Finnish CustomsHelsinkiTED
Anschaffung und Wartung eines UHPLC-MS/MS Systems zur Analyse von Pestiziden in pflanzlichen Lebensmitteln
This call for tenders concerns UHPLC-MS/MS (triple quadrupole) system, which will be used in quantitative analysis of pesticides (multiresidue method as well as polar pesticides) in plant-based food products in Finnish Customs Laboratory. The number of different pesticides that need to be analyzed in one run is around 250-300 and the resu...
Submission deadline: August 14, 2026 (expired)Type: Tender
Laboratory Instruments
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Finnish Customs
- Published:
- May 31, 2026
- Deadline:
- August 14, 2026
- Topic:
- Laboratory Instruments
Tender description
Show full descriptionCollapse description
This call for tenders concerns UHPLC-MS/MS (triple quadrupole) system, which will be used in quantitative analysis of pesticides (multiresidue method as well as polar pesticides) in plant-based food products in Finnish Customs Laboratory. The number of different pesticides that need to be analyzed in one run is around 250-300 and the results are verified according to Sante guidance (Analytical quality control and method validation procedures for pesticide residue analysis in food and feed, SANTE/11312/2021 V2026, Implemented 01/01/2026.) The essential part of the pesticide analysis is software, which allows efficient and accurate analysis of LC-MS data. In addition to UHPLC-MS/MS system, the procurement also concerns the maintenance agreement for four (4) years. One (1) supplier will be selected for the procurement in accordance with the terms and conditions set in this call for tenders and its appendices. The supplier will be selected based on determining the most economically advantageous tender. The criteria for determining the most economically advantageous tender are price (10%) and quality-related grounds (90 %). The total score will be 100. The total price may not exceed 436 700 € (VAT 0%). If the total price is more than EUR 436 700 € (VAT 0%), the offer in question will be rejected.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
6 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock1 detail capturedLots LOT-0000
Procedure data
Unlock6 details capturedPublication number · Procedure reference · Buyer reference · Procedure type · +2 more
Performance locations
Unlock3 details capturedPerformance locations
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
10LC-MS/MS columns for Helse Bergen HF
SYKEHUSINNKJØP HFVADSØDeadline: Jul 03The objective of the procurement is to procure columns for use in LC-MS/MS analysis of urine, blood and spit. Tenders are wanted for the following columns: 1. Pursuit 3 C18 100 x 4.6mm 3 μm 2. Zorbax Eclipse XDB-C18 4.6x50mm 1.8μm 400 bar 3. Zorbax Eclipse XDB-C18, 3.0x50mm, 1.8μm 600bar 4. Zorbax Eclipse Plus C18 RHD, 2.1 x 50 mm, 1.8 μm 5. CarpenterLab Poroshell 120 Chiral-V, 2.7 μm, 2.1 x 150 mm The columns shall be used for routine determination of protoporfyrin IX in erytrocytes (1), porphytes in faeces, plasma and urine (2), MMA (3), steroid hormones in serum (4) and kiral separation of amphetamines in spit and urine (5). Other areas of use and sample matrix can be used. The columns are sometimes also used for research analyses, i.e. determination of substances in serum, plasma, urine and/or spinal fluid. A framework agreement shall be signed for the procurement of columns. See Annex 1 - Price Form for the estimated volume. The stated consumption/extent is an estimate for information to the tenderer and is not binding for the future contract volume. If different pack sizes can be offered (e.g. packs of three), the Contracting Authority would like to receive tenders for the pack size that will give the lowest unit price. See Annex 2 - Requirement Specification and Annex 1 - Price Form for further details.26178 Analysis instrument for lab
Innkjøpskontoret ASHEGGEDALDeadline: Aug 26The competition is for the delivery of an analysis instrument for a lab. The analysis instrument shall be used for hybrid multi-mode plate reading and automated cell-imaging for cell based analysis, kinetics and long term live cell imaging. The procurement ́s value is estimated to: NOK 2,400,000 excluding VAT. The volume is an estimate and is not binding for the contracting authority. Apprentices: The contracting authority has assessed the procurement against the apprentice regulations, c.f. the Procurement Act § 5h, and concluded that apprentices are not required in this procurement as the procurement is an goods procurement, c.f. the Procurement Act § 5h 1 paragraph.Instruments for clinical chemistry-immune chemistry and infection immunology For Nord-Trøndelag Health Trust (new round).
SYKEHUSINNKJØP HFVADSØDeadline: Jun 241.2. The objective and scope of the procurement is to procure instruments for clinical chemistry, immunology and infection screening analyses with the accompanying reagents/instruments/consumables etc. for use at The Regional Health Authority Nord-Trøndelag. Tenders are wanted for the price per sample result. The price shall include the instrument (which is the tenderer ́s property), reagents, supplier specific checks, supplier specific calibrators, consumables, full service agreement cooperation, all including, defined response time for problems, support, connection data (Epic, Beaker), installation, entry, training in the system and relevant user meetings. Invoices shall be invoiced monthly in accordance with statistics from sample answers. The delivery must be inclusive of all components/accessories, assembly/installation and commissioning so that it functions as a whole based on the needs and requirements described. This is to be in accordance with all requirements in the tender documentation.LA3190C - RFT for the Supply, Delivery, Installation and Validation of Laboratory Equipment comprising of two (2) Lots for University College Cork (UCC)
Education Procurement Service (EPS)LimerickUniversity College Cork request the supply of an argon recirculating glovebox with integrated deposition tools (Lot 1). The glovebox which will be capable of processing lithium-based battery materials and will integrate materials deposition capability utilizing RF sputtering and evaporation for synthesis and multi-parametric test of liquid, polymer and solid-state systems for energy devices. The equipment will be used for liquid, polymer and all solid-state stacks of energy devices to be fabricated with the interface control giving enhanced energy and power density and device lifetimes. In particular, the RF sputter tool will enable true solid state electrolyte deposition. This integrated research tool will enable analysis of the key role of the interface in the achievement of next generation active materials and electrolyte interactions. The integrated deposition tools will be capable of sequential layer deposition. Compatibility with and ability to process potential future batteries based on more sustainable materials such as sodium and iron will also require such a capability. The deposition suite will also permit advances focussed on integrated magnetic devices including CoFe and CoFeN alloys materials and multilayer films. The integrated system will include ALD processing capability of the Plasma enhanced Atomic Layer Deposition (ALD) Tool (Lot 2) as interface engineering and control are key to the development of the tailored energy materials for electrode and electrolyte enhancement in batteries, supercapacitors and PV devices1105601 UiO Life Science user equipment K930.02.01 Photometer
STATSBYGGOSLOStatsbygg constructs the new Life Sciences Building (LVB) for the University of Oslo and Oslo University Hospital on behalf of the Ministry of Education and Research and South-East Health as the co-contracting authority. The building shall be the workplace for approx. 1,600 employees and 1,600 students. Start up for the excavation and ground work was the second quarter of 2019 and the planned completion is at the end of 2026. Various professional environments shall work multi-disciplinary here to develop new solutions for major challenges within health and sustainability with access to the best and most modern equipment required to carry out world class research, teaching and innovation.Outer machine for the Department of Microbiology and Infection Protection with UNN HF Tromsø.
SYKEHUSINNKJØP HFVADSØDeadline: Jul 24The University Hospital of North Norway Health Trust shall replace the current equipment and wishes to come into contact with potential suppliers for dialogue. There are limitations on the area, so that a new instrument must be able to be placed within the following targets: The limitation for this procurement is the area, so that a new instrument cannot exceed H2000mm x D1900mm x L3000mm including service, inspection and service area. Interested parties can contact by 30.06.2026 for a one-to-one dialogue after further agreement.Hotplate zur Temperung großflächiger Substrate für Elektronenstrahllithografie
Friedrich-Schiller-Universität JenaJenaEs soll eine halbautomatische Hotplate zur Temperung von mit Resists beschichteten Substraten für hochauflösende Elektronenstrahllithografie beschafft werden. Die Anlage dient zur definierten Pre- und Post-bake chemisch verstärkter Resists, wie bspw. FEP171, bei denen die Empfindlichkeit wesentlich durch das Temperatur Zeit Profil und die Temperatur-Homo genität bestimmt wird. Zu prozessierende Substrate umfassen u.a. 300mm-Wafer, sowie rechteckiger Glas-Substrate bis zu L x B x H = 300mm × 275mm × 15mm. Aus diesen technischen Randbedingungen ergeben sich die folgenden Anforderungen:, siehe Anlage 2.Silicon Austria Labs – Photonic debonder (manual/ semi-automated)
SteiermarkLieferung, Installation und Inbetriebnahme eines manuellen/halbautomatischen Photonic Debonders für Silicon Austria Labs GmbH.Kauf von drei Pflanzenwachstumsinkubatoren für die Aufzucht von Pflanzen in Erde
Institute of Science and Technology AustriaKlosterneuburgDeadline: Jul 10Kauf von 3 Pflanzenwachstumsinkubatoren für Aufzucht unter definierten Bedingungen, inkl. austauschbarer Leuchten für flexibles LichtspektrumFluNQyLab_Zeitaufgelöstes Konfokal-Fluoreszenzmikroskop
Friedrich-Schiller-Universität JenaJenaDie Friedrich-Schiller-Universität Jena beabsichtigt für Forschungszwecke ein (1) vielseitiges und benutzerfreundliches zeitaufgelöstes Konfokal-Fluoreszenzmikroskop anzuschaffen, welches die optische Charakterisierung von vereinzelten sowie an optische Nanostrukturen gekoppelten Quan tenemittern ermöglicht. Das System benötigt eine entsprechend hohe räumliche Auflösung zur Abbildung nanoskaliger Strukturen, hohe Sensitivität zur Detektion einzelner Quantenemitter, sowie Zeitauflösung zur Charakterisierung der Emissionsdynamik in gekoppelten Systemen. Um die Anre gung verschiedener zu untersuchender Emittersysteme sicherzustellen, werden Anregungslaser bei verschiedenen Wellenlängen im UV- und VIS-Bereich benötigt, wobei ein schnelles Umschalten zwischen den verschiedenen Laserquellen möglich sein muss. Der Anregungslaserfokus muss dabei mit nanoskaliger Genauigkeit über die untersuchte Probe gescannt werden können und so eine zwei- bzw. prinzipiell auch dreidimensionale Bildgebung sowie Punktmessungen mit hoher Positionier genauigkeit im Nanometerbereich zu ermöglichen. Des Weiteren soll die Möglichkeit einer Weitfeldanregung für schnelle Übersichtsmessungen der räumlichen Lichtverteilung bestehen. Detektorseitig werden schnelle Detektoren mit Einzelphotonensensitivität im sichtbaren Spektralbereich benötigt. Eine leistungsfähige und schnelle Elektronik ist für Messungen der strahlenden Lebensdauer mit Zeitauflösung bis in den Picosekundenbereich essenziell. Die Anforderung, Messungen der Photonenstatistik zum Nachweis von Einzelphotonenemittern (Antibunching) oder auch von Lasing in Nanostrukturen zu ermöglichen, resultiert des Weiteren in der Notwendigkeit einer speziellen Anordnung (Hanbury-Brown-Twiss Setup) von mehreren schnellen Detektoren und der elektronischen Unterstützung von oinzidenzmessungen. Zur quantenoptischen Untersuchung von Systemen mit mehr als einem Emitter werden dabei mindestens drei in einem Detektorbaum angeordnete Detektoren benötigt. Essenziell wichtig für die geplanten Experimente sind zudem spektral aufgelöste Messungen. Das zeitaufgelöste Konfokal-Fluoreszenzmikroskop soll daher eine leistungsfähige Spektrographenerweiterung mit hoher Quanteneffizienz erhalten, welche separat beschrieben ist (siehe LV_FluNQyLab_Spektrographenerweiterung). Diese Kombination ermöglicht eine multidimensionale Analyse der Emissionseigenschaften einer großen Bandbreite von Quantenemittern in lichtemittierenden Nanostrukturen sowie auf funktionalen Substraten. Als Budget steht ein maximaler Betrag in Höhe von 520.000,00 Euro brutto zur Verfügung. Die Vergabestelle behält sich vor Angebote über diesem Wert von der Wertung auszuschließen. Liegen alle wertbaren Angebote über diesem Betrag ist die Vergabestelle berechtigt die Ausschreibung auf zuheben. Folgende Spezifikationen/Eigenschaften müssen mindestens erfüllt werden: siehe Anlage 2.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 14. August 2026.
- Who is the contracting authority?
- The contracting authority is Finnish Customs.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.