LuonnonvarakeskusHelsinkiTED
Hydrophones, acoustic release transponders and a command and control unit for the transponders
Please note that this is a prior infromation notice and this notice is not a call for tenders. The information provided in this notice is preliminary and may change as the preparation progresses. The Natural Resources Institute Finland (Luke) is planning to purchase hydrophones, acoustic release transponders and a command and control unit...
Submission deadline: September 04, 2026Type: Tender
Measurement Technology
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Luonnonvarakeskus
- Published:
- August 04, 2026
- Deadline:
- September 04, 2026
- Topic:
- Measurement Technology
Tender description
Show full descriptionCollapse description
Please note that this is a prior infromation notice and this notice is not a call for tenders. The information provided in this notice is preliminary and may change as the preparation progresses. The Natural Resources Institute Finland (Luke) is planning to purchase hydrophones, acoustic release transponders and a command and control unit for the transponders. Hydrophones are needed for research conducted on aquatic mammals to record their underwater calls and the surrounding underwater soundscape. The specific requirements for the hydrophones are: • Low power consumption, very low self-noise and 60 kHz bandwidth • Long battery endurance lasting up to 160 days • Must be able to provide up to 2 TB of removable data storage • Recording bandwidth of 20 Hz – 60 kHz • Sample rate of up to 192 kS/sec • Must provide a durable titanium housing • Must contain a removable protective hydrophone cage • Must be able to operate in depths of several hundred meter - up to 500 m depth rating • Must be suitable for up to 1 year deployments In addition, the hydrophones cannot be retrieved from depths by diving; thus, a remote release mechanism that brings the hydrophone up to the water surface is needed to accompany the hydrophone. The requirements for the release transponders are: • Must be compatible with the hydrophone type used in the project • >13 months deployment with alkaline battery pack • Integrated inclinometer • Uses a storage mode eliminating power consumption when not in use • Reliable, 'screw-off' release • Rugged, compact design • Working Load Limit of 150 kg • Depth rated to 1,000 m Further, a topside command and control unit is required to control and operate the release transponders. It should have the following requirements: • Must be robust and portable • Must communicate with release transponder RT 6-1000 from the surface • Must be able to operate in harsh marine environments. • High brightness, resistive touch screen display is required • Must come with an easy-
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
5 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Procedure data
Unlock5 details capturedPublication number · Buyer reference · Procedure type · Contract type · +1 more
Performance locations
Unlock2 details capturedPerformance locations
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
10Procurement - Locks, fittings and access control with the accompanying goods and services, 2026
Ålesund kommuneÅlesundDeadline: Aug 27The aim of the contracts is to cover the customer ́s need for locks, fittings and access control with the accompanying goods and services in accordance with the requirement specifications. Tenderers must be able to deliver, assemble and maintain most types of locks and fittings, as well as produce and deliver keys etc. Tenderers must also be able to deliver, assemble and maintain goods and services connected to the lock and access control system (e.g. iLOQ and ARX including licences), as well as door automation, door closers and door pumps. The customer has a large and varied building stock and therefore needs a wide range of such goods and services. Assignments in this agreement will mainly consist of the delivery and installation of locks and fittings for doors, establishment and installation of a lock system and access control, service assignments and consultancy services. Tenderers must be able to handle both planned/ordinary assignments and urgent assignments (critical or non-critical) that require a short response time. This procurement is divided into two (geographical) sub-contracts (1. Northern and second. Søre). For each of the sub-contracts, the customer would like to enter into framework agreements with several tenderers (parallel framework agreements), provided that there are a sufficient number of qualified tenderers.DCC - Prior Information Notice (PIN) to alert the market for the Establishment of a Single-party Framework Agreement for Architect Led Integrated Design Team Services for Fire Safety Remediation Works
Dublin City CouncilDublinDeadline: Aug 28This Prior Information Notice is to alert the market, this is not a call for competition. This is a Prior Information Notice (PIN) and not a call for competition; a call to competition may be placed within the next 12 months. Dublin City Council intends to invite submissions from Architect Led Integrated Design Teams with the expertise and competence related to the design and management of delivery of the fire safety remediation of existing, multi-storey, buildings of a variety of uses. This process is a statement of a potential Tendering process with the intention of establishing one (1) Single Party Framework during the next 12 months. Details of any individual procurements pursuant to this notice will be advertised in due course. Dublin City Council does not require a response to this Prior Information Notice. Dates within this notice are anticipated and may be adjusted prior to publishing. Please note that this is not a call for competition and no tender documents are available at this stage.External inspections and control of participants in the power industry and affected parties.
Norges vassdrags- og energidirektorat (NVE)OSLODeadline: Aug 24The framework agreement shall ensure the Regulation Authority for Energy (RME) access to consultancy services in connection with inspections and control of participants in the power industry and involved parties. The framework agreement will primarily be used for inspections and controls of the schemes for electricity subsidy and the Norgespris. The framework agreement is not limited to these schemes and it will also be able to cover similar assignments within concurrent thematics, including inspections and controls that are within RME ́s authority. The framework agreement can also include minor assignments where the contractor provides RME assistance with the execution of individual assignments within similar inspection and control processes, for example assistance with data acquisition, data review and analyses. The agreement period for the framework agreement is two years, with an possibility for an extension on verbatim terms for 1+1 year, so that the maximum duration of the agreement period is four years from signing of the contract.26016 - Contract for the procurement of a 'upgrading control system for pumping station'.
Den Norske Opera & BallettosloDescription of the procurement The existing PLS control from Siemens is old, outdated and is out of production. · The existing CPU will be replaced with Simatic S7 - 1500 with the accompanying I/O modules. · There are also old WAGO PLSs in the existing installations, which will be replaced with ET200 SP I/O modules. · The service panel shall be replaced with the TP 700 panel from Siemens. · The existing profibuss cabling shall be replaced with a new profinet installed by Rexroth. · Updating of the existing form and changes in Eplan. · Adapted interface for Waagner Biro · Programming and commissioning (agreed with Waagner Biro so that this fits into their schedule) · Updating Eplan P8 (2026) documentation including terminal, cable, layout charts, data lists as well as an overview of necessary electrical components. Table of Truth. · Siemens Norway Scalance will move from the fifth gallery to the pump station and get it online. Justification for contract award without a prior notice. The procurement is planned to be carried out without a competition pursuant to the Public Procurement Regulations (LOA§4, FOA §13-4 letter b2) as the contract can only be delivered by one tenderer for technical reasons. As the procurement includes changes and further development of the existing software, only the original supplier has the necessary access to and competence in the source code in order to implement the changes in a secure and reliable manner. This is necessary in order to ensure the system's functionality and security. The contract is planned to be awarded Bosch Rexroth AS, who is a supplier of the relevant system and has the necessary competence for delivery, installation and follow-up. Deadline for objections This decision has been carefully considered to ensure that it fulfils the requirements of the act, while safeguarding our needs in an effective way. We want to uphold the principles of openness and transparency in the process. Any objections to this decision are requested to be addressed via the Artifik platform within 10 days from the date of this notice.Framework Agreement for the Delivery of Control Systems (IEC104) and the Provision of related services
TenneT TSO GmbHBayreuthDeadline: Jun 30Framework Agreement for the Delivery of Control Systems (IEC104) and the Provision of related services TenneT is a leading European transmission system operator responsible for the safe and reliable transmission of electrical energy over long distances. TenneT’s core tasks include the expansion and maintenance of the transmission grid, the integration of renewable energy sources, and the assurance of grid stability. TenneT’s grid area covers large parts of Germany and the Netherlands and includes both onshore and offshore connections. As an operator of critical infrastructure, the security and reliability of the systems in use are of particular importance. The aim of this tender is the establishment of two framework agreements for the procurement of substation Control Systems, in particular Intelligent Electronic Devices (IEDs) and field control units, for use in TenneT TSO GmbH’s (TTG) high‑voltage and extra‑high‑voltage substations. The systems to be procured are intended for control, monitoring, signalling and automation purposes within substations and are a key element of secure and reliable grid operation. Within the scope of this tender, TTG intends to procure Control System components including, but not limited to, bay control units, station control units, interface devices, and related auxiliary equipment. A central focus of the procurement is the use of the communication protocol IEC 60870‑5‑104 (IEC 104) for the exchange of control, status and measurement data between the substation level and higher‑level control systems. The devices shall support typical substation automation functions, reliable IEC 104 communication, and seamless integration into existing station control concepts in accordance with applicable technical standards. The subject of this tender is the supply of Control Systems hardware, including IEDs and associated components, as well as related documentation and services necessary for commissioning and integration into TTG’s substations. The framework agreement shall enable TTG to call off devices on demand over the contract term for new installations, refurbishments, and replacement purposes. Parallel to the hardware framework agreement, TTG intends to conclude a separate service contract covering the maintenance of the devices and the maintenance of embedded software, including corrective and preventive measures as well as software updates and upgrades, in accordance with the contractual provisions. Due to increasing requirements regarding system availability and redundancy, the procurement procedure is structured into two lots, which will be awarded separately. The lot structure is intended to ensure supply security, operational resilience and redundancy of the Control Systems deployed within TTG’s transmission grid. TenneT TSO GmbH is certified according to ISO 27001. Therefore, only Control Systems and equipment that comply with TTG’s Operational Technology security requirements may be offered (OT security and IT security requirements). Tender Documents To participate in the tender, please complete the Non‑Disclosure Agreement below and send it via email to: [email protected] Access to the additional tender documents will be granted immediately upon receipt and review of the document. TenneT TSO GmbH will treat the documents you submit and the trade and business secrets contained therein as confidential in accordance with Section 5 of the Sector Ordinance.Supply of Forecourt Purchase (Fuel) Card and Associated Services
An Post_391Dublin 1The Successful Tenderer will be required to provide AN POST with purchase (fuel) cards which permits the purchase of products and services on service station forecourts throughout the Republic of Ireland. The Services should be available 7 days a week, 365 days a year and ideally would like 24-hour coverage but accept this is not always possible in remote locations. The purchase (fuel) card should enable AN POST to purchase the following products/services but is not limited to • Automotive Ultra Low Sulphur Diesel Fuel • Hydrotreated Vegetable Oil (HVO) Class II • Other fuel alternatives that may be required during the term of a Contract • Electrical Charging • Vehicle Washing Facilities • Lubricants • AdBlue • Screen Wash The above list may change depending on operational requirements. The Services associate with the supply of the cards must include the management and co-ordination of the purchase card services and provide access to an online management information system where data on purchases can be accessed and/or reports can be created. The Successful Tenderer must be able to provide a solution that enables card use restrictions / controls that enables the purchase of certain products/services and if required, set spending limits, enable PIN security, enable mileage tracking, anti-fraud measures. The Successful Tenderer is responsible to ensure that a network of available service stations is maintained throughout the term of this contract “Coverage”. The Services must be provided in accordance with good industry practice and comply with all relevant and applicable laws and licensing requirements. Applicants will be expected to demonstrate to AN POST’s complete satisfaction that they have the capacity and capability to provide all of the services required. The requirements contained in this notice are based on AN POST’S current requirements which are indicative only, are not exhaustive and are subject to change in line with the business needs and ongoing operational requirements of AN POST. Please see accompanying Pre-Qualification Questionnaire.The Supply and Operation of Two Mobile Concession Units in Two Locations in Kildare County Council
Kildare County Council_385NaasDeadline: Aug 11The licence to be awarded under this licence agreement concerns the provision of two mobile concession stands in two locations in Kildare County Council managed parks; Kerdiffstown Park and deBurgh Woodland Gardens, for a one (1) year duration, with the option to renew yearly for a maximum of three (3) years. The successful tenderer to whom the licence is awarded will be required to provide a professionally managed, high-quality service at the two locations. The successful tenderer will be required to vacate each site each day. If you are not in a position to supply and operate in both locations, but you are in a position to operate one; either Kerdiffstown Park or deBurgh Woodland Gardens, please consider submitting a tender for consideration, specifying which location you are interested in. The final location will be chosen at the discretion of Kildare County Council.Internal Control System
Veikkaus OyVeikkausDeadline: Aug 24Veikkaus is requesting tenders for the procurement and implementation of an Internal Control System (ICS). Veikkaus will select one supplier to provide the ICS as Software. The objectives of the procurement are: • Ensure the integrity and correctness of the Games and related processes; • Strengthen Veikkaus' internal control environment in line with Finnish and EU regulation as at 1 July 2027; • Provide reliable, transparent, and auditable control evidence to authorities, internal audit, and Veikkaus management; • Integrate with Veikkaus' existing gaming and support systems; • Support both current and reasonably foreseeable future regulatory requirements regarding lottery and draw-based games. The offered solution shall be a fully functional ICS provided as a Service according to the requirements and descriptions set out in the Call for Tender documents. The agreement does not grant the supplier an exclusive right to provide the service to Veikkaus.Call for Tenders dated 28th July 2026 for the supply, delivery, installation and maintenance of tools and equipment for T4 subjects to Moyle Park College 60121B
Moyle Park CollegeDublinDeadline: Aug 31Moyle Park College is seeking proposals for the supply, delivery, installation and maintenance of sustainable (where possible) tools and equipment for the teaching of T4 Subjects. It is intended to award a contract to a single supplier for each Lot of this competition. Tenderers must be able to supply each item on the specification list as per the Lot tendered for as provided. An incomplete Lot will not be considered unless the tender says otherwise.EU space Data (Galileo and Copernicus) Integration to support fisheries control
European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsDeadline: Sep 10This procurment implements a Pilot Project.The pilot project will define minimum technical, operational and regulatory requirements for the integration of EU Space data (Galileo and Copernicus) to support fisheries control. Currently there are no standards and no regulations for the use of GNSS (e.g. Galileo authentication) and Copernicus services (SAR and optical images) to be used for law enforcement. The project will contribute to the work of European Committees for drawing up standards in the field of fisheries control.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 04. September 2026.
- Who is the contracting authority?
- The contracting authority is Luonnonvarakeskus.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.