Education Procurement Service (EPS)LimerickTED
LA3247C - TUS - RFT for the Supply, Delivery, Installation, Calibration and Commissioning of Laboratory Equipment for Complete Circular Bioprocessing and Biorefinery Plant Comprising of Five (5) Lots
TUS (Technological University of the Shannon) seeks supply, delivery, installation, calibration, and commissioning of laboratory equipment for a complete circular bioprocessing and biorefinery plant in five lots: Lot 1: one pressurized high-shear jacketed hydrolysis reactor; Lot 2: photobioreactor system (two 5L, one 25L, one 250L); Lot 3...
Type: Tender
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Education Procurement Service (EPS)
- Published:
- May 10, 2026
- Deadline:
- Not specified
Tender description
TUS (Technological University of the Shannon) seeks supply, delivery, installation, calibration, and commissioning of laboratory equipment for a complete circular bioprocessing and biorefinery plant in five lots: Lot 1: one pressurized high-shear jacketed hydrolysis reactor; Lot 2: photobioreactor system (two 5L, one 25L, one 250L); Lot 3: UHPLC with fraction collection, UV-Vis, RI, and ELCD detectors; Lot 4: GC-MSD with liquid/headspace injector, SPME, and pyrolysis attachments; Lot 5: spray dryer with encapsulator and dehumidifier. Equipment to be installed at TUS Moylish Campus, CircAB lab.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
7 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock49 details capturedDocuments
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock5 details capturedLots LOT-0001 · Lots LOT-0002 · Lots LOT-0004 · Lots LOT-0003 · +1 more
Procedure data
Unlock5 details capturedPublication number · Procedure reference · Procedure type · Contract type · +1 more
Performance locations
Unlock2 details capturedPerformance locations
Bidders and contractors
Unlock12 details capturedBidders and contractors · Address · Contact
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
9Request for Tenders for the Supply of Laboratory Equipment for the STEM Building on the TUS Midlands Campus to include Supply, Delivery, Installation, Commissioning, Training, Warranty and Support
Technological University of the Shannon: Midlands Midwest (TUSMM)LimerickSupply, delivery, installation, commissioning, training, warranty and support of laboratory equipment for TUS Midlands STEM Building. Divided into 7 lots: LOT 1 Autoclaves (330-380L); LOT 2 Multimode Microplate Readers; LOT 3 HPLCs; LOT 4 UV-VIS Spectrophotometer; LOT 5 Advanced Multimode Microplate Reader; LOT 6 ICP-OES System; LOT 7 Thermogravimetric Analyser. Tenderers may apply for one, some, or all lots.LA3190C - RFT for the Supply, Delivery, Installation and Validation of Laboratory Equipment comprising of two (2) Lots for University College Cork (UCC)
Education Procurement Service (EPS)LimerickUniversity College Cork request the supply of an argon recirculating glovebox with integrated deposition tools (Lot 1). The glovebox which will be capable of processing lithium-based battery materials and will integrate materials deposition capability utilizing RF sputtering and evaporation for synthesis and multi-parametric test of liquid, polymer and solid-state systems for energy devices. The equipment will be used for liquid, polymer and all solid-state stacks of energy devices to be fabricated with the interface control giving enhanced energy and power density and device lifetimes. In particular, the RF sputter tool will enable true solid state electrolyte deposition. This integrated research tool will enable analysis of the key role of the interface in the achievement of next generation active materials and electrolyte interactions. The integrated deposition tools will be capable of sequential layer deposition. Compatibility with and ability to process potential future batteries based on more sustainable materials such as sodium and iron will also require such a capability. The deposition suite will also permit advances focussed on integrated magnetic devices including CoFe and CoFeN alloys materials and multilayer films. The integrated system will include ALD processing capability of the Plasma enhanced Atomic Layer Deposition (ALD) Tool (Lot 2) as interface engineering and control are key to the development of the tailored energy materials for electrode and electrolyte enhancement in batteries, supercapacitors and PV devicesThe Supply, Delivery, Installation and Commissioning of Science Equipment in 6 Lots
Cork Education and Training BoardCorkDeadline: Jun 12Cork Education and Training Board seeks a multi-party framework agreement for supply, delivery, installation, and commissioning of science equipment in six lots via a competitive process.LA3692C - DCU - CFT Supply, Delivery, Installation, Commissioning and Calibration of a RF, THz and Optical Test and Measurement Equipment [8 Lots]
Education Procurement Service (EPS)LimerickDeadline: Jun 12Dublin City University (DCU) requests supply, delivery, installation, commissioning and calibration of RF, THz and Optical Test and Measurement Equipment (8 lots) for testing RF, sub-THz, and optical communications systems. Equipment includes transmitters, receivers, sources, and signal characterisation facilities. Lot 1: Distributed SDR Nodes and Wideband SDR Platform; Lot 2: Optical IM/DD Reference Transceiver; Lot 3: Optical Multi-Format Coherent Transmitter; Lot 4: Optical Coherent Receiver; Lot 5: Electrical Pattern Generator and Bit Error Rate Test Set; Lot 6: Ultra-stable Optical Frequency Comb; Lot 7: RF Phase Noise and Signal Analyser; Lot 8: THz Transceiver (Up/Down Conversion).LA3319C - MTU - CFT - Open Procedure for the Supply, Delivery, Installation and Commissioning of Analytical Systems [2 Lots]
Education Procurement Service (EPS)LimerickMTU - Munster Technological University request the supply, delivery, installation and commissioning of two (2) lots: Lot 1 - Energy Dispersive X-ray Fluorescence System (EDXRF Analyser) One (1) x EDXRF Analyser to deliver routine elemental measurements across a diverse range of matrices from low viscosity liquids to solids, metals, slurries, powders, pastes and thin films. Must be flexible and easy to use and appropriate for research, industrial and environmental monitoring applications. Must be suitable for both technical and non-technical operators. The instrument should be capable of conducting, with high precision and accuracy, quantitative, qualitative and semi-quantitative (standardless) analysis from sub-ppm level to one hundred percentage. Lot 2 - Biodegradation Test System One (1) x Biodegradation Test System for analysing the degradation of plastics, composting process, microbial activity studies, soil respiration rate, soil health, microbial respiration, etc along with the ability to control environmental conditions and measure gases to calculate biodegradation rates. Must be compliant with international norms such as ISO 14855 with options for different volume sample vessels and numbers.Supply and Installation of Mechanical and Electrical Equipment for Iznik Wastewater Treatment Plant (WWTP) Capacity Increase
City of Belgrade, Secretariat for Communal and Housing affairs / Belgrade Land Development Public Agency (Beoland)BelgradeDeadline: Jun 25This contract will include: 1 lot of Mechanical and Electrical Equipment Supply and Installation. The scope of work includes the supply and installation of high capacity wastewater treatment equipment such as 28 submerged membrane modules, a package type pretreatment unit (250 m³/h), a centrifugal decanter, a magnetic bearing turbo blower, and a polymer preparation unit (4,000 L/h, 3chamber, stainless steel), among others.RFT for the Supply, Delivery, Installation, Commissioning and Calibration of Isothermal Titration Calorimeter (ITC) for Protein Complexes for Trinity College Dublin
Education Procurement Service (EPS)LimerickTrinity College Dublin require the supply of Isothermal Titration Calorimeter (ITC) for protein complexes for the deliverables of a Research Ireland grant. The calorimeter is required for measuring micro-calories of heat evolved or absorbed from protein-protein and protein-small molecule interactions in aqueous solution. The measurement involves multiple injections of ligand (protein, other macromolecules, small molecules) into a cell containing another protein, small molecule, or other macromolecules. The titration is performed under isothermal conditions using a reference cell containing water or related aqueous solution that is similar to the experimental cell. Changes in temperature between the two cells during injections are rapidly equilibrated using active power compensation that is calibrated for calories of heat. The properties of the isothermal titration calorimeter should include the following: (1) The tenderer SHOULD provide a new or recent state-of the-art (ex-demo) model ITC calorimeter, and if ex-demo, it should be minimally used. Volume of experimental and reference cells should be approximately 200 mico-Liters. (2) Typical concentration ranges for analyses should ideally be in the range from 1 micro-Molar to 100 micro-Molar for macromolecules (typically proteins) in the cell, and 10 micro-Molar to 1M concentrations in the injections syringe for the ligand. (3) Preferred temperature range for isothermal titrations from 4 deg Celsius to 60 deg Celsius. (4) software that can analyse data and determine the Kd (dissociation constant), enthalpy, and entropy from analyses of the titrations. (5) Software should handle simple 1:1 binding models, with the possibility to analyse more complex interactions, such as multiple binding sites, sequential interactions. The capability to analyse complex binding with rigor would be a major advantage, as many interactions are not simple 1:1. (6) minimal generation of bubbles or artefactual heat, which may arise from high concentrations of viscous protein in cell (7) Ideally - prefer system/software compatibility with .opj files generated by Origin 7 (or later) software, since we have nearly 20 years of previous data collections. This could be transferred to new control computer for continuity. (8) New computer, drivers, and accessories required to run the calorimeter software.Request-for-Tenders for the Supply, Delivery, Installation, Commissioning and Calibration of a Semi-Portable Benchtop Nuclear Magnetic Resonance (NMR) Imaging Profiler Instrument for TUS
Technological University of the Shannon: Midlands Midwest (TUSMM)LimerickSupply, delivery, installation, commissioning and calibration of a semi-portable benchtop Nuclear Magnetic Resonance (NMR) Imaging Profiler instrument for unambiguous structural identification of pharmaceutical chemicals. Funded by Enterprise Ireland for polymer coating applications and MR physics. Used for teaching (undergrad Levels 6-8, MSc) and research (MSc/PhD) in material analysis. MRI system must be a research console driver interface with educational software.Supply of a Recovery Station (Wash Line) including delivery, installation, commissioning, training and warranty to the TUS
Technological University of the Shannon: Midlands Midwest (TUSMM)LimerickThe supply, delivery, installation, and commissioning of a plastic waste washing line to TUS Midlands campus, Athlone. The proposed system must be designed for laboratory-to-pilot scale operation and suitable for the effective cleaning of post-consumer and post-industrial plastic materials.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- No specific submission deadline is currently stated for this notice.
- Who is the contracting authority?
- The contracting authority is Education Procurement Service (EPS).
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.