Institute of Science and Technology AustriaKlosterneuburg
Upgrade SAXS System mit Metal Jet Quelle und Weitwinkeldetektor
Upgrade of a small angle X-ray scattering (SAXS) with Metal Jet source and wide-angle detector - The first upgrade is installation of additional, stronger (higher flux) source in order to allow for high resolution small-angle measurements. The second upgrade is with additional wide-angle X-ray scattering (WAXS) detector in order to allow,...
Type: Tender
Laboratory Instruments
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Institute of Science and Technology Austria
- Published:
- July 29, 2026
- Deadline:
- Not specified
- Topic:
- Laboratory Instruments
Tender description
Upgrade of a small angle X-ray scattering (SAXS) with Metal Jet source and wide-angle detector - The first upgrade is installation of additional, stronger (higher flux) source in order to allow for high resolution small-angle measurements. The second upgrade is with additional wide-angle X-ray scattering (WAXS) detector in order to allow, in combination with current detector, for simultaneous measurement of short- and long-range order.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
4 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Related tenders
10Upgrade SAXS System
Institute of Science and Technology Austria (ISTA)KlosterneuburgUpgrade of a small angle X-ray scattering (SAXS) with Metal Jet source and a wide-angle detector - The first upgrade is installation of additional, stronger (higher flux) source in order to allow for high resolution small-angle measurements, in order to elucidate unambiguously determine structure of nanoparticle assemblies. The second upgrade is with additional wide-angle X-ray scattering (WAXS) detector in order to allow, in combination with current detector, for simultaneous measurement of short-range (atomic level) and long-range order.Upgrade SAXS-System mit Metal-Jet-Quelle und WAXS-Detektor
Institute of Science and Technology Austria (ISTA)KlosterneuburgUpgrade eines SAXS-Systems mit Metal-Jet-Quelle und WAXS-Detektor für hochauflösende Messungen.Purchase of custom-made gamma spectrometer
Danmarks Tekniske Universitet - DTUKgs. LyngbyTechnical University of Denmark (DTU Physics) wishes to procure a complete high-purity germanium (HPGe) gamma spectrometry system for ultra-low-background gamma-ray spectrometry for samples in a stick geometry. The system will be used for high-sensitivity measurements of environmental, ge-ological and archaeological samples, with particular emphasis on the determination of natural radionu-clides in small-volume samples. The system will replace an existing instrument that has reached the end of its operational lifetime and is required to maintain the department's research capabilities in gamma spectrometry. The procurement includes an HPGe well detector, digital spectroscopy elec-tronics, data acquisition and analysis software ideally compatible with the existing gamma spectros-copy systems in the laboratory. The required system must provide a specialised HPGe well detector with ultra-low-background con-struction and a well geometry suitable for high-efficiency measurements of very small samples pre-pared in a defined stick geometry. These characteristics are essential for the research applications carried out at DTU Physics and cannot be substituted by a conventional coaxial HPGe detector. In addition, the detector must integrate with the laboratory's existing measurement infrastructure and data analysis workflows to ensure continuity of ongoing research activities. The proposed detector, manufactured by Mirion Technologies and supplied through a distributor, fulfils these technical re-quirements. Based on our technical assessment, this solution is considered the only technically suit-able option, and the contract is therefore awarded pursuant to § 80, stk. 3, nr. 2 (lack of competition for technical reasons).Prior Information Notice – RF Measurement System for On-Wafer Characterisation
Ferdinand-Braun-Institut gGmbH, Leibniz-Institut für HöchstfrequenztechnikBerlinDeadline: Jul 12The Ferdinand-Braun-Institut (FBH) plans to procure a high-frequency RF measurement system for on-wafer characterisation within the framework of the EU-funded APECS programme. The system will be used for the electrical characterisation of semiconductor devices, circuits and demonstrators, including single-ended and differential measurements in the mmWave frequency range. It is intended to support advanced heterointegration processes and ensure reliable and high-quality measurement results. The equipment shall enable automated, high-precision measurements and provide a versatile platform for RF analysis, including network and spectrum measurements. It will be integrated into existing cleanroom and measurement environments. The procurement procedure is planned for 2026.Upgrade of engine monitoring system (ICAS) for icebreaker Atle and Ymer
SjöfartsverketNORRKÖPINGThe Swedish Maritime Administration is to upgrade the engine monitoring and control system (ICAS) with power sharing system for icebreaker Atle and Ymer. This procurement includes all components referred to in the specification of requirements, both hardware and software.European Tender Electron Beam Lithography system
Universiteit TwenteEnschedeDeadline: Aug 14The University of Twente is tendering to purchase an Electron Beam Lithography system. The MESA+ Institute of the University of Twente will invest in a new Electron Beam system (e-beam system). A system, suitable for defining patterns in electron sensitive resists, at high resolution and high speed, compatible with a wide range of applications and substrate types up to 200mm in diameter. The system will be used by a wide range of users, i.e. academic researchers and students as well as industrial engineers with different backgrounds (photonics, (nano)-electronics etc.) and different levels of expertise.European Tender Electron Beam Lithography system
Universiteit TwenteEnschedeDeadline: Aug 21The University of Twente is tendering to purchase an Electron Beam Lithography system. The MESA+ Institute of the University of Twente will invest in a new Electron Beam system (e-beam system). A system, suitable for defining patterns in electron sensitive resists, at high resolution and high speed, compatible with a wide range of applications and substrate types up to 200mm in diameter. The system will be used by a wide range of users, i.e. academic researchers and students as well as industrial engineers with different backgrounds (photonics, (nano)-electronics etc.) and different levels of expertise.Prior Information Notice – RF On-Wafer Probe Station
Ferdinand-Braun-Institut gGmbH, Leibniz-Institut für HöchstfrequenztechnikBerlinDeadline: Jul 12The Ferdinand-Braun-Institut (FBH) plans to procure an automated RF on-wafer probing system within the framework of the EU-funded APECS programme. The system will be used for electrical characterisation of semiconductor devices, circuits and demonstrators at wafer level. It is intended to enable high-frequency and mmWave measurements under controlled and reproducible conditions. The equipment shall support automated probing of wafers up to 200 mm in diameter and provide a versatile platform for a wide range of RF measurements. It will be installed in a cleanroom environment and integrated into existing measurement and process workflows. The procurement procedure is planned for 2026.Supply and Maintenance of Non-Destructive Assay System for Radioactive Waste Measurement
European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsDeadline: Jul 25NDA system needed for the measurements of radioactive waste and waste for clearance. Characterization of waste leaving the nuclear controlled areas is a legal obligation. The currently used system is at end of life and for complying with the legal requirements an new system needs to be installed.High resolution nano-XCT system
Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. | IMWS vertreten durch: Fraunhofer-Institut für Mikrostruktur von Werkstoffen und Systemen IMWSHalle (Saale)Deadline: Sep 04The Fraunhofer Institute for Microstructure of Materials and Systems IMWS researches the application behaviour, reliability, safety and lifetime of innovative materials in components and systems. The Business Unit “Electronic Materials and Components” Fraunhofer IMWS support industry and research partners by its internationally recognized expertise in failure analyses of electronic components. Fraunhofer IMWS will enhance its capabilities for advanced failure analysis and material characterization to support the ramp up of new heterogenous integration technologies addressing the manufacturing and reliability challenges. To enable the non-destructive detection and evaluation of structural deviations, contact defects, damage characteristics and their most precise possible localization in the package to enable further high-resolution physical diagnostics, the latest generation of radiography (2D) and X-ray tomography (3D-CT) systems are required in particular for the non-destructive detection and evaluation of structural deviations, contact defects, damage characteristics and their most precise possible localization in the package to enable further high-resolution physical diagnostics. A high-performance multi-processor workstation is required for postprocessing of the generated imaging data sets to identify tiny deviations and defects within the devices. This tender is for the supply a functional complete device including assembly, commissioning and all necessary connections, approvals/certifications and software for operation. The requirements for a state-of-the-art x-ray inspection tool for highly integrated 2.5/3D components are described below:
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- No specific submission deadline is currently stated for this notice.
- Who is the contracting authority?
- The contracting authority is Institute of Science and Technology Austria.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.