Lunds universitetLundTED
In-situ temperature measurement and control equipment
In-situ temperature measurement and control equipment to be used with metal organic vapour phase epitaxy (MOVPE).
Submission deadline: August 24, 2026 (expired)Type: Tender
Measurement Technology, Process Technology
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Lunds universitet
- Published:
- July 27, 2026
- Deadline:
- August 24, 2026
- Topic:
- Measurement Technology
Tender description
In-situ temperature measurement and control equipment to be used with metal organic vapour phase epitaxy (MOVPE).
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
6 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock1 detail capturedLots LOT-0001
Procedure data
Unlock6 details capturedPublication number · Procedure reference · Buyer reference · Procedure type · +2 more
Performance locations
Unlock3 details capturedPerformance locations
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
8Multifuntion Reprogrammable Control-, Measurement and Signal Processing Instrument
IOFDeadline: Jul 28Multifuntion Reprogrammable Control-, Measurement and Signal Processing Instrument Multifuntion Reprogrammable Control-, Measurement and Signal Processing InstrumentNano-indenter for dynamic nanoscale testing including continuous stiffness measurements, in-situ scanning probe microscopy, and high-speed mechanical microscopy
European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsThe nanoindentation system shall support the investigation of ion radiation induced damage and other degradation in metals, ceramics, claddings, protective coatings and thin films. The system shall enable high resolution nanoindentation using both quasi static and dynamic measurement techniques, in-situ scanning probe microscopy, and high-speed mechanical property mapping (i.e., mechanical microscopy), thereby allowing precise probing of damage gradients and other microstructural features.Installation and Support of Air Traffic Control Simulation Equipment at Casement Aerodrome
Irish Defence ForcesNewbridgeDeadline: Sep 11Installation and Support of Air Traffic Control Simulation Equipment at Casement AerodromeSupply and Delivery of Professional Diving Equipment and Suits, Hand-held Metal Detectors, Personal Protection Equipment and Helmets with Visors
OSCEKosovoDeadline: Sep 23Submission deadline: 23 September 2026 at 12:00 EEST, Kyiv time (11:00 Vienna time) The OSCE Support Programme for Ukraine is implementing project “SPU-Support to Environmental Rehabilitation with focus on Building National Humanitarian Mine Action Capacities of Ukraine”. Within above activities the purchasing of professional diving equipment and suits, compressors, hand-held metal detectors, personal protection equipment and helmets with visors for humanitarian demining activities including underwater demining is envisaged for: immediate one-off purchase requirements; for possible future project needs including other OSCE projects. All the equipment shall be provided according to the provided technical specifications and requirements. Bids submitted as separate complete LOTs are accepted. Bidder can bid for one or more LOTs. Bids are not accepted for partial compliance to any LOT. Bids shall be submitted as the following complete LOTs: LOT 1.1/2.1 - Supply and Delivery of Personal Diving Equipment; LOT 1.2/2.2 - Supply and Delivery of Diving Suits; LOT 1.3/2.3 - Supply and Delivery of Compressors; LOT 1.4/2.4 - Supply and Delivery of Hand-held Metal Detectors and Underwater Hand-held Metal Detectors; LOT 1.5/2.5 - Supply and Delivery of Personal Protective Equipment; LOT 1.6/2.6 - Supply and Delivery of Helmets with Visors. Evaluation and award will be made separately for each LOT. For possible future needs under long-term arrangements, it is intended to conclude the contract(s) for a period of three (3) years, with the possibility of two additional one-year extensions up to five (5) years.Turnkey Filtered Rayleigh Scattering (FRS) System for the combined measurement of pressure, temperature and three-component velocity field in gaseous flows
Aarhus UniversitetAarhus CAarhus University intends to award a contract without prior publication pursuant to section 80(3)(2) and section 80(4) of the Danish Public Procurement Act, cf. Article 32(2)(b)(ii) of Directive 2014/24/EU, on the basis that the required supplies and services can only be provided by one particular economic operator due to an absence of competition for technical reasons. Aarhus University has assessed that no reasonable alternative or substitute exists, and that the absence of competition is not the result of an artificial narrowing of the parameters of the procurement. The intended contract concerns the delivery of a complete turnkey Filtered Rayleigh Scattering (FRS) system for laser-based diagnostics in gaseous flows. The system is required for quantitative planar measurements of pressure, temperature and three-component velocity information in a measurement region of up to 100 mm × 100 mm. The required system must comprise, as one integrated measurement chain, a frequency-tunable narrow-linewidth laser source at approximately 532 nm, high-precision wavelength measurement and stabilisation, iodine-based molecular filtering, beam delivery and light-sheet optics, multi-perspective imaging from nine viewing directions, perspective calibration, control and data acquisition functionality, installation, commissioning, documentation, training and acceptance testing. The decisive requirement is not the supply of individual optical, laser, imaging or software components, but the delivery of a complete and operational FRS measurement system where one supplier assumes responsibility for the integration, calibration, commissioning and verified performance of the complete measurement chain. FRS measurements depend on the combined and synchronised performance of laser frequency control, molecular filter transmission, optical alignment, light-sheet formation, imaging geometry, calibration and data acquisition. These elements are technically interdependent and jointly determine whether the system can produce usable calibrated data for pressure, temperature and three-component velocity evaluation. In Aarhus University’s assessment, procuring individual components from several suppliers would not constitute a reasonable alternative or substitute, as it would not provide a supplier with overall responsibility for the integration, calibration, commissioning and verified performance of the required operational FRS functionality. Based on Aarhus University’s technical and market assessment, ILA R&D GmbH is the only economic operator identified as capable of delivering the required complete turnkey FRS system and assuming responsibility for its overall functionality. Other suppliers considered may be able to provide individual components or related optical flow-diagnostic systems, such as lasers, wavelength meters, cameras, optical components, PIV/PTV, LDV, LIF, BOS, Rayleigh/scalar imaging or software interfaces. However, Aarhus University has not identified a reasonable alternative or substitute capable of delivering the specific integrated FRS solution required, including iodine-filtered FRS, frequency-scanning and single-frequency operation, nine-perspective imaging, perspective calibration and acceptance testing of the complete system. Aarhus University therefore considers that the intended direct award is justified by the absence of competition for technical reasons. The absence of competition results from the technical requirements of the intended FRS measurement concept and the need for one supplier to deliver and take responsibility for the complete integrated system, and not from an artificial narrowing of the parameters of the procurement.Framework agreement for the procurement and installation of equipment connected to the existing Lenel OnGuardS2 access control system.
Bodø KommuneBODØDeadline: Aug 26The aim of this procurement is to enter into parallel framework agreements for the delivery of software, equipment, as well as maintenance and assistance services for the municipality ́s access control system (in this document referred to as AAK). The contracts are for expansions and changes to the existing Lenel OnGuradS2 system and tenderers must therefore have access to equipment, have Lenel OnGuradS2 certified technicians as well as be certified VAR (Value Added Reseller). Bodø municipality shall always have a robust, flexible, well-functioning and future oriented access control system.External inspections and control of participants in the power industry and affected parties.
Norges vassdrags- og energidirektorat (NVE)OSLODeadline: Aug 24The framework agreement shall ensure the Regulation Authority for Energy (RME) access to consultancy services in connection with inspections and control of participants in the power industry and involved parties. The framework agreement will primarily be used for inspections and controls of the schemes for electricity subsidy and the Norgespris. The framework agreement is not limited to these schemes and it will also be able to cover similar assignments within concurrent thematics, including inspections and controls that are within RME ́s authority. The framework agreement can also include minor assignments where the contractor provides RME assistance with the execution of individual assignments within similar inspection and control processes, for example assistance with data acquisition, data review and analyses. The agreement period for the framework agreement is two years, with an possibility for an extension on verbatim terms for 1+1 year, so that the maximum duration of the agreement period is four years from signing of the contract.EU space Data (Galileo and Copernicus) Integration to support fisheries control
European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsDeadline: Sep 18This procurment implements a Pilot Project.The pilot project will define minimum technical, operational and regulatory requirements for the integration of EU Space data (Galileo and Copernicus) to support fisheries control. Currently there are no standards and no regulations for the use of GNSS (e.g. Galileo authentication) and Copernicus services (SAR and optical images) to be used for law enforcement. The project will contribute to the work of European Committees for drawing up standards in the field of fisheries control.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 24. August 2026.
- Who is the contracting authority?
- The contracting authority is Lunds universitet.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.