European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsTED
Nano-indenter for dynamic nanoscale testing including continuous stiffness measurements, in-situ scanning probe microscopy, and high-speed mechanical microscopy
The nanoindentation system shall support the investigation of ion radiation induced damage and other degradation in metals, ceramics, claddings, protective coatings and thin films. The system shall enable high resolution nanoindentation using both quasi static and dynamic measurement techniques, in-situ scanning probe microscopy, and high...
Type: Tender
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEs
- Published:
- August 18, 2026
- Deadline:
- Not specified
Tender description
The nanoindentation system shall support the investigation of ion radiation induced damage and other degradation in metals, ceramics, claddings, protective coatings and thin films. The system shall enable high resolution nanoindentation using both quasi static and dynamic measurement techniques, in-situ scanning probe microscopy, and high-speed mechanical property mapping (i.e., mechanical microscopy), thereby allowing precise probing of damage gradients and other microstructural features.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
7 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock6 details capturedBuyer · Address · Contact
Lots
Unlock1 detail capturedLots LOT-0001
Procedure data
Unlock6 details capturedPublication number · Procedure reference · Buyer reference · Procedure type · +2 more
Performance locations
Unlock2 details capturedPerformance locations
Bidders and contractors
Unlock3 details capturedBidders and contractors · Address · Contact
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
10elektrooptische Kristalle
Friedrich-Schiller-Universität JenaJenaDie Friedrich-Schiller-Universität Jena beabsichtigt für Forschungszwecke mehrere schnelle, verlustarme elektrooptische Kristalle mit integrierten Treibern für den Einsatz mit gequetschtem Licht (squeezed Light) für Forschung und Lehre anzuschaffen. Folgende Spezifikationen/Eigenschaften müssen mindestens erfüllt werden: siehe Anlage 2.Eine automatisierte Hochdurchsatz-Plattform für Whole-Slide-Imaging
EPFL-Scientific EquipmentLausanneDeadline: Sep 08Die EPFL beabsichtigt, eine automatisierte Hochdurchsatz-Plattform fuer Whole-Slide-Imaging fuer das Labor UPCOURTINE (NeuroRestore), Fakultaet fuer Lebenswissenschaften (SV), am Campus Biotech Genf zu erwerben. Das System wird der quantitativen digitalen Histologie, der multiplexen Fluoreszenzmikroskopie, der raeumlichen Biologie und der grossskaligen Gewebeanalyse in den Bereichen Neurowissenschaften, regenerative Medizin, Krebsbiologie und verwandte biomedizinische Forschung dienen. Die Ausruestung muss automatisiertes Hellfeld- und Fluoreszenzscanning grosser Objekttraegerchargen, reproduzierbare Whole-Slide-Digitalisierung, Mehrkanalbildgebung, hochaufloesende Erfassung, robustes Stitching, Datenexport und eine benutzerfreundliche Bedienung durch geschulte Forschende ermoeglichen. Varianten sind zugelassen, sofern sie gleichwertige oder bessere Leistungen bieten und alle nachstehend beschriebenen obligatorischen funktionalen Anforderungen erfuellen.Equipment for weekend sequencing for the Department of Medical Genetics at UNN HF Tromsø.
SYKEHUSINNKJØP HFVADSØThe Medical Genetics Department at the University Hospital of North Norway (UNN) intends to procure 1 sequentialator from PacBio to read long fragments of long-read sequencing (DNA and RNA sequencing). The instruments shall be used for diagnostics and shall replace and supplement the current diagnostics based on short-read sequencing (SRS). This is because LRS detects some types of genetic variation better than SRS, e.g. major structural deviations and methylation status. Method transfer shall therefore be carried out from the current SRS to a new LRS for selected medical indications and it is therefore very important that these sequentators deliver a sequence of very high quality and reproducibility. There are several technical specifications that are decisive for achieving the quality we need for this purpose, for example: - The sequencing must be able to carry out sequencing with long read lengths of DNA and RNA for clinical samples. The read length of sequential fragments must at least be median 10-15 kb. At least 90% of the bases must have a quality of Q30 or higher in a typical 30X human genome. The instrument shall be particularly suitable for detecting major structural deviations and methylation status. - The data quality of SNP variants and short parts <50 bp must be at least as good as that achieved by Illumina SRS. This is important so that the analytical sensitivity of the analysis offer is not reduced for these types of variants and that the quality of the analysis offer is not, therefore, impaired for the patient analyses that shall only be carried out on a new long-read sequentator. - Sensitivity and precision must be documented in a reference dataset for the entire genome (i.e. not just the encoded areas in the genome) with the following parameters met: (i) F1 score > 99 % for SNS. (ii) F1 score > 95 % for INDEL's. (iii) F1 score >90 % for structural variants (SV's). (iv) Recall or F1-score for SNVs and INDEL are for technically challengiPipettierroboter
AGES - Österreichische Agentur für Gesundheit und Ernährungssicherheit GmbHWienGegenstand der Ausschreibung ist die Lieferung, Montage, Installation und Inbetriebnahme eines fabrikneuen NGS Library Preparation Pipettierroboters der neuesten Generation.DFG-Az.: SFB 1277/4 C05 (A 178) Lieferung eines Cryogenic Device-Chip Probers
Deutsche Forschungsgemeinschaft e.V.BonnDeadline: Aug 14Lieferung eines Gerätesystems gem. beigefügter Leistungsbeschreibung. DFG-Az.: SFB 1277/4 C05 (A 178) Lieferung eines Cryogenic Device-Chip ProbersBeschaffung Ramam microscope
Max-Planck-Institut für Intelligente SystemeStuttgartDeadline: Sep 01Bietercockpit“. Die Nutzung dieser Software ist Gegenstand einer gesonderten Nutzungsvereinbarung. Der Benutzer erwirbt außerhalb der bestimmungsgemä- ßen Nutzung der Software bei Vergabeverfahren auf der Vergabeplattform kei- nerlei weitere Rechte an der Software.Histologiegeräte
Medizinische Universität WienWienDeadline: Oct 02Die Medizinische Universität Wien (MedUni Wien) errichtet am Standort Allgemeines Krankenhaus Wien das Center for Precision Medicine. In dem Forschungsgebäude wird an einer raschen, präzisen und personalisierten Therapie auf Basis von individuellen Genanalysen geforscht und an der zukunftsweisenden Nutzung von maßgeschneiderten Therapien unter Berücksichtigung modernster Technologien gearbeitet. Vor diesem Hintergrund soll im Rahmen des gegenständlichen Vergabeverfahrens im Wesentlichen die Lieferung, Montage/Installation und Inbetriebnahme von FISH-Hybridisierungssystemen zur Vergabe gelangen. Es wird darauf hingewiesen, dass das Leistungsverzeichnis ausschließlich elektronisch direkt auf der Beschaffungsplattform auszufüllen ist.RFI - 1105601 UiO Life Sciences user equipment. K946.01.02 Dissolution tests with probes
STATSBYGGOSLODeadline: Sep 25Statsbygg is constructing the new Life Science Building for the University of Oslo and Oslo University Hospital on behalf of the Ministry of Education and Research, with South-Eastern Norway Regional Health Authority as co-client. The building will provide workspace for approximately 1,600 employees and 1,600 students. Ground and excavation works commenced in the second quarter of 2019, and completion is planned for the end of 2026. The facility will bring together various academic environments to collaborate across disciplines, developing new solutions to major challenges in health and sustainability, with access to state-of-the-art equipment required to support world-class research, education, and innovationREFURBISHED 3T MRI SCANNER
Technische Universiteit EindhovenEindhovenDelivery and installation of a REFURBISHED 3T MRI SCANNER 1Microscale thermophoresis device
Oulun yliopistoOULUDeadline: Oct 09University of Oulu, Biocenter Oulu, seeks a spectral shift and microscale thermophoresis device to characterise qualitatively and determine quantitatively nanoparticle, including protein, interactions in the range of weak to tight binders in solution without immobilization (hereinafter referred to as the "device"). The device must enable the assessment of sample quality and aggregation and differentiating binding events from aggregation. The device will be used for analysis of interactions of fluorescence labelled proteins with small molecules and vesicles. The detection must be independent of the mass ratio of the binding partners. The device must enable fast screening of interactions as well as sensitive affinity measurement. The measurable dynamic range of dissociation constant must be at least in nM -mM range and binding affinity in at least nM -mM range. Low sample consumption (in order of 10 microlitre) and low nanomole of the labeled target is needed for the measurement. The device must enable detection of the interaction based on changes of emission spectrum of exited fluorophore under isothermal conditions and must be able to create a microscopic non-isothermal temperature field (temperature gradient) and determine nanoparticle including protein binding events based on the temperature related intensity change and fluorescence intensity change following thermophoresis under the thermal gradient. Intensity changes and/or spectrum shifts of the fluorescence probe versus ligand concentrations are measured and plotted to calculate the dissociation constant. The device must come with detailed documentation of all features. The device will be part of the Proteomics and protein analysis core facility infrastructure of Biocenter Oulu. The core facility has an open access policy, and the instrumentation and software must be easy to use and maintain. The device must include a user interface to control the operation. The device must be well suited to an academic multi-
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- No specific submission deadline is currently stated for this notice.
- Who is the contracting authority?
- The contracting authority is European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEs.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.