Aalborg UniversitetAalborg ØstTED
Laboratory precision cutting machine intended for sectioning glass specimens and other hard and brittle materials for research and development use
The Contracting Authority puts out to Tender the purchase of laboratory precision cutting machine intended for sectioning glass specimens and other hard and brittle materials for research and development use. The equipment must be suitable for reproducible, low-damage cutting and shall include motorized feed control, motorized blade heigh...
Type: Tender
Tools, Laboratory Instruments
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Aalborg Universitet
- Published:
- June 07, 2026
- Deadline:
- Not specified
- Topic:
- Tools
Tender description
Show full descriptionCollapse description
The Contracting Authority puts out to Tender the purchase of laboratory precision cutting machine intended for sectioning glass specimens and other hard and brittle materials for research and development use. The equipment must be suitable for reproducible, low-damage cutting and shall include motorized feed control, motorized blade height adjustment, motorized serial sectioning, digital control of cutting parameters, a recirculating coolant system, support for diamond cut-off wheels suitable for hard and brittle materials, a blade diameter range starting around 75 mm and extending to at least 200 mm, variable blade speed of at least 300-5,000 rpm, a controlled feed rate suitable for precision cutting within a range of at least 0.3 to 180 mm/min, automated parallel serial sectioning with a minimum movement range of 40 mm, visual alignment assistance such as a laser or equivalent, and compatibility with 200-240 V, 50/60 Hz power. The complete system must be delivered to Aalborg University no later than September 1st 2026.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
6 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock1 detail capturedLots LOT-0000
Procedure data
Unlock6 details capturedPublication number · Procedure reference · Buyer reference · Procedure type · +2 more
Performance locations
Unlock2 details capturedPerformance locations
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
10Thin section lapping and polishing equipment and thin section/sample saw (call for tenders no. 2)
Geologian tutkimuskeskusEspooA bid is requested for one (1) thin section lapping and polishing equipment and/or for one (1) thin section/sample saw. Thin section lapping and polishing equipment: The thin section lapping and polishing equipment must be capable of producing polished thin sections, thin sections with surface glass, polished sections, and glued sections made from crushed material. GTK usually uses hot plate and oven impregnating with Araldite and Petropoxy adhesives for the production of thin sections. GTK uses a mineral and polarization microscope and a micrometer to inspect the quality and thickness of the grains. GTK produces thin sections from soft rock (shale) to very hard rock types (granite), as well as glued sections from crushed stone. As a general rule, the rock types in Finland are hard. GTK has an external Pfeiffer HiScroll 46 vacuum pump for the use of thin section lapping and polishing equipment so the vacuum pump is not within the scope of this invitation to tender. The most produced sections at GTK are as follows: Polished thin section and section with surface glass, size 48 mm x 28 mm, other sizes are also possible Polished section, size varies, normally sample is round, and the size is 25 mm x 30 mm. Glued gravel section, size varies, normally sample is round, and the size is 25 mm x 30 mm. The thickness of the polished thin section must normally be 0.03 mm, uniform in thickness, and the minerals must have the correct optical color for identification. The surface of the polished thin section must be scratch-free. and/or Thin section/sample saw: Thin section/sample saw is used for sawing bulk rock samples for thin section production. The size of rock samples varies from few cm up to 20 cm in thickness. The saw must be capable of cutting samples with a diameter of at least 10 cm and thin sections sized up to 50 mm x 75 mm. GTK has an external Pfeiffer HiScroll 46 vacuum pump for the use of thin section/sample saw so the vacuum pump is not within the scope of this invitation to tender. Delivery terms & warranty for both devices: Delivery term: DDP Geological Survey of Finland, Thin section laboratory, Kuopio, Finland. Incoterms 2020. Delivery at the latest by October 30, 2026. At least a two-year warranty from the acceptance of the equipment.The Supply, Delivery and Installation of 7 Manually Operated Centre Lathe Machine Tools to TUS
Technological University of the Shannon: Midlands Midwest (TUSMM)LimerickTenders are sought for the supply, delivery, and installation of 7 manually operated centre lathe machine tools to TUS for use in the Engineering Workshop. The lathes must be of solid construction, vibration-free, and provide accurate cutting for turning, facing, drilling, and threading operations. They should be of industrial standard, typical for machine builders, medical device, pharmaceutical, automotive, aerospace, and general engineering industries.Provision of Robotics Equipment and Related Items to City of Dublin ETB Centres
City of Dublin Education and Training BoardDublinDeadline: Aug 04The Contracting Authority wishes to establish a multi party framework agreement to meet its requirements for the supply of equipment for the Robotics skills education and training in City of Dublin ETB Training Centres. City of Dublin FET College is developing capacity to integrate skills training in robotics in a wide range of education and training courses including and not limited to delivery of Micro qualifications addressing skills gaps in the manufacturing industry, Pre-Engineering courses, Computer networking and computer software courses. The equipment is critical to the provision of industry focused advanced manufacturing and technology training provision and business supports to the manufacturing and technology growth sectors in Ireland.Prior Information Notice – RF On-Wafer Probe Station
Ferdinand-Braun-Institut gGmbH, Leibniz-Institut für HöchstfrequenztechnikBerlinDeadline: Jul 12The Ferdinand-Braun-Institut (FBH) plans to procure an automated RF on-wafer probing system within the framework of the EU-funded APECS programme. The system will be used for electrical characterisation of semiconductor devices, circuits and demonstrators at wafer level. It is intended to enable high-frequency and mmWave measurements under controlled and reproducible conditions. The equipment shall support automated probing of wafers up to 200 mm in diameter and provide a versatile platform for a wide range of RF measurements. It will be installed in a cleanroom environment and integrated into existing measurement and process workflows. The procurement procedure is planned for 2026.Procurement of workshop machines for the new Mosjøen high school
Nordland fylkeskommuneBODØDeadline: Jul 24Nordland county is in the process of constructing a new sixth form college in Mosjøen, which shall be in use autumn 2027. The tender structure includes technology and industrial disciplines. In connection with this, some new equipment shall be procured for the department. Consto AS is the turnkey contractor in the project and is responsible for connecting the machines to water/sewage and electricity networks when a fixed installation is required. The tenderer will be subject to Consto AS ́s HSE regime at the construction site. The delivery and assembly of machines and equipment at the construction site is expected to be December 2026. Nordland county invites tenderers to submit tenders for 3+1 lathes, 2 milling machines and 4 column drilling machines, 2 strip grinding machines, 1 band saw.Call for Tender for Supply, Delivery, Training and Maintenance of a Bound Metal and Continuous Fibre Fused Filament Fabrication (FFF) Machine Package to MTU Cork
Munster Technological University.TraleeDeadline: Jul 16Munster Technological University seeks tenders for the supply, delivery, training, and maintenance of one Bound Metal Filament Fused Filament Fabrication (FFF) machine with all necessary post-processing equipment to produce complete components. Further details in the RFT document.Workshop equipment for Buslanlegg Ski
Sporveien Bussanlegg ASOsloSporveien Bussanlegg AS hereby invites tenderers to apply to be qualified for a competition with negotiations on workshop equipment for ski bus facilities.Lieferung und Inbetriebnahme einer Rollenfräse für profilierte Heberwalzen
Oesterreichische Banknoten- und Sicherheitsdruck GmbHWienLieferung und Inbetriebnahme einer Rollenfräse für profilierte HeberwalzenCNC-Laseranlage
Forschungszentrum Jülich GmbH -Team Infrastruktur-JülichDeadline: Jul 27Auftraggebers, den Auftrag ohne vorherige Veröffentlichung einer Bekanntmachung im Amtsblatt der Europäischen Union zu vergeben, und den Namen und die Kontaktdaten des Unternehmens, das den Zuschlag erhalten soll, umfassen. Organização que fornece mais informações sobre os procedimentos de recurso: Forschungszentrum Jülich GmbH -Team Infrastruktur- - Vergabekammer des BundesBeschaffung eines kompakten CO2-Lasergravier- und Schneidsystems - WIRO Wohnen in Rostock Wohnungsgesellschaft mbH - PL
WIRO Wohnen in Rostock Wohnungsgesellschaft mbHRostockDeadline: Jul 23Beschaffung eines kompakten CO2-Lasergravier- und Schneidsystems
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- No specific submission deadline is currently stated for this notice.
- Who is the contracting authority?
- The contracting authority is Aalborg Universitet.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.