Chalmers Tekniska Högskola AktiebolagGÖTEBORGTED
Atomic Force Microscope (AFM)
Atomic Force Microscope (AFM) for the characterization of film samples and surfaces under both dry conditions and in liquid environments.
Submission deadline: September 03, 2026 (expired)Type: Tender
Laboratory Instruments
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Chalmers Tekniska Högskola Aktiebolag
- Published:
- July 20, 2026
- Deadline:
- September 03, 2026
- Topic:
- Laboratory Instruments
Tender description
Atomic Force Microscope (AFM) for the characterization of film samples and surfaces under both dry conditions and in liquid environments.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
5 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock2 details capturedLots LOT-0001 · Lots LOT-0002
Procedure data
Unlock6 details capturedPublication number · Procedure reference · Buyer reference · Procedure type · +2 more
Performance locations
Unlock2 details capturedPerformance locations
Related tenders
9AFM - Atomic Force Microscope
Institute of Science and Technology AustriaKlosterneuburgKauf eines AFM - Atomic Force MicroscopeSupply Delivery Installation and Commissioning of an Atomic Force Microscope complete with Glovebox
University College Dublin ( UCD )DublinUniversity College Dublin requires advanced Atomic Force Microscope complete with Glovebox for characterisation capabilities for current and emerging functional and energy-related materials, including the ability to perform quantitative nanoscale electrical, electromechanical, nanomechanical, catalytic, and electrochemical measurements across a range of controlled environments spanning inert-gas to liquid and aqueous conditions. These capabilities are essential for addressing the universitys institutional research priorities and broader societal challenges in sustainability and materials innovation.Raman Microscope for DTU Chemistry
Danmarks Tekniske Universitet - DTUKgs. LyngbyThe Technical University of Denmark (DTU) intends to acquire one complete high-resolution confocal Raman microscopy and spectroelectrochemical characterization system, including all associated hardware, software, accessories, installation, commissioning, training, and warranty. The system will support research and education activities within catalysis, electrochemistry, materials science, energy conversion, sustainable fuels, and chemical synthesis. The primary purpose is to enable advanced in situ and operando characterization of functional materials, catalyst surfaces, and catalytic interfaces under realistic operating conditions, including electrochemical environments, elevated temperatures, controlled gas atmospheres, liquid-phase operation, and flow conditions. The instrument shall provide high-sensitivity Raman spectroscopy and microscopy with high spectral and spatial resolution. The system must support characterization of solids, liquids, heterogeneous materials, catalyst surfaces, thin films, nanostructured materials, powders, and solid–liquid and solid–gas interfaces. The equipment shall further enable investigation of reaction intermediates, catalyst transformations, phase transitions, adsorbates, reaction microenvironments, and dynamic processes occurring during electrochemical and catalytic reactions. The system shall include a confocal Raman microscope with automated operation, high-resolution spectroscopic capabilities, motorized sample positioning, automated focusing, Raman mapping and imaging functionality, and support for multiple excitation wavelengths covering the visible and near infrared spectral range, including excitation wavelengths of approximately 532 nm, 633 nm, and 785 nm. The system must be capable of performing both point measurements and spatially resolved Raman imaging of heterogeneous samples with automated data acquisition. The acquisition shall include low-noise detector technology suitable for weak Raman signals, time resolved measurements, and quantitative analysis of both Stokes and anti-Stokes Raman scattering. The system shall provide access to ultra-low-frequency vibrational information (down to 10 cm-1) relevant for studying structural changes, lattice dynamics, catalyst phase transformations, interfacial species, adsorption phenomena, and local temperature effects at catalytic interfaces. The instrument shall further enable simultaneous investigation of chemical composition, structural dynamics, and local thermal phenomena under operating conditions through acquisition of both Stokes and anti-Stokes Raman spectra. The system shall support automated Raman mapping and hyperspectral imaging of heterogeneous samples with micrometre-scale spatial resolution and high positional accuracy. The system must enable investigation of catalyst heterogeneity, dynamic restructuring processes, spatial distributions of reaction intermediates, and structure–activity relationships during operation. The system shall support time-resolved and operando measurements through direct integration be-tween electrochemical instrumentation and the spectroscopic platform, enabling synchronized electrochemical control and Raman data acquisition. The system shall allow simultaneous monitoring of electrochemical parameters and spectroscopic responses during catalytic operation and provide direct correlation between catalyst state, reaction intermediates, local temperature, and electrochemical performance. The equipment shall be suitable for spectroelectrochemical investigations of electro-chemical reactions and interfaces under controlled operating conditions. The acquisition shall further include dedicated spectroelectrochemical accessories, electrochemical cells suitable for operando measurements, flow-compatible accessories, control software, data acquisition and processing software, computer workstation, vibration-isolated installation platform, and all components necessary for full operation of the instrument. The system shall be designed for long-term research use and support future expansion through additional optical components, detectors, excitation sources, analytical modules, environmental cells, and experimental accessories. Scope of supply: • One complete confocal Raman spectroscopy and microscopy system. • High-resolution spectrometer and detector system. • Multiple excitation wavelengths. • Automated sample positioning, focusing, and mapping capabilities. • Raman imaging and hyperspectral mapping functionality. • Ultra-low-frequency Raman measurement capability. • Stokes and anti-Stokes Raman measurement capability. • Integrated spectroelectrochemical measurement capability. • Electrochemical cell and associated accessories for operando measurements. • Instrument control, acquisition, synchronization, analysis, and visualization software. • Computer workstation and control electronics. • Optical table or equivalent vibration-isolated installation platform. • Installation, commissioning, training, documentation, and warranty. Quantity: One complete integrated Raman microscopy and spectroelectrochemical characterization system.Transmission electron microscope
Kungliga Tekniska högskolanSTOCKHOLMKTH is seeking tenders for a 200 kV transmission electron microscope able to work in both transmission and scanning electron microscopy mode (S/TEM) with laser heating capability for sustainable metallurgy research.Supply, Delivery, Installation, Commissioning, and Validation of an Integrated Glove Box-Linked Dual Atomic Layer Deposition (ALD) Reactor System with Collocated Ellipsometer System for Tyndall, UCC
University College CorkCorkDeadline: Jul 24Tyndall National Institute, University College Cork (UCC) invites tenders for the supply, delivery, installation, Commissioning, Calibration and Validation of an integrated Atomic Layer Deposition (ALD), Glove Box, and Ellipsometer System, compromising four main components: (i) ALD Reactor 1: Designed for the deposition of 2D dichalcogenide materials, featuring process conditions and precursor delivery systems optimised for chalcogen-based chemistries. (ii) ALD reactor 2: Configured for the deposition of metal oxide films, designed for oxygen-rich precursor processes. (iii) Glove Box Module: Provides a controlled inert atmosphere that connects both ALD reactors, enabling contamination-free sample transfer and handling. (iv) Ellipsometer: Designed to operate both in-situ and ex-situ with each ALD reactor, allowing precise thin-film thickness and optical property characterisation for process monitoring, calibration, and validation. The system must be supplied and installed by the tenderer to ensure full system integration and operational compatibility for Tyndall National Institute. Together, this integrated system will form a key capability for atomic layer processing, supporting advanced thin-film deposition and real-time characterisation for next-generation materials research.Scanning Electron Microscope
Danmarks Tekniske Universitet - DTUKgs. LyngbyDeadline: Aug 31This tender concerns the acquisition of a scanning electron microscope (SEM) for a university facility that provides access to an extensive suite of nanofabrication and characterisation tools as one of its core purposes. Due to a recently identified bottleneck in the suite of high-end characterisation in the cleanroom, DTU wishes to acquire a SEM. This problem has arisen as the result of multiple breakdowns among the aging and current instruments thus exposing an unexpected vulnerability in the overall process flow of several of our commercial users. The instrument is intended to meet the characterization requirements of DTU’s key commercial customers. Accordingly, only a high-end system equipped with a field emission source, capable of delivering high emission at low energy spread, will be considered acceptable. The system must provide state-of-the-art lateral image resolution of 0.8 nm or better at an accelerating voltage of 15 kV, and 0.9 nm or better at 1 kV, both achieved without beam deceleration or sample bias and using the in-column secondary electron detector. The SEM must be compatible with samples originating directly from customer production processes and must therefore be capable of handling wafers with diameters of up to 200 mm. Typical substrate materials include silicon, fused silica, and quartz. These materials cannot be coated to reduce charging effects during SEM analysis, and the instrument must therefore be capable of imaging such non-conductive samples without the application of conductive coatings.Market consultation advanced inverted fluorescence microscope
Rijksuniversiteit GroningenGroningenDeadline: Jul 30Introduction Within the University of Groningen (UG), at the Groningen Research Institute of Pharmacy, the Pharmaceutical Analysis Group studies cell behaviour and nanoparticle dynamics in physiologically relevant microenvironments, with a particular focus on microfluidic devices and hydrogel-based platforms. A central aspect of this research is the ability to engineer precisely defined biochemical and physical microenvironments at the sub-micron scale, and to observe how cells and particles respond to these environments over time. To address the research questions arising in this context, an advanced inverted fluorescence microscope is required, capable of supporting both high-precision imaging and laser patterning of microenvironments, long-term live imaging of dim fluorescent samples across extended timescales of 24 hours or more, and real-time closed-loop experiment control, where imaging data must be processed and acted upon during acquisition rather than after the fact. To enable sub-micron laser photopatterning, the microscope must support stable and validated integration with the Alveole Primo2 system, a laser-based photopatterning module which will be available in the group. Together, these requirements place stringent demands on the optical performance, mechanical stability, and computational capabilities of the microscope. Please see the market consultation document for further information.Delivery of solid and liquid dairies to the Norwegian Armed Forces
ForsvarsmateriellOSLODeadline: Sep 25The Norwegian Defence Materiel Agency (NDMA) shall enter into framework agreements on behalf of the Norwegian Armed Forces in order to cover the Norwegian Armed Forces' need for solid and liquid dairies. Two sub-contracts shall be signed For the assignment, a framework agreement shall be signed for the procurement of liquid dairies and a framework agreement for the procurement of solid dairies. Tenderers can submit tenders for both or only one of the sub-contracts. If a tenderer gets both lots, the sub-contracts will be turned into a contract. NDMA refers to the attached tender documentation for each sub-area for further information.Focused Ion Beam, Scanning Electron Microscope (FIB-SEM)
Lunds universitetLundDeadline: Aug 24Lund Nano Lab (LNL) at Lund University intends to purchase a Focused Ion Beam Scanning Electron Microscope, in this document referred to as the FIB-SEM, instrument or equipment. This document lists all the requirements the FIB-SEM must meet. The instrument is intended to be used for high-resolution imaging, materials analysis and preparing samples for TEM analysis as well as for experiments at the MAX IV synchrotron.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 03. September 2026.
- Who is the contracting authority?
- The contracting authority is Chalmers Tekniska Högskola Aktiebolag.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.