Department of ContractsFlorianaTED
Lieferung, Lieferung und Inbetriebnahme von vier neuen emissionsarmen Pritschen-LKW mit Wartungsvertrag für Abtransport
SPD8/2025/162 - TENDER FOR THE SUPPLY, DELIVERY AND COMMISSIONING OF FOUR NEW LOW EMISSION DOUBLE CAB LIGHT TIPPER TRUCKS WITH MAINTENANCE AGREEMENT FOR WASTE TRANSPORT – CLEANSING AND MAINTENANCE DIVISION
Typ: Ausschreibung
Fahrzeuge, Fahrzeugwartung
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
SPD8/2025/162 - TENDER FOR THE SUPPLY, DELIVERY AND COMMISSIONING OF FOUR NEW LOW EMISSION DOUBLE CAB LIGHT TIPPER TRUCKS WITH MAINTENANCE AGREEMENT FOR WASTE TRANSPORT – CLEANSING AND MAINTENANCE DIVISION
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Department of Contracts
- Veröffentlicht:
- 15. Juli 2026
- Frist:
- Nicht angegeben
- Thema:
- Fahrzeuge
Ausschreibungsbeschreibung
SPD8/2025/162 - TENDER FOR THE SUPPLY, DELIVERY AND COMMISSIONING OF FOUR NEW LOW EMISSION DOUBLE CAB LIGHT TIPPER TRUCKS WITH MAINTENANCE AGREEMENT FOR WASTE TRANSPORT – CLEANSING AND MAINTENANCE DIVISION
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
9- Department of ContractsFlorianaFrist: 05. Aug.
CT2170/2026 - Tender for the supply, delivery and commissioning of four (4) brand new low emission 17 – 19 Tonne Water Bowsers to the Cleansing and Maintenance Division (CMD) within the Ministry for the Local Government and Public Works (MLGP)
Tender for the supply, delivery and commissioning of four (4) brand new low emission 17 – 19 Tonne Water Bowsers to the Cleansing and Maintenance Division (CMD) within the Ministry for the Local Government and Public Works (MLGP) - Sectoral Procurement DirectorateFloriana
Lieferung, Inbetriebnahme und Wartung von zwei neuen Niedrigemissions-Müllsammelfahrzeugen für das Amt für Umwelt – Gozo
The subject of this tender is the supply, delivery, testing and commissioning of two (2) brand new low emission Refuse Collection Vehicles (RCV) for the Eco-Gozo Directorate within the Ministry for Gozo and Planning. - Rabat Local Council (Malta)RABATFrist: 20. Juli
Tender for the Supply, Delivery, Installation, Testing, Commissioning of Low Light Pollution Decorative Luminaires and Provision and Installation of Protection Fence in Ġnien il-Barnuża l-Ħamra, Il-Baħrija, Ir-Rabat, Malta
The subject of this call for tenders is the supply, delivery, installation, testing, commissioning of low light pollution decorative luminaires and provision and installation of protection fence in Ġnien il-Barnuża l-Ħamra, il-Baħrija, ir-Rabat, Malta. The place of acceptance of the works shall be at Baħrija, limits of Ir-Rabat, Malta and the time-limits for the execution of the contract (supply, delivery, installation, testing, commissioning of low light pollution decorative luminaires and provision and installation of protection fence) shall be eight (8) weeks with a Maintenance Period of four (4) years from the formal notice of commencement. - Cork County CouncilCorkFrist: 31. Juli
Establishment of an approved Shortlist for the design, supply, installation, operation and maintenance of Public Residential, Destination Electric Vehicle Chargers for Cork and Kerry County Councils
This procurement is to establish a Shortlist of competent Contractors for the design, supply, installation, commissioning, certification, operation and maintenance of public EV charging units for Cork County Council and Kerry County Councils' Pilot Electric Vehicle Charging Point Scheme. These Charging Points which will be installed in public accessible locations (5no. locations are currently proposed). It is the Contracting Authorities intention to enter into a Shortlist Agreement with Shortlist Members in a Multi-Party Shortlist for Design, Supply, Installation, Commissioning, Certification and Subsequent Operation and Maintenance of Electric Vehicle Chargers and associated infrastructure under the Department of Transport’s Regional and Local EV Charging Network Plan. This plan is being implemented by Zero Emission Vehicles Ireland (ZEVI) section of the Department of Transport and Local Authorities. The country has been divided up into regions for this implementation. Cork County Council and Kerry County Council areas form Region 6. Cork County Council is the lead authority for Region 6 and is managing this procurement. The supply and associated works and services for installation and commissioning will be funded through the Department of Transport – ZEVI. This is the first stage of this competitive procedure whereby any interested party may submit a response to the Request for Tender in order to be considered for inclusion on the next stage. Following evaluation, the top five (5) scoring applicants will be invited to tender at stage 2, should that number qualify. Charge Point Operators that are awarded contracts from the Shortlist will be required to enter separate contractual agreements with each Contracting Authority. - Dublin Port Company_411DublinFrist: 13. Aug.
Provision of Integrated Facilities Management, M&E and Building Maintenance Services (Multi-Lot)
Provision of Integrated Facilities Management, M&E and Building Maintenance Services (Multi-Lot) Dublin Port Company (“DPC”) is the contracting authority for this procurement. DPC is a State-owned, self-financing Designated Activity Company responsible for the management, operation and development of Dublin Port, Ireland’s premier port. In 2025, the Port handled circa 36 million gross tonnes, 6,649 ship arrivals and 1.7 million passengers. DPC intends to engage in a competitive process for the establishment of a multi -Lot (3) single-party framework agreement with an initial three (3) year period with an option for an additional one (1) year extension on four (4) occasions to a maximum of seven (7) years. The intention is to establish three separate multi-party framework agreements, one in respect of each Lot. Economic operators may tender for one, several or all Lots, and may be awarded more than one Lot. Details of Lots are as follows. Lot 1 – Cleaning (€950k per annum) This Lot will cover the provision of comprehensive cleaning and hygiene services across Dublin Port Company facilities, including Terminals 1, 2, 5 and 6, Harbour Office, P7 Headquarters, M&S Building, Oil Zone, Dublin Inland Port and ancillary buildings. The scope includes routine daily, weekly and periodic cleaning of offices, passenger terminals, toilets, kitchens, showers, public areas, external grounds and waste management, together with specialist services such as window cleaning, carpet shampooing, floor restoration, deep cleans and high-level cleaning. Contractors must provide trained staff, comply with all site safety and security requirements, supply toiletries and consumables, manage feminine hygiene services, and maintain detailed cleaning schedules and reporting. The tender also includes optional ancillary services for pest control, water hygiene monitoring and Legionella compliance, road sweeping operations, litter picking, weed control and grass cutting. Particular emphasis is placed on maintaining high standards in public-facing passenger areas, responding to fluctuating ferry traffic demands, and ensuring compliance with health, safety, environmental and security requirements across the port estate. Lot 2 - HVAC, M&E Maintenance (€460k per annum) Lot 2 covers light M&E maintenance and repair services across DPC’s port estate, including buildings, terminals, access systems, fire safety systems and HVAC equipment. The successful contractor will be responsible for planned preventative maintenance, reactive repairs, emergency callouts and compliance inspections, with particular focus on critical operational assets supporting port traffic and IT facilities. Services must be delivered in accordance with relevant Irish and European standards, with detailed reporting and maintenance records uploaded to DPC’s PEMAC asset management system. Contractors must provide suitably qualified personnel, comply with strict health, safety and security requirements, attend regular performance meetings, maintain adequate staffing and equipment, and ensure all works are carried out with minimal disruption to port operations. Lot 3- General Building Maintenance (€200k per annum) Lot 3 covers planned and reactive building fabric maintenance across DPC’s estate, including internal and external building elements, drainage and associated external areas. The contract is structured around call-out rates, emergency response, material mark-up and access costs, with contractors required to undertake inspections, condition surveys, fault investigations, repairs, replacements and minor refurbishment works to maintain the integrity, safety and appearance of the buildings and surrounding infrastructure. The scope also includes drainage and plumbing repairs, pavement and fencing works, waste disposal of arisings and the provision of access equipment such as MEWPs or scaffolding where required. To promote responsible and sustainable supply chain www.dublinport.ie practices in line with industry best practice, DPC has partnered with Achilles, a leading global provider of supply chain risk management services. Achilles Supply Line has operated in Ireland for over 25 years and will be used as a qualification system for this competition. DPC is conducting its qualification stage for this competition via the Achilles Supply-Line Platform. DPC may invite all qualified firms to tender or reserves the right to carry out a further qualification stage to reduce the number of firms to be invited. To express interest and participate, please register, subscribe and complete your questionnaire as detailed below. Organisations that are not currently registered on Achilles Supply-Line are invited to express their interest by contacting via email or [email protected] or [email protected] directly via phone at +44 (0) 1235 861118 and to register for the Supply-Line Silver Plus membership via the following link - https://my.achilles.com/join-community?communitycode=SUP&lang=en-gb&buyerid=00013760&minimumpackage=SLP. Organisations already registered on Achilles Supply-Line must ensure that: (i) their registration is valid; (ii) the relevant codes listed below are included in their profile, and (iii) their questionnaire information is complete and up to date. The relevant Supply-Line codes are: 2.45.19 Facilities Management (ALL LOTS), 3.99.29 Industrial Cleaning Services (LOT 1), 3.78.1 Control & Instrumentation Services (LOT 2) and 3.70.15 Building/Office Maintenance and Refurbishment Services (LOT 3). Suppliers must ensure they are registered against these codes to ensure they are identified as a potential bidder. Interested parties should be fully registered on the system before close of business on Friday 31st July 2026 to be considered for the competition. - TenneT TSO GmbHBayreuthFrist: 30. Juni
Framework Agreement for the Delivery of Control Systems (IEC104) and the Provision of related services
Framework Agreement for the Delivery of Control Systems (IEC104) and the Provision of related services TenneT is a leading European transmission system operator responsible for the safe and reliable transmission of electrical energy over long distances. TenneT’s core tasks include the expansion and maintenance of the transmission grid, the integration of renewable energy sources, and the assurance of grid stability. TenneT’s grid area covers large parts of Germany and the Netherlands and includes both onshore and offshore connections. As an operator of critical infrastructure, the security and reliability of the systems in use are of particular importance. The aim of this tender is the establishment of two framework agreements for the procurement of substation Control Systems, in particular Intelligent Electronic Devices (IEDs) and field control units, for use in TenneT TSO GmbH’s (TTG) high‑voltage and extra‑high‑voltage substations. The systems to be procured are intended for control, monitoring, signalling and automation purposes within substations and are a key element of secure and reliable grid operation. Within the scope of this tender, TTG intends to procure Control System components including, but not limited to, bay control units, station control units, interface devices, and related auxiliary equipment. A central focus of the procurement is the use of the communication protocol IEC 60870‑5‑104 (IEC 104) for the exchange of control, status and measurement data between the substation level and higher‑level control systems. The devices shall support typical substation automation functions, reliable IEC 104 communication, and seamless integration into existing station control concepts in accordance with applicable technical standards. The subject of this tender is the supply of Control Systems hardware, including IEDs and associated components, as well as related documentation and services necessary for commissioning and integration into TTG’s substations. The framework agreement shall enable TTG to call off devices on demand over the contract term for new installations, refurbishments, and replacement purposes. Parallel to the hardware framework agreement, TTG intends to conclude a separate service contract covering the maintenance of the devices and the maintenance of embedded software, including corrective and preventive measures as well as software updates and upgrades, in accordance with the contractual provisions. Due to increasing requirements regarding system availability and redundancy, the procurement procedure is structured into two lots, which will be awarded separately. The lot structure is intended to ensure supply security, operational resilience and redundancy of the Control Systems deployed within TTG’s transmission grid. TenneT TSO GmbH is certified according to ISO 27001. Therefore, only Control Systems and equipment that comply with TTG’s Operational Technology security requirements may be offered (OT security and IT security requirements). Tender Documents To participate in the tender, please complete the Non‑Disclosure Agreement below and send it via email to: [email protected] Access to the additional tender documents will be granted immediately upon receipt and review of the document. TenneT TSO GmbH will treat the documents you submit and the trade and business secrets contained therein as confidential in accordance with Section 5 of the Sector Ordinance. - TenneT TSO GmbHBayreuth
Framework Agreement for the Delivery of Control Systems (IEC104) and the Provision of related services
Framework Agreement for the Delivery of Control Systems (IEC104) and the Provision of related services TenneT is a leading European transmission system operator responsible for the safe and reliable transmission of electrical energy over long distances. TenneT’s core tasks include the expansion and maintenance of the transmission grid, the integration of renewable energy sources, and the assurance of grid stability. TenneT’s grid area covers large parts of Germany and the Netherlands and includes both onshore and offshore connections. As an operator of critical infrastructure, the security and reliability of the systems in use are of particular importance. The aim of this tender is the establishment of two framework agreements for the procurement of substation Control Systems, in particular Intelligent Electronic Devices (IEDs) and field control units, for use in TenneT TSO GmbH’s (TTG) high‑voltage and extra‑high‑voltage substations. The systems to be procured are intended for control, monitoring, signalling and automation purposes within substations and are a key element of secure and reliable grid operation. Within the scope of this tender, TTG intends to procure Control System components including, but not limited to, bay control units, station control units, interface devices, and related auxiliary equipment. A central focus of the procurement is the use of the communication protocol IEC 60870‑5‑104 (IEC 104) for the exchange of control, status and measurement data between the substation level and higher‑level control systems. The devices shall support typical substation automation functions, reliable IEC 104 communication, and seamless integration into existing station control concepts in accordance with applicable technical standards. The subject of this tender is the supply of Control Systems hardware, including IEDs and associated components, as well as related documentation and services necessary for commissioning and integration into TTG’s substations. The framework agreement shall enable TTG to call off devices on demand over the contract term for new installations, refurbishments, and replacement purposes. Parallel to the hardware framework agreement, TTG intends to conclude a separate service contract covering the maintenance of the devices and the maintenance of embedded software, including corrective and preventive measures as well as software updates and upgrades, in accordance with the contractual provisions. Due to increasing requirements regarding system availability and redundancy, the procurement procedure is structured into two lots, which will be awarded separately. The lot structure is intended to ensure supply security, operational resilience and redundancy of the Control Systems deployed within TTG’s transmission grid. TenneT TSO GmbH is certified according to ISO 27001. Therefore, only Control Systems and equipment that comply with TTG’s Operational Technology security requirements may be offered (OT security and IT security requirements). Tender Documents To participate in the tender, please complete the Non‑Disclosure Agreement below and send it via email to: [email protected] Access to the additional tender documents will be granted immediately upon receipt and review of the document. TenneT TSO GmbH will treat the documents you submit and the trade and business secrets contained therein as confidential in accordance with Section 5 of the Sector Ordinance. - TenneT TSO GmbHBayreuth
Framework Agreement for the Delivery of Control Systems (IEC104) and the Provision of related services
Framework Agreement for the Delivery of Control Systems (IEC104) and the Provision of related services TenneT is a leading European transmission system operator responsible for the safe and reliable transmission of electrical energy over long distances. TenneT’s core tasks include the expansion and maintenance of the transmission grid, the integration of renewable energy sources, and the assurance of grid stability. TenneT’s grid area covers large parts of Germany and the Netherlands and includes both onshore and offshore connections. As an operator of critical infrastructure, the security and reliability of the systems in use are of particular importance. The aim of this tender is the establishment of two framework agreements for the procurement of substation Control Systems, in particular Intelligent Electronic Devices (IEDs) and field control units, for use in TenneT TSO GmbH’s (TTG) high‑voltage and extra‑high‑voltage substations. The systems to be procured are intended for control, monitoring, signalling and automation purposes within substations and are a key element of secure and reliable grid operation. Within the scope of this tender, TTG intends to procure Control System components including, but not limited to, bay control units, station control units, interface devices, and related auxiliary equipment. A central focus of the procurement is the use of the communication protocol IEC 60870‑5‑104 (IEC 104) for the exchange of control, status and measurement data between the substation level and higher‑level control systems. The devices shall support typical substation automation functions, reliable IEC 104 communication, and seamless integration into existing station control concepts in accordance with applicable technical standards. The subject of this tender is the supply of Control Systems hardware, including IEDs and associated components, as well as related documentation and services necessary for commissioning and integration into TTG’s substations. The framework agreement shall enable TTG to call off devices on demand over the contract term for new installations, refurbishments, and replacement purposes. Parallel to the hardware framework agreement, TTG intends to conclude a separate service contract covering the maintenance of the devices and the maintenance of embedded software, including corrective and preventive measures as well as software updates and upgrades, in accordance with the contractual provisions. Due to increasing requirements regarding system availability and redundancy, the procurement procedure is structured into two lots, which will be awarded separately. The lot structure is intended to ensure supply security, operational resilience and redundancy of the Control Systems deployed within TTG’s transmission grid. TenneT TSO GmbH is certified according to ISO 27001. Therefore, only Control Systems and equipment that comply with TTG’s Operational Technology security requirements may be offered (OT security and IT security requirements). Tender Documents To participate in the tender, please complete the Non‑Disclosure Agreement below and send it via email to: [email protected] Access to the additional tender documents will be granted immediately upon receipt and review of the document. TenneT TSO GmbH will treat the documents you submit and the trade and business secrets contained therein as confidential in accordance with Section 5 of the Sector Ordinance. - RailStock Finland OyHELSINKIFrist: 23. Aug.
Technical Consultancy Services Related to Rolling Stock
BACKGROUND AND PURPOSE OF THE PROCUREMENT RailStock Finland Oy (hereinafter “Railstock”) is launching a tendering procedure for technical consultancy services related to the rolling stock it manages. The purpose of this procurement is to establish a framework for obtaining high‑quality, independent technical consultancy services that support Railstock in the management, development and procurement of rolling stock used in publicly funded passenger rail services in Finland. CONTRACTING ENTITY Railstock Finland Oy is a company wholly owned by the State of Finland, which manages, develops and leases passenger rolling stock for publicly funded passenger rail services in Finland. The objective of the company is to ensure that the rolling stock used in contracted services is safe, modern, low‑emission and available to all operators on equal and transparent terms, so that competition in rail transport and sustainable modes of transport can develop. Railstock is responsible for the preparation and implementation of new rolling stock procurements, for lifecycle management of the rolling stock and for long‑term investment planning. The company began operating as an independent company under the ownership steering of the Prime Minister’s Office in November 2025, and practical operational activities have commenced during 2026 as rolling stock used in contracted services, transferred from VR and other parties, is brought into the company’s ownership. SCOPE OF THE PROCUREMENT The subject matter of the procurement is a comprehensive package of technical expert and consultancy services related to rolling stock, supporting the rolling stock owner in, inter alia, technical assessments, procurement preparation, lifecycle management, planning of maintenance and heavy overhauls, safety and approval matters, as well as other expert tasks connected with the ownership and development of rolling stock. Railstock has divided the procurement into the following lots: 1. Owner’s Engineer Support 2. Procurement Support (Rolling Stock) 3. Lifecycle, LCC & Fleet Strategy 4. Safety, Regulation & ECM Certification 5. Testing, Acceptance, Audits & QA 6. Maintenance, Overhaul & Modification Procurement 7. ESG Reporting 8. IT Systems, Network Architecture & Cybersecurity 9. Technical Design (Electrical & Mechanical) 10. ETCS Retrofit & Upgrade Procurement Support 11. Rolling Stock Documentation Management & DMS Support The lots and the services to be procured under each lot are described in more detail in the invitation to tender and its annexes, which also set out Railstock’s requirements concerning the suitability of tenderers and the minimum requirements applicable to the services. PROCUREMENT DOCUMENTS The procurement documents consist of the following documents: - This contract notice - Annex 1: Draft Agreement - Annex 1.1: Data Protection, Information Security and Confidentiality Annex - Annex 1.2: Sanctions undertakings - Annex 2.1: Service description, Lot 1 - Annex 2.2: Service description, Lot 2 - Annex 2.3: Service description, Lot 3 - Annex 2.4: Service description, Lot 4 - Annex 2.5: Service description, Lot 5 - Annex 2.6: Service description, Lot 6 - Annex 2.7: Service description, Lot 7 - Annex 2.8: Service description, Lot 8 - Annex 2.9: Service description, Lot 9 - Annex 2.10: Service description, Lot 10 - Annex 2.11: Service description, Lot 11 - Annex 3.1: Tender Form, Lot 1 - Annex 3.2: Tender Form, Lot 2 - Annex 3.3: Tender Form, Lot 3 - Annex 3.4: Tender Form, Lot 4 - Annex 3.5: Tender Form, Lot 5 - Annex 3.6: Tender Form, Lot 6 - Annex 3.7: Tender Form, Lot 7 - Annex 3.8: Tender Form, Lot 8 - Annex 3.9: Tender Form, Lot 9 - Annex 3.10: Tender Form, Lot 10 - Annex 3.11: Tender Form, Lot 11 - Annex 4: Subcontractors, capacity‑providing entities and members of a group of tenderers PROCUREMENT TIMETABLE - Deadline for requests for additional information: 9 August 2026 - Answers to requests for additional information: at the latest 6 days before the tender submission deadline (target date: 12 August 2026) - Tender submission deadline: 23 August 2026 After this, the procurement will proceed according to the following indicative timetable: - Notification of the contract award decision: 18 September 2026 - Signing of the contract and start of the contract period: 9 October 2026
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Department of Contracts.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.