together with fuel storage and dispensing facilities.Prior Information Notice – Wafer Dicing Equipment
Ferdinand-Braun-Institut gGmbH, Leibniz-Institut für HöchstfrequenztechnikBerlinFrist: 11. JuliThe Ferdinand-Braun-Institut (FBH) plans to procure mechanical wafer dicing equipment for backend processing within the framework of its ongoing infrastructure development activities. The system will be used for the separation of semiconductor wafers into individual chips (dicing). It shall support wafers up to 200 mm in diameter and be suitable for various semiconductor materials such as Si, SiC, GaN, InP and GaAs. The equipment is intended to ensure precise and reproducible dicing processes using mechanical blade-based technology. It will be installed in a cleanroom environment and must be compatible with ISO class 7 requirements. The procurement procedure is planned for 2026.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. - Einkauf B12 - Vergabestelle Bau.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.