Fraunhofer-Gesellschaft - Einkauf B12
Wafer cleaner / mask cleaner (IAF-08.3) - PR1146362-2050-P
Wafer cleaner / mask cleaner (IAF-08.3) The requirement is for a wafer and mask cleaning machine to be installed in an ISO Class 4 cleanroom and which must comply with European safety regulations for industrial equipment. The system is intended to remove particles and contaminants from wafers and lithography masks using aqueous and acidic...
Typ: Ausschreibung
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Fraunhofer-Gesellschaft - Einkauf B12
- Veröffentlicht:
- 30. März 2026
- Frist:
- Nicht angegeben
Ausschreibungsbeschreibung
Vollständige Beschreibung anzeigenBeschreibung einklappen
Wafer cleaner / mask cleaner (IAF-08.3) The requirement is for a wafer and mask cleaning machine to be installed in an ISO Class 4 cleanroom and which must comply with European safety regulations for industrial equipment. The system is intended to remove particles and contaminants from wafers and lithography masks using aqueous and acidic solutions, based on the RCA cleaning process. To ensure safe operation and a long service life, the process chamber must be made of process-media-resistant material and be equipped with an extraction system and leak detection. The system must be capable of reliably removing particles larger than 250 nm from (quartz) glass or wafers in order to ensure the purity required for the processes in the Fraunhofer IAF cleanroom and not to compromise process yield. Translated with DeepL.com (free version)
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
3 Datenbereiche verfügbar
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Ähnliche Bekanntmachungen
8Waferreiniger / Maskenreiniger (IAF-08.3) - PR1146362-2050-P
Fraunhofer-Gesellschaft - Einkauf B12Frist: 05. MaiBeschaffung eines Wafer- und Maskenreinigungsgeräts für den Einsatz in einem Reinraum der ISO-Klasse 4. Das Gerät muss Wafer und Lithographie-Masken mittels wässriger und saurer Lösungen (RCA-Prozess) von Partikeln > 250 nm reinigen. Anforderungen: Prozesskammer aus medienresistentem Material, integrierte Absaugung, Leckageerkennung sowie Einhaltung europäischer Sicherheitsvorschriften für Industrieanlagen.ICP Trockenätzanlage Chlor IV (IAF-07b1) - PR1119209-2050-P
Fraunhofer-Gesellschaft - Einkauf B121 piece Chlorine ICP Chlorine ICP etching system with planar plasma source The etching processes developed and qualified at the IAF for structuring must be directly reusable on the new system and deliver corresponding etching results, as with the etching system currently in use (Sentech ICP-RIE SI500 537). These known processes should be transferable to wafer sizes of 150 mm. Options: Substrate electrode Option to etch wafers with a diameter of 100 mm (flat) and fragments on metal carriers. Substrate electrode Option to etch 75 mm diameter wafers (flat) and fragments on metal carriers. Process chamber Heated liner Service Extended warranty Spare parts kit Gas ring Spare parts kit MVV measuring tube Spare parts kit Silencer and protective cover for lock pump Spare parts kit Turbo pump for lock Spare parts kit Coupling plate without window Spare parts kit Clamping for 150 mm wafers with notch Spare parts kit Julabo recirculating cooler as replacement Spare parts kit PLC control unit (CPU / RFC) Translated with DeepL.com (free version)Cluster_ALD_PECVD_ICP-CVD (IAF-05.1/05.2/05.3/05.4/05.5) - PR1036076-2050-P
Fraunhofer-Gesellschaft - Einkauf B121 piece Cluster_ALD_PECVD_ICP-CVD Fraunhofer IAF plans to purchase a cluster system with ALD, PECVD and ICP-CVD deposition chambers. The system should be suitable for processing 150 mm wafers.Prober 300mm (IAF-09.3) - PR971253-2050-P
Fraunhofer-Gesellschaft - Einkauf B122 pieces: Prober 300mm For the automated characterization of circuits in the millimetre wave range up to approx. 250 GHz by means of S-parameter and power measurements, two wafer probers are required that meet the highest requirements for positioning accuracy. Contact areas ("pads") of approx. 10µm must be able to be approached precisely and with high reproducibility over a "wafer" area of ø300 mm. As the height of these wafers can vary by approx. ±10µm, automatic height correction (Z-profiling) is required. Temperature control of the chuck is necessary.Frequency range extension modules for millimetre-wave network analysis (FHR-01) - PR926511-P
Fraunhofer-Gesellschaft - Einkauf B121 x frequency range extension module for millimetre-wave network analysis To expand a millimetre-wave measurement system, millimetre-wave frequency extension modules (so-called 'extenders’), 2-port waveguide calibration sets and reference horn antennas are to be procured. The frequency range extension modules will be used in conjunction with an existing Keysight PNA-X N5247B vector network analyser (not included in the scope of supply) to perform millimetre-wave network analysis. The extension modules must be compatible with a Keysight N5292A mm-wave test set controller (not included in the scope of supply); the relevant adapter cables are listed in LV Item 4.1.CD-SEM Measurement System (IPMS-MRS03.1) - PR884397-2480-P
1 CD-SEM Measurement System Requirements for top-down measurement of critical dimensions of lines/spaces, holes/columns and other fine features, such as elongated hile/pillar patterns formed on semiconductor wafers during wafer fabrication, using a high-throughput CD-SEM. The system is used for processing MEMS wafers in a CMOS-compatible clean-roam class 10 (approx. ISO 4) production environment. Optional service items: 1.15 General requirements The system is equipped with an uninterruptible power supply (UPS). Yes 3.3 Measurement system The traceable certified standard is part of the delivery. The calibrations are not older than 20% of the recommended calibration interval at the time of delivery. Note: A traceable certified standard can be provided by the supplier. Otherwise, Fraunhofer IPMS will provide a VLSI-certified standard. Yes 4.16 Process The system is capable of performing 3D measurements using a tilted beam. Yes 4.17 Process The system can detect and visualize backscattered electrons (BSE). It is possible to perform CD measurements on the BSE image. Yes 8.2 Optional tool features Please provide an offer for a set of consumables (lamps, O-rings, valves, etc.). Yes 8.4 Optional tool features Please provide a separate offer for typical spare parts such as axis encoder, laser interferometer, etc. Yes 11.4 Extended Warranty Should offered extended warranty starting from the date on which the statutory warranty expires. An extended warranty of further 12 months should be offered. During the warranty period all support, repair and parts cost should be covered. 12 monthsInline automatic optical inspection (AOI) with high-speed Analysis for QMI systems
Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e. V.ErlangenFrist: 11. MärzModular, fully automated prober for optical inspection and electrical contact of electronic, photonic and mi-cro‑mechanical devices — including advanced manufacturing approaches such as quasi‑monolithic integration. The system handles 200 mm wafers as well as frames, tapes, trays and comparable substrates. An end‑to‑end carrier handling system loads carriers with mounted substrates from specialized cassettes, positions them on the prober's vacuum chuck and performs fully automated alignment. A tEvaporation System (IAf-06.1) - PR1070484-2050-P
Fraunhofer-Gesellschaft - Einkauf B121 Stück Evaporation system Das Fraunhofer IAF plant die Anschaffung einer Elektronenstrahl-Verdampfungsanlage für die Metallverdampfung. Die Anlage soll für die Bearbeitung von 150-mm-Wafern geeignet sein.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Fraunhofer-Gesellschaft - Einkauf B12.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.