FAIR - Facility for Antiproton and Ion Research in Europe GmbHDarmstadtTED
Exhaust air measurement system for FAIR
In the permit applications for the construction of FAIR, FAIR GmbH specified the maximum amount of activity in the exhaust air through conservative estimates using maximum beam parameters and covering beam scenarios. Due to the expected amount of activity in the exhaust air, FAIR will be required in the future to operate an exhaust air me...
Type: Tender
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- FAIR - Facility for Antiproton and Ion Research in Europe GmbH
- Published:
- August 20, 2026
- Deadline:
- Not specified
Tender description
Show full descriptionCollapse description
In the permit applications for the construction of FAIR, FAIR GmbH specified the maximum amount of activity in the exhaust air through conservative estimates using maximum beam parameters and covering beam scenarios. Due to the expected amount of activity in the exhaust air, FAIR will be required in the future to operate an exhaust air measurement system that specifies the composition and activity of the discharge. The sampling system should consist of a sampling rack that takes a representative air sample of approximately 1/1000 of the exhaust air volume flow, transports it to the measuring devices via a loop system, and returns it to the exhaust air stream after the measurement. The measuring system should enable continuous measurement of radioactive aerosols and gaseous radioactive nuclides. Gamma spectrometric measurements should be performed in parallel or subsequently during both measurements.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
7 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock49 details capturedDocuments
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock1 detail capturedLots LOT-0001
Procedure data
Unlock6 details capturedPublication number · Procedure reference · Buyer reference · Procedure type · +2 more
Performance locations
Unlock3 details capturedPerformance locations
Bidders and contractors
Unlock2 details capturedBidders and contractors · Address
Publisher
Unlock6 details capturedPublisher · Address · Contact
Related tenders
10Exhaust air measurement system for FAIR
FAIR - Facility for Antiproton and Ion Research in Europe GmbHDarmstadtIn the permit applications for the construction of FAIR, FAIR GmbH specified the maximum amount of activity in the exhaust air through conservative estimates using maximum beam parameters and covering beam scenarios. Due to the expected amount of activity in the exhaust air, FAIR will be required in the future to operate an exhaust air measurement system that specifies the composition and activity of the discharge. The sampling system should consist of a sampling rack that takes a representative air sample of approximately 1/1000 of the exhaust air volume flow, transports it to the measuring devices via a loop system, and returns it to the exhaust air stream after the measurement. The measuring system should enable continuous measurement of radioactive aerosols and gaseous radioactive nuclides. Gamma spectrometric measurements should be performed in parallel or subsequently during both measurements.Exhaust air measurement system for FAIR
FAIR - Facility for Antiproton and Ion Research in Europe GmbHDarmstadtIn the permit applications for the construction of FAIR, FAIR GmbH specified the maximum amount of activity in the exhaust air through conservative estimates using maximum beam parameters and covering beam scenarios. Due to the expected amount of activity in the exhaust air, FAIR will be required in the future to operate an exhaust air measurement system that specifies the composition and activity of the discharge. The sampling system should consist of a sampling rack that takes a representative air sample of approximately 1/1000 of the exhaust air volume flow, transports it to the measuring devices via a loop system, and returns it to the exhaust air stream after the measurement. The measuring system should enable continuous measurement of radioactive aerosols and gaseous radioactive nuclides. Gamma spectrometric measurements should be performed in parallel or subsequently during both measurements.EU contract award notice / Hyperspectral measurement system
Finnish Defence Forces Logistics CommandTampereEU contract award notice / Hyperspectral measurement system The purpose of the system is to execute hyperspectral measurements. The system shall include all the necessary equipment for the measurements, excluding power generator. The measurements are executed outdoors at ground level without any artificial illumination. The hyperspectral measurement system shall enable daytime measurements in Finland during spring, summer and autumn. The spectral range of the measurements shall be from 400 to 2500 nm. The required measuring distances are 20 meters and 200 meters. Two hyperspectral cameras shall be included with two different optics for both cameras.01/2600026777 50072442 FAIR
FAIR - Facility for Antiproton and Ion Research in Europe GmbHDarmstadtDeadline: Aug 14LOT 1 Short Description of Power Supply for SIS100 Radiation Resistant Quadrupole Magnets A new international scientific research centre facility FAIR (Facility for Antiprotons and Ion Research) is under constructed next to the existing GSI Helmholtz Centre for Heavy Ion Research. FAIR will provide antiproton and ion beams of unprecedented intensity and quality. One of the essential parts of FAIR will be the Heavy Ion Synchrotron (SIS)100. Radiation Resistant Magnets are a component of SIS100 and it requires a power supply system. The current in the magnets must be ramped up to 850 A with an absolute accuracy of 1 x 10-4 *IN. The maximum output voltage is of about 300V. This power converter will be feed by 400 V supply system. LOT 2 Short Description of Power Supply for SIS100 Fast Quadrupole Magnet A new international scientific research centre facility FAIR (Facility for Antiprotons and Ion Research) is under constructed next to the existing GSI Helmholtz Centre for Heavy Ion Research. FAIR will provide antiproton and ion beams of unprecedented intensity and quality. One of the essential parts of FAIR will be the Heavy Ion Synchrotron (SIS)100. Fast Quadrupole Magnet is a component of SIS100 and it requires a power supply system. The current in the magnet must be ramped up to 1485 A with an absolute accuracy of 1 x 10-4 *IN. The maximum output voltage is of about 210 V. This power converter will be feed by 400 V supply system. A bidder may bid on one or both lots. If a bidder bids on both lots, the bidder may offer a discount on the respective lot by taking advantage of potential synergy effects into account. However, this is not mandatory.The contracting authority may award one or both lots to one single bidder.Qualification - Zero point measurement for the overall system for competence and career development in nurseries and schools.
UtdanningsdirektoratetOSLODeadline: Aug 19The Ministry of Education and Training has been given the assignment by the Ministry of Education and Research to establish and further develop a comprehensive system for competence and career development for employees in nurseries and schools (assignments 2024-027), hereafter referred to as the "system". The aim of the assignment is to carry out a zero point measurement for the overall system for competence and career development. The zero point measurement shall establish a reference point that describes the starting point in which the system is implemented, and provide a basis for future follow-up and evaluations of how the main measures, individually and together, contribute to realising the goals in the strategy.Combined thermogravimetric/calorimetric (STA) system
Chalmers Tekniska Högskola AktiebolagGÖTEBORGDeadline: Aug 20The nuclear chemistry group at the department of chemistry and chemical engineering is procuring a combined thermogravimetric/calorimetric (STA) system. The STA system will be used in the research work performed by the group and be set up in Chalmers' radioactive labs for measurements related to nuclear fuel studies and development.LOT 2: 1 unit of Power Supply for SIS100 Fast Quadrupole Magnet
FAIR - Facility for Antiproton and Ion Research in Europe GmbHDarmstadtShort Description of Power Supply for SIS100 Fast Quadrupole Magnet A new international scientific research centre facility FAIR (Facility for Antiprotons and Ion Research) is under constructed next to the existing GSI Helmholtz Centre for Heavy Ion Research. FAIR will provide antiproton and ion beams of unprecedented intensity and quality. One of the essential parts of FAIR will be the Heavy Ion Synchrotron (SIS)100. Fast Quadrupole Magnet is a component of SIS100 and it requires a power supply system. The current in the magnet must be ramped up to 1485 A with an absolute accuracy of 1 x 10-4 *IN. The maximum output voltage is of about 210 V. This power converter will be feed by 400 V supply system.LA3358F - EPA - CFT for a Multi-Supplier Framework Agreement for the Supply, Delivery, Installation, Servicing and Maintenance of Equivalent Automatic Particulate Matter Monitoring Instruments
Education Procurement Service (EPS)LimerickThe supply, delivery, installation, servicing and maintenance for the National ambient air monitoring network. A requirement for the maximum of thirty-two (32) analysers, to be replaced across the National ambient air monitoring network, over a period of four years) (to also include warranty, servicing and maintenance). Please reference Appendix A which lists the location and addresses of each of the EPA sites. Ambient air quality instrumentation will be sited at locations around the Republic of Ireland in accordance with the requirements of the CAFE Directive 2024/2881. Instrumentation suitable for the continuous automatic measurement of Particulate Matter Monitoring in ambient air to CAFE Directive requirements, robust and reliable performance, satisfactory service, and maintenance arrangements.Laboratory automation for Sykehuset Østfold HF
SYKEHUSINNKJØP HFVADSØDeadline: Sep 03The procurement includes an automation system with connected analysis instruments combined in a fully automatic system, including middleware, conveyor belt, pre-analytical functions (replacement of the current automation system at Kalnes), as well as free-standing instruments at the locations in Askim, Fredrikstad, Moss, Sarpsborg and Halden in order to ensure method equality and connection to a joint middleware system. The current analyses shall be maintained and the automation system shall have the capacity to ensure an annual increase of 4% from the analysis volume in 2025. The automation system shall cover the disciplines of clinical chemistry (including lowering and ionised calcium), immune chemistry, haematology, coagulation, infection serology, HbA1c and allergy and auto-immunity. It ought to have a high degree of flexibility both as regards the physical system and middleware, and it should easily include new analysis instruments, modules and tests (analyses) that can be relevant in the coming years. Later expansion with other disciplines than those mentioned above can be relevant. The automation system shall see to the receipt and distribution of samples for other parts and disciplines in the Centre for Laboratory Medicine. The aim of the procurement is to see to the Hospital Østfold ́s level of activity and the need for development over the next 10 years, and the solution shall contribute to realising the Centre for Laboratory Medicine ́s basic idea that everything that can be automated shall be automated and everything that can be connected to an automation system shall be connected independently of the discipline.Turnkey Filtered Rayleigh Scattering (FRS) System for the combined measurement of pressure, temperature and three-component velocity field in gaseous flows
Aarhus UniversitetAarhus CAarhus University intends to award a contract without prior publication pursuant to section 80(3)(2) and section 80(4) of the Danish Public Procurement Act, cf. Article 32(2)(b)(ii) of Directive 2014/24/EU, on the basis that the required supplies and services can only be provided by one particular economic operator due to an absence of competition for technical reasons. Aarhus University has assessed that no reasonable alternative or substitute exists, and that the absence of competition is not the result of an artificial narrowing of the parameters of the procurement. The intended contract concerns the delivery of a complete turnkey Filtered Rayleigh Scattering (FRS) system for laser-based diagnostics in gaseous flows. The system is required for quantitative planar measurements of pressure, temperature and three-component velocity information in a measurement region of up to 100 mm × 100 mm. The required system must comprise, as one integrated measurement chain, a frequency-tunable narrow-linewidth laser source at approximately 532 nm, high-precision wavelength measurement and stabilisation, iodine-based molecular filtering, beam delivery and light-sheet optics, multi-perspective imaging from nine viewing directions, perspective calibration, control and data acquisition functionality, installation, commissioning, documentation, training and acceptance testing. The decisive requirement is not the supply of individual optical, laser, imaging or software components, but the delivery of a complete and operational FRS measurement system where one supplier assumes responsibility for the integration, calibration, commissioning and verified performance of the complete measurement chain. FRS measurements depend on the combined and synchronised performance of laser frequency control, molecular filter transmission, optical alignment, light-sheet formation, imaging geometry, calibration and data acquisition. These elements are technically interdependent and jointly determine whether the system can produce usable calibrated data for pressure, temperature and three-component velocity evaluation. In Aarhus University’s assessment, procuring individual components from several suppliers would not constitute a reasonable alternative or substitute, as it would not provide a supplier with overall responsibility for the integration, calibration, commissioning and verified performance of the required operational FRS functionality. Based on Aarhus University’s technical and market assessment, ILA R&D GmbH is the only economic operator identified as capable of delivering the required complete turnkey FRS system and assuming responsibility for its overall functionality. Other suppliers considered may be able to provide individual components or related optical flow-diagnostic systems, such as lasers, wavelength meters, cameras, optical components, PIV/PTV, LDV, LIF, BOS, Rayleigh/scalar imaging or software interfaces. However, Aarhus University has not identified a reasonable alternative or substitute capable of delivering the specific integrated FRS solution required, including iodine-filtered FRS, frequency-scanning and single-frequency operation, nine-perspective imaging, perspective calibration and acceptance testing of the complete system. Aarhus University therefore considers that the intended direct award is justified by the absence of competition for technical reasons. The absence of competition results from the technical requirements of the intended FRS measurement concept and the need for one supplier to deliver and take responsibility for the complete integrated system, and not from an artificial narrowing of the parameters of the procurement.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- No specific submission deadline is currently stated for this notice.
- Who is the contracting authority?
- The contracting authority is FAIR - Facility for Antiproton and Ion Research in Europe GmbH.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.