WHODjibouti
Provision of Indoor and Outdoor Electrical Works for the Laboratory Building (Readvertisement)
The World Health Organization (WHO) Country Office in Mongolia seeks a qualified, experienced, and legally registered contractor to undertake the Provision of Indoor and Outdoor Electrical Works for the Laboratory Building located in Ulaanbaatar, Mongolia. The objective of this assignment is to design, supply, install, test, commission, a...
Submission deadline: September 04, 2026 (expired)Type: Tender
Electrical Installation
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- WHO
- Published:
- September 01, 2026
- Deadline:
- September 04, 2026
- Topic:
- Electrical Installation
Tender description
Show full descriptionCollapse description
The World Health Organization (WHO) Country Office in Mongolia seeks a qualified, experienced, and legally registered contractor to undertake the Provision of Indoor and Outdoor Electrical Works for the Laboratory Building located in Ulaanbaatar, Mongolia. The objective of this assignment is to design, supply, install, test, commission, and hand over all required electrical systems and associated infrastructure necessary to ensure the safe, reliable, and efficient operation of the laboratory facility. The works shall comply with applicable Mongolian regulations, international electrical standards, occupational safety requirements, and relevant laboratory infrastructure standards. Instructions for Submission of Proposals Proposals must be submitted no later than 4 September 2026, 12 midnight (UTC+8). All submissions should be made through the WHO e‑Tendering Platform (In‑Tend). In the event of technical difficulties with uploading, proposals may alternatively be submitted to [email protected] and [email protected] When submitting by email, please ensure the following subject lines are used: Technical Proposal – WPRO/DAF/SAO/SUP/P/0009508 Financial Proposal – WPRO/DAF/SAO/SUP/P/0009508 Note: Technical and Financial Proposals must be sent in separate emails. For ease of tracking, always quote the WHO Bid Reference No. in the subject line of all related correspondence. This is a re-advertisement of WHO Bid Reference No. WPRO/DAF/SAO/SUP/P/0009477. Suppliers who have already submitted proposals under the original solicitation are not required to submit their offers.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
3 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Related tenders
10Provision of Indoor and Outdoor Electrical Works for the Laboratory Building
WHODjiboutiDeadline: Aug 26The World Health Organization (WHO) Country Office in Mongolia seeks a qualified, experienced, and legally registered contractor to undertake the Provision of Indoor and Outdoor Electrical Works for the Laboratory Building located in Ulaanbaatar, Mongolia. The objective of this assignment is to design, supply, install, test, commission, and hand over all required electrical systems and associated infrastructure necessary to ensure the safe, reliable, and efficient operation of the laboratory facility. The works shall comply with applicable Mongolian regulations, international electrical standards, occupational safety requirements, and relevant laboratory infrastructure standards.Training and Coaching of Regulatory Inspectors for WHO Good Manufacturing Practices on Sterile Pharmaceuticals (Readvertisement)
WHODjiboutiDeadline: Sep 17National regulatory authorities and ministries of health increasingly require inspectors who can assess sterile pharmaceutical products, vaccines, biotechnology products and other biologicals using a risk-based and evidence-led approach. Sterile manufacturing is a high-risk area because weaknesses in contamination control, aseptic processing, environmental monitoring, sterilization, utilities, data integrity, investigations or CAPA may have direct implications for patient safety and product quality. The underlying concept note recommends a staged, competency-based pathway consisting of self-paced online learning, instructor-led interactive core online course with substantial practical work, and three to six months of regular online mentored follow-up during which 5-working-day in-country training and coached mock inspection led by instructors in two targeted countries including Mongolia and Lao PDR. The course should be grounded primarily in WHO GMP main principles, WHO GMP for sterile pharmaceutical products, WHO GMP for biological products, WHO guidance on quality risk management, validation, water for pharmaceutical use, data integrity, inspection reporting, desk assessment, reliance and inspectorate quality management. The overall objective is to design, develop, deliver and evaluate a practical, competency-based WHO GMP Sterile Manufacturing Inspector Training Course that enables participating inspectors to contribute safely and effectively to supervised GMP inspections of sterile medicines and biological products, and to progress toward independent competence through post-course mentoring and documented practice. This is a re-advertisement of WHO Bid Reference No. WPRO/DAF/SAO/SUP/P/0009482. Suppliers who have already submitted proposals under the original solicitation are not required to submit their offers. Instructions for Submission of Proposals Proposals must be submitted no later than 17 September 2026, 3:00 PM (UTC+8). All submissions should bServices for Organization and Delivery of Cascade Training for Users of the Laboratory Information System (LIS) and Biosafety Capacity Building (BB) Programs for SES Uzbekistan
UNOPSSierra LeoneDeadline: Sep 03This RFP refers to Provision of Services for Organization and Delivery of Cascade Training for Users of the Laboratory Information System (LIS) and Biosafety Capacity Building (BB) Programs for SES Uzbekistan. Proposal must cover 100% of the services specified. IMPORTANT NOTE: Interested vendors must respond to this tender using the UNOPS eSourcing system, via the UNGM portal. In order to access the full UNOPS tender details, request clarifications on the tender, and submit a vendor response to a tender using the system, vendors need to be registered as a UNOPS vendor at the UNGM portal and be logged into UNGM. For guidance on how to register on UNGM and submit responses to UNOPS tenders in the UNOPS eSourcing system, please refer to the user guide and other resources available at: https://esourcing.unops.org/#/Help/GuidesTender for the provision of Dental Laboratory Services/Prostheses
Dublin Dental Hospital BoardDublinThe DDUH invites tenders for the manufacture and supply of dental prosthesis and appliances as required on a draw down basis to support in house dental production laboratory activity. The following table summarises the annual outsourced production in 2023 and 2024 for selected product lines.Provision of IT and Electrical Works at the new DEB UNICEF Office (for Gaza local suppliers only)
UNICEFIndiaDeadline: Sep 09Provision of IT and Electrical Works at the new DEB UNICEF OfficeInvitation to Tender for Building (Mechanical and Electrical) Consultancy Services for an Emergency Works Project for the replacement of the gas systems including entire pipework, gas cocks and suppli
Kildare and Wicklow Education and Training BoardNaasDeadline: Sep 20On behalf of the Kildare and Wicklow Education and Training Board (the Contracting Authority for this project), you are hereby invited to tender for Mechanical and Electrical Consultancy Services for the above. The project consists of the replacement of the gas systems including entire pipework, gas cocks and supplies to fume cupboards in science labs at Confey College, Leixlip, Co. Kildare. Please see Emergency Works Report attached for further information.Roofing with Mechanical and Electrical Services upgrade works to existing North Building of Dundalk Institute of Technology
Dundalk Institute of Technology_1155DUNDALKThe existing roof covering membranes to the North Building are reaching the end of their economic life and require replacement. Some areas of the existing roof have insufficient thermal properties due to the absence of insulation and as part of the roofing upgrade works it is proposed to upgrade the thermal properties of the existing structure through the installation of an insulation layer below the new roofing membrane. In addition, the existing M and E Services infrastructure is in need of upgrading and bringing up to modern standards. The scope of works will also includes the installation of roof membrane/flashing to up-stands/parapets to the roof and refurbishment and replacement of existing rainwater goods as necessary. The removal of existing Asbestos containing materials as identified in Asbestos Survey Report including certified removal and disposal of identified materials or any other materials identified during course of works. The removal of both existing roof lights and removal of existing water tank rooms and the reinstatement of the roof structure and coverings to these areas and introduction of new AOV's above stair cores along with the replacement of a number of existing roof lights. Creation of new window opes in existing lecture rooms and provision of windows to same. Works to an existing Plant Room to accommodate larger water tank/ pumps including upgrade of existing structure and enclosure and the boilers in the existing boiler house are to be replaced along with the requirement to insulate the floor in plant area, also installation of new Air Source Heat Pump equipment to augment and replace existing boiler plant. Removal and disposal of obsolete plant along with removal and re installation of other plant and ducting to accommodate the roof works will be required and involve electrical works. M and E works required to all areas and to allow the removal of water tank enclosures including new water pipework distribution network in first floor ceiPrequalification for Architectural, Engineering and Works Management Services for the Redevelopment of the Adriatico Science Complex, Trieste, Italy
ICTPItalyDeadline: Sep 30The Abdus Salam International Centre for Theoretical Physics (ICTP) invites qualified national and international architectural and engineering firms, including eligible joint ventures and consortia, to apply for prequalification for the provision of architectural, engineering and works management services for the redevelopment of the Adriatico Science Complex at 9 Via Grignano, Trieste, Italy. The assignment may include preliminary design, executive design, permitting support, multidisciplinary coordination and works management, including the role of Director of Works. Applications will first be reviewed against the minimum eligibility and qualification requirements on a pass/fail basis. Compliant applications will then be scored and ranked. At least five of the highest-ranked prequalified applicants are expected to be invited to participate in a subsequent restricted Request for Proposal. Interested applicants may request a Project Information Presentation containing additional background and technical information on the Adriatico Science Complex. Applicants intending to submit an application may also request editable versions of the application forms by contacting [email protected] and quoting reference 26-13-EOI-AGH-RENO. Requests for clarification must be submitted exclusively to [email protected] by 7 September 2026. Complete prequalification applications must be submitted exclusively by secure email to [email protected] no later than 30 September 2026 at 15:00, local time in Trieste, Italy (CEST, UTC+02:00). The complete requirements, qualification criteria and submission instructions are set out in the attached Expression of Interest / Prequalification document.CfT for the Provision of Laboratory Services including Sampling and Analysis of Samples and reporting of Results of Drinking Water for Private Drinking Water for Cavan County Council
Cavan County CouncilCavanTEN2600017 - CfT for the Provision of Laboratory Services including Sampling and Analysis of Samples and reporting of Results of Drinking Water for Private Drinking Water for Cavan County Council. Please refer to Tender Documents for further details.265 Provision of services for configuration of AWS-based solutions for the VRU
UNDPJordanDeadline: Sep 07Dear Bidder,The United Nations Development Programme (UNDP) hereby invites you to submit your Proposal to the Request for Proposal UNDP-UKR-01799: Provision of services for configuration, subscription access, and operational support of AWS-based solutions for the Verkhovna Rada of Ukraine.Interested suppliers must submit their proposal directly in the system as instructed in the solicitation document, following the instructions in the available user guide. In case you have never registered before, you can register a profile using the registration link shared via the procurement notice and following the instructions in guides available in the UNDP website: https://www.undp.org/procurement/resources-suppliers. Do not create a new profile if you already have one. Use the forgotten password feature in case you do not remember the password or the username from previous registration.All the bidders are strongly encouraged to initiate the supplier registration in Quantum system at least five (5) days before the tender deadline.Search for the specific tender using search filters and subscribe to the tender in order to get notifications in case of amendments of the tender document. If you need support with the online system, you can contact the contact details of this tender as indicated in the solicitation document.The Pre-Proposal Conference with interested proposers will be held on August 28, 2026 at 11:00 (Kyiv time) via Zoom. Interested bidders are required to register for the Pre-Proposal Conference by providing the following information (Name, Title, Company Name, Email Address of Attendee) through the Quantum messaging functionality or to the email address below: E-mail: [email protected]: Procurement UnitSubject: UNDP-UKR-01799 – Pre-Proposal Conference Registration Meeting details with Zoom link will be provided directly to those who expressed interest to participate by accepting invitation and requested by email.Additional information: - Proposers are strongly advised to go through additional materials on using Quantum supplier portal. Guide for UNDP suppliers using Oracle Supplier Portal for online eTendering posted here: Resources for bidders | United Nations Development Programme (undp.org) - If you need support with the online system, you can contact [email protected]. Please always indicate the tender reference number in the subject line/email. - Proposers must send their inquiries and requests for clarifications related to Terms of Reference / Specification / Other bidding documents using the messaging functionality in the Quantum portal. - Documents can be submitted in English or Ukrainian languages. In case of submission in Ukrainian language, proposers may be requested for provision of English translation of separate parts of the bid or bid as a whole.ATTENTION: Proposal shall be submitted only through Quantum Supplier Portal for online eTendering. Proposals shall not be submitted to any email addresses. Otherwise, such proposals shall be disqualified.************************************Localized guide for Supplier profile registration Quantum Supplier registration brief manual UA v.6.pdf (undp.org) (UA)Localized guide for UNDP suppliers using the Quantum portal: PowerPoint Presentation (undp.org) (UA)Global guide for UNDP suppliers using the Quantum portal: PowerPoint Presentation (undp.org) (EN) United Nations Development Programme (UNDP)Procurement Unit
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 04. September 2026.
- Who is the contracting authority?
- The contracting authority is WHO.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.