Oslo Universitetssykehus HF (hovedenhet)OSLOTED
RA KRE KRF Automatic electrophores instruments for RNA and DNA (2 items)
Oslo University Hospital HF (OUS) has signed a contract with Matriks AS for the procurement of two automated electrophor instruments that shall be used for quality control of DNA and RNA samples in connection with NGS and dPCR projects. The procurement also includes options for a total of 10 instruments, as well as options for service agr...
Type: Tender
Measurement Technology, Laboratory Instruments
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Oslo Universitetssykehus HF (hovedenhet)
- Published:
- September 07, 2026
- Deadline:
- Not specified
- Topic:
- Measurement Technology
Tender description
Oslo University Hospital HF (OUS) has signed a contract with Matriks AS for the procurement of two automated electrophor instruments that shall be used for quality control of DNA and RNA samples in connection with NGS and dPCR projects. The procurement also includes options for a total of 10 instruments, as well as options for service agreements and servicing.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
6 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock1 detail capturedLots LOT-0000
Procedure data
Unlock5 details capturedPublication number · Procedure reference · Procedure type · Contract type · +1 more
Performance locations
Unlock3 details capturedPerformance locations
Bidders and contractors
Unlock3 details capturedBidders and contractors · Address · Contact
Related tenders
10APECS/INL-04 - CONTRACT FOR THE SUPPLY AND INSTALLATION OF EQUIPMENT AND COMPONENTS WITHIN APECS (ADVANCED PACKAGING FOR ELECTRONICS COMPONENTS AND SYSTEMS AND HETEROGENEOUS) PILOT LINE
INL - INTERNATIONAL IBERIAN NANOTECHNOLOGY LABORATORYBragaThe subject matter of this contract is the supply and installation of scientific equipment and components to INL, listed below and detailed in Schedule V attached to these Standard Specifications (from now on referred to as ‘Specifications’). The equipment listed in Schedule V are the lots that the tender comprises. Tenderers may bid for one or more lots. The subject matter of the contract, in all cases, does not include so-called refurbished scientific instruments and equipment. The single lot comprising the tender is as follows: 1. Automated system for controlled wet processes for NEMSRFI - 1105601 UiO Life Sciences user equipment. K970.07 Low temperature and magnetic field system for material characterisation.
STATSBYGGOSLODeadline: Sep 25Statsbygg is constructing the new Life Sciences Building (LVB) for the University of Oslo and Oslo University Hospital, on behalf of the Norwegian Ministry of Education and Research, with the South-Eastern Norway Regional Health Authority as co-commissioning authority. The building will provide workplaces for approximately 1,600 employees and 1,600 students. Excavation and groundwork commenced in the second quarter of 2019, and completion is scheduled for the end of 2026. The building will bring together a range of academic and research disciplines in a joint interdisciplinary environment to develop new solutions to major challenges in health and sustainability, with access to the best and most modern equipment required to conduct world-class research, teaching and innovation.Elemental Analyzer-Isotope Ratio Mass Spectrometer (EA-IRMS) and entry-level Elemental Analyzer (EA)
University of JyväskyläJyväskylän yliopistoUniversity of Jyväskylä (JYU) is inviting tenders for an Elemental Analyzer-Isotope Ratio Mass Spectrometer (EA-IRMS) and for an entry-level Elemental Analyzer (EA) devices. EA-IRMS device shall be a fully automated single system for carbon, nitrogen, and sulphur analysis by flash combustion, and oxygen and hydrogen analysis by high temperature pyrolysis (reduction). The subject of the procurement is an EA-IRMS for the high-precision measurement of carbon (C), nitrogen (N), sulphur (S), oxygen (O) and hydrogen (H) isotope ratios (i.e., δ13C, δ15N, δ34S, δ18O and δ2H values) in solid environmental matrices. The device will primarily be used for the analysis of carbon, nitrogen, and sulphur. The instrument is to be optimized for continuous flow operation, but includes also a connection(s) for low flow peripherals. A separate Entry-level elemental analyzer (EA) for carbon, hydrogen and nitrogen (CHN) analysis of solid environmental matrices is also included in the procurement.Turnkey Filtered Rayleigh Scattering (FRS) System for the combined measurement of pressure, temperature and three-component velocity field in gaseous flows
Aarhus UniversitetAarhus CAarhus University intends to award a contract without prior publication pursuant to section 80(3)(2) and section 80(4) of the Danish Public Procurement Act, cf. Article 32(2)(b)(ii) of Directive 2014/24/EU, on the basis that the required supplies and services can only be provided by one particular economic operator due to an absence of competition for technical reasons. Aarhus University has assessed that no reasonable alternative or substitute exists, and that the absence of competition is not the result of an artificial narrowing of the parameters of the procurement. The intended contract concerns the delivery of a complete turnkey Filtered Rayleigh Scattering (FRS) system for laser-based diagnostics in gaseous flows. The system is required for quantitative planar measurements of pressure, temperature and three-component velocity information in a measurement region of up to 100 mm × 100 mm. The required system must comprise, as one integrated measurement chain, a frequency-tunable narrow-linewidth laser source at approximately 532 nm, high-precision wavelength measurement and stabilisation, iodine-based molecular filtering, beam delivery and light-sheet optics, multi-perspective imaging from nine viewing directions, perspective calibration, control and data acquisition functionality, installation, commissioning, documentation, training and acceptance testing. The decisive requirement is not the supply of individual optical, laser, imaging or software components, but the delivery of a complete and operational FRS measurement system where one supplier assumes responsibility for the integration, calibration, commissioning and verified performance of the complete measurement chain. FRS measurements depend on the combined and synchronised performance of laser frequency control, molecular filter transmission, optical alignment, light-sheet formation, imaging geometry, calibration and data acquisition. These elements are technically interdependent and jointly determine whether the system can produce usable calibrated data for pressure, temperature and three-component velocity evaluation. In Aarhus University’s assessment, procuring individual components from several suppliers would not constitute a reasonable alternative or substitute, as it would not provide a supplier with overall responsibility for the integration, calibration, commissioning and verified performance of the required operational FRS functionality. Based on Aarhus University’s technical and market assessment, ILA R&D GmbH is the only economic operator identified as capable of delivering the required complete turnkey FRS system and assuming responsibility for its overall functionality. Other suppliers considered may be able to provide individual components or related optical flow-diagnostic systems, such as lasers, wavelength meters, cameras, optical components, PIV/PTV, LDV, LIF, BOS, Rayleigh/scalar imaging or software interfaces. However, Aarhus University has not identified a reasonable alternative or substitute capable of delivering the specific integrated FRS solution required, including iodine-filtered FRS, frequency-scanning and single-frequency operation, nine-perspective imaging, perspective calibration and acceptance testing of the complete system. Aarhus University therefore considers that the intended direct award is justified by the absence of competition for technical reasons. The absence of competition results from the technical requirements of the intended FRS measurement concept and the need for one supplier to deliver and take responsibility for the complete integrated system, and not from an artificial narrowing of the parameters of the procurement.RFI - 1105601 UiO Life Sciences user equipment. K970.01 Laser microdissection microscope for DVP
STATSBYGGOSLODeadline: Sep 30Statsbygg is constructing the new Life Sciences Building (LVB) for the University of Oslo and Oslo University Hospital, on behalf of the Norwegian Ministry of Education and Research, with the South-Eastern Norway Regional Health Authority as co-commissioning authority. The building will provide workplaces for approximately 1,600 employees and 1,600 students. Excavation and groundwork commenced in the second quarter of 2019, and completion is scheduled for the end of 2026. The building will bring together a range of academic and research disciplines in a joint interdisciplinary environment to develop new solutions to major challenges in health and sustainability, with access to the best and most modern equipment required to conduct world-class research, teaching and innovation.Fast 3D live cell imaging microscope
Tampere University Foundation srTampereDeadline: Sep 28Tampere University Foundation sr (hereinafter referred to as ”Customer” or ”Contracting Authority”) requests a tender in accordance with the contract notice published on the Hilma notice channel and this call for tenders and its appendices for Fast 3D live cell imaging microscope (hereinafter referred to as "System" or "Device"). The device is intended for fluorescence imaging of live cells, model organisms, and 3D cell cultures. The device incorporates novel technology that enables imaging using low excitation light intensities. The device must comply with the system minimum requirements set out in the Call for Tenders including microscope body minimum requirements, fast 3D imaging minimum requirements and software and computer minimum requirements. The procurement includes delivery of the device to Tampere University’s Kauppi campus, installation, commissioning, user training, technical support, warranty, and the availability of maintenance services. Further details of the requirements are provided in the “Procurement Object Criteria” section of this Call for Tenders. Price ceiling: The tender price must be less than or equal to 514 000 EUR excluding VAT. Further information is provided in Annex 1 "Price and quality form". One (1) supplier will be selected and awarded the contract. The procurement contract draft can be found as Annex 2. The agreement period begins with the signing of the contract, and it is valid until the contractual obligations have been fulfilled. The contract does not grant the selected supplier exclusive rights to the subject matter of the procurement.PR 086/2026 for Procurement of Tissue Culture Laboratory Equipment and Materials for the University of Juba
FAONigerDeadline: Sep 14The Food and Agriculture Organization of the United Nations (FAO) invites you to submit an offer for the procurement of Tissue Culture Laboratory Equipment and Materials for the University of Juba. If you are interested in submitting an offer, please make sure to have, at least, a UNGM Basic Registration with FAO (www.ungm.org). Instructions on how to access FAO tender documents through UNGM are attached to the present Notice under the “DOCUMENTS” tab; please follow these instructions when submitting your bid. OFFERS WILL ONLY BE ACCEPTED IF SUBMITTED THROUGH THE UNGM PORTAL. OFFERS NOT SUBMITTED THROUGH THE UNGM PORTAL WILL BE INVALIDATED. Many thanks and best regards, FAO PROCUREMENT SERVICELieferung und Installation von Ausrüstung für die APECS-Pilotlinie (Hochleistungsfemtosekundenlaser)
INL - INTERNATIONAL IBERIAN NANOTECHNOLOGY LABORATORYBragaThe subject matter of this contract is the supply and installation of scientific equipment and components to INL, listed below and detailed in Schedule V attached to these Standard Specifications (from now on referred to as ‘Specifications’). The equipment listed in Schedule V are the lots that the tender comprises. Tenderers may bid for one or more lots. The subject matter of the contract, in all cases, does not include so-called refurbished scientific instruments and equipment. The single lot comprising the tender is as follows: 1. High Power Femtosecond Laser The project is co-funded by the EU Chips Joint Undertaking under the Joint Procurement Agreement signed between INL and Chips JU.Supply, Delivery, Installation of an Electrochemical Multichannel Workstation for TU Dublin
Technological University DublinDublinDeadline: Sep 16Tenders are sought for an electrochemical multichannel workstation. The proposed instrument should support a wide range of scientific and industrial applications, including corrosion monitoring, energy storage research (batteries and supercapacitors), green hydrogen production via electrolysis, environmental analysis, and pharmaceutical/biomedical research.RFQ - Zetasizer - Re-advert
UNDPJordanDeadline: Sep 06SCOPE OF TENDER - Request for Zetasizer for the National Bioprospecting, Natural Product Development and ABS Compliance Laboratory - RE -Advert Interested suppliers must submit their offer directly in the system as instructed in the solicitation document, following the instructions in the available user guide. In case you have never registered before, you can register a profile using the registration link shared via the procurement notice and following the instructions in guides available in the UNDP website: https://www.undp.org/procurement/business/resources-for-bidders. Do not create a new profile if you already have one. Use the forgotten password feature in case you do not remember the password or the username from previous registration. Search for the specific tender using search filters and subscribe to the tender in order to get notifications in case of amendments of the tender document. If you need support with the online system, you can contact the contact details of this tender as indicated in the solicitation document. [UNDP OFFICE LesothoPROCUREMENT UNIT]
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- No specific submission deadline is currently stated for this notice.
- Who is the contracting authority?
- The contracting authority is Oslo Universitetssykehus HF (hovedenhet).
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.