Finnish Meteorological InstituteHelsinkiTED
Multisensor weather stations
The procurement includes 40 units of multi-sensor weather stations that measure several key meteorological parameters, such as air temperature, relative humidity, wind, and [solar] radiation. The weather stations will form a comprehensive urban climate measurement network in Helsinki and the wider Helsinki Metropolitan Area. The weather s...
Angebotsfrist: 17. Juni 2026 (abgelaufen)Typ: Ausschreibung
Messtechnik
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Finnish Meteorological Institute
- Veröffentlicht:
- 18. Mai 2026
- Frist:
- 17. Juni 2026
- Thema:
- Messtechnik
Ausschreibungsbeschreibung
Vollständige Beschreibung anzeigenBeschreibung einklappen
The procurement includes 40 units of multi-sensor weather stations that measure several key meteorological parameters, such as air temperature, relative humidity, wind, and [solar] radiation. The weather stations will form a comprehensive urban climate measurement network in Helsinki and the wider Helsinki Metropolitan Area. The weather stations must be operable in Arctic environmental conditions, providing system stability according to specified requirements. Mandatory requirements for the weather stations are described in this tender request document and in detail in annex 1: General description. The weather stations 40 units to be acquired is a one-time purchase plus possible option purchase. The weather stations 40 units must be delivered by latest 31.10.2026. Annexes: annex 1: General description annex 2: the draft supply agreement annex 3: JYSE 2025 SUPPLIES General Terms of Public Procurement in Supply Contracts
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
6 Datenbereiche verfügbar
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Unterlagen
Freischalten50 Angaben erfasstUnterlagen · Dokumentenpaket
Auftraggeber
Freischalten3 Angaben erfasstAuftraggeber · Anschrift · Kontakt
Lose
Freischalten1 Angabe erfasstLose LOT-0000
Verfahrensdaten
Freischalten5 Angaben erfasstBekanntmachungsnummer · Verfahrensreferenz · Verfahrensart · Auftragsart · +1 weitere
Ausführungsorte
Freischalten2 Angaben erfasstAusführungsorte
Veröffentlichungsstelle
Freischalten3 Angaben erfasstVeröffentlichungsstelle · Anschrift · Kontakt
Ähnliche Bekanntmachungen
9MI-CFT26-018 - Call for Tenders for the provision of Aanderaa weather station instrument calibration and service / repair services
Marine Institute_1141GalwayFrist: 12. JuniThe Marine Institute would like to invite tender from interested economic operators for the provision of Aanderaa weather station instrument calibration and service / repair services to the Marine Institute, Rinville, Oranmore, Co. Galway.Agreement regarding Biometric Stations
UdenrigsministerietKøbenhavn KThe contracting entity has conducted a tender with the following description: I) Background and purpose The Danish Ministry og Foreign Affairs (“MFA)” comprises the Ministry located in Copenhagen and a global network of embassies, consulates-General and Trade Commissions. The MFA wishes to conclude an agreement with one supplier regarding the delivery, support and maintenance of both stationary and mobile biometric stations. The biometric stations shall support the process related to issue of primarily passports at the MFA’s embassies around the world. The agreement regulates the development, delivery, support, and maintenance of the biometric stations. II) Main Services: The agreement covers the following main services: A) Implementation Services B) Delivery of biometric stations C) Maintenance and support A: Implementation Services The Supplier shall commence the delivery of Implementation Services immediately upon signing the Agreement. These services shall ensure that the Supplier can deliver biometric stations that are compatible with the Customer’s IT environment and support the intended use of the Biometric Stations. The Implementation Services include: a. Delivery of one Stationary Biometric Station b. Delivery of one Mobile Biometric Station c. Development and delivery of an API for installation on the Operator’s PCs. The API shall control the Stationary Biometric Station via a user interface for the Operator. d. Integration with the Customer’s operations provider (Statens IT) e. Delivery of Documentation f. Training of the Customer’s technical personnel The Implementation Services shall be delivered with due involvement of the Customer’s staff. Regardless, the Supplier is responsible for the overall planning and management of the process. B: Delivery Biometric Stations The Supplier shall deliver Stationary Biometric Stations and Mobile Biometric Stations for capture of biometrics for primarily passports. Stationary Biometric Stations shall mean a stationary device that uses embedded components to capture of photo, fingerprint, and signature of a person in at least a seated position. The Stationary Biometric Station shall be mounted to wall or floor depending on the individual operating scenario where the station shall be put into operation. The Customer expects to buy 100 stationary biometric stations during the term of the Agreement. Mobile Biometric Stations shall mean a mobile device that uses embedded components to capture photo, fingerprint, and signature of a person in at least a seated position. The size and shape of the mobile station allows it to be taken with you when travelling by car, bus, train, boat, and plane, for example. The Customer expects to buy 70 mobile biometric stations during the term of the Agreement. The Biometric stations shall include all parts such as computer/tablet, light stand, background etc. to the extent necessary in order to capture biometrics of a quality which comply with the requirements stated in the Agreement. C: Maintenance and support The Supplier shall provide support and maintenance for delivered Biometric Stations, covering all parts of the stations, including both hardware and software. Maintenance includes all proactive actions necessary to ensure that the solution operates in compliance with the requirements. This encompasses ongoing technical maintenance, preventive measures, and updates. Support includes all reactive actions arising from incidents or other support inquiries. The support shall address all types of questions related to the Biometric Stations and must include the possibility to provide support via video calls. The Supplier shall expect to collaborate with the Customer's operational supplier and technicians related to support and maintenance. In case of incidents requiring the replacement of components, the Supplier shall deliver the necessary components to the Customer, who will handle the replacement using its own technical staff. *** In general, reference is made to the tender material for more information.Acquisition of Cold Weather Boots to the Danish Defence
Danish Ministry of Defence Acquisition and Logistics OrganisationBallerupFrist: 18. JuniThe Danish Ministry of Defence Acquisition and Logistics Organisation (DALO) wishes to renew the framework agreements concerning the military Combat Boot system. The system consists of 7 framework agreements including specific boots and an assortment of various related footwear whereas this Contract Notice covers the Cold Weather Boots. The Cold Weather Boot shall be for use in cold and dry environment on Greenland and similar areas. DALO is looking for a Cold Weather Boot with a removable warm inner boot and with a sole for use in icy environments like artic areas and similar. The inner boot shall be replaceable. The Cold Weather Boot shall be offered in 2 different versions. The Primary version is for normal military use in very cold and dry environment and the second version is for use in the same area but it shall be possible to use with Cross Country skis 90mm wire bindings. Only the primary version will be evaluated. The Cold Weather Boots must have a lifetime of minimum 12 months of military use. To fully understand the requirements of the Cold Weather Boots see Appendix 1 in the tendering material. The evaluation of the boots includes tests of products samples. DALO is only looking for high quality boots, and after the tenderer has made his best and final offer (BAFO) the offered boot must reach a minimum quality level threshold of at least 7,3 (from 0-10) to continue in the final tendering procedure. DALO reserves the right to award the Agreement based on the INDO1 or on any additional INDOs. In that case DALO will request receipt of all product samples mentioned in Enclosure E – DALO’s test schedule and procedure for testing and evaluation in accordance with Enclosure C – The award criterion and evaluation method - that otherwise should be submitted in connection with BAFO if DALO chooses to award the Agreement based on INDO1 or on any additional INDOs. This also means complying with the minimum quality level threshold. This tender is part of DALO’s larger acquisition of Combat Boots. The total acquisition consists of 5 individual tendering procedures and a total of 7 agreements: 1 tender for combat boots with 2 winners (2 parallel framework agreements) 1 tender for patrol boots with 2 winners (2 parallel framework agreements) 1 tender for desert boots 1 tender for cold weather boots 1 tender for combat safety boots If a Candidate/Tenderer wants to make an application/offer for one of the other agreements, the Candidate/Tenderer has to put forward the application/offer in the respective tendering procedure regarding that specific boot. One (1) Candidate can only make one (1) application in each tendering procedure.145 kV (132 kV) SF6 free gas insulated connection system to Øygarden connection station.
BKK ASBergenFrist: 30. JuniThe procurement is for the complete delivery, installation and commissioning of 1 145 kV SF6-free gas insulated switching system (GIS) with 9 double switch lanes and a double compilation rail. to Øygarden connection station. The procurement is for BKK's bays, including Blomøy and Energiparken, as well as an option for future bays (Energiparken Nord, Energiparken Sør and 2nd "future"). Øygarden connection station is a joint station between BKK AS and Statnett SF. In accordance with the Builder Agreement between the parties (dated 03.05.2023), the BKK shall in addition establish 3 145 m2 transformer fields on behalf of Statnett, which is included as an option for the procurement. The ownership of these fields will be transferred to Statnett upon take over. The contract with the supplier will be signed by both BKK and Statnett, c.f. the Builder Agreement point 11.2.De technical requirements are in statnett ́s specificationS SDOK-41-34 (Special Specification) and SDOK-41-38 (General Specification), which are applicable for this procurement. Details of the delivery are in Annex 01 - Work Description and other annexes. The procurement will be carried out in two stages. Tenderers are asked to submit a qualification request by 30.06.2026, 12.00 in Mercell. Up to 3 qualified tenderers will be invited to the tender phase and negotiations.Operation of recycling stations and environment stations with disposal of received waste, as well as operation of the loading station at Rygg.
Vestfold Avfall og Ressurs ASSemFrist: 01. Sept.The contracts are for the operation of recycling stations and environment stations for receiving waste and maintnance of them. The objective of the procurement is that the receipt and management of waste and subsequent treatment occurs in an efficient and environmentally friendly manner, where the needs of the inhabitants and other customers are safeguarded, and that we contribute to reaching Vesars and the owner municipalities ́ goal of 85 % material recycling by 2035. This is reflected through the absolute requirements, emphasis in award criteria and possibility for innovation and development contracts. Vesar would like to stimulate the use of biogas as a replacement for fossile fuel by transporting the waste fractions and for other types of transport work. The biogas that is used shall preferably originate from production with high net climategas reductions. New contracts shall be signed for the operation of the recycling and environment stations in the owner municipalities, As well as for the operation of the reloading station at Rygg when signing the following sub-contracts: Sub-contract 1 - Recycling stations in the northern area: Lersbrygga Nordre Foss Skoppum Sub-contract 2 - Recycling stations mid area and environmental stations: Rygg Lofterød Environment stations for hazardous waste (unmanned stations) The loading station at Rygg Sub-contract 3 – Recycling stations in the south area: Grinda Sogn Delkontrakt 1 and 3 involves the operation of the recycling stations. In sub-contract 2, the collection of hazardous waste is also located from and the operation of Vesar's 23 environment stations, which are distributed over the owner municipalities, as well as the operation of the loading station at Rygg. The tenderer is responsible for environmentally good waste disposal systems. Detailed description of the assignment and the contract terms are given in the requirement specifications and the other documents in the tender documentation.Gorey Garda Station Cell Upgrade and Prisoner Processing Unit works
Office of Public Works (OPW)TrimUpgrade of two existing cells and Prisoner Processing Unit works at Gorey Garda StationProcurement - Fire station, 2026
Ålesund kommunale eiendom KFÅlesundFrist: 19. JuniThe aim of the procurement is to enter into a contract with one tenderer for a turnkey contract for the construction of a new fire station at Lerstadveien 525 in Ålesund (previously Bertel O. Steen). The project partly includes new buildings and partly renovation and reuse of the existing buildings. A new exit for turn-out vehicles shall be established. The turnkey contract will include several disciplines. The contract is planned for autumn 2026, provided that the contract is awarded and it is signed, cf. Part 0, point 2.1.3. The construction start is planned for week 8 2027, with completion in week 49 2028.Mobile Jerrycan Filling Stations (MJFS)
Ministerie van DefensieUtrechtThe Dutch Army is replacing one obsolete Mobile Jerrycan Filling Station (MJFS) and acquiring three additional identical units (four total). An MJFS is a 20-ft ISO container that automatically empties, cleans, and refuels jerry-cans with diesel or kerosene, has its own generator, is operated by a crew of two, processes >120 cans/hour, and is transportable by truck with CHU. Single-source procurement is chosen to align with the German division, ensuring interoperability, standardized logistics, maintenance, and training, reducing administrative burdens and costs.Framework for the manufacture and supply of stations for Borgarlína
Betri Samgöngur ohfReykjavíkFrist: 30. JuniBetri samgöngur requests tenders for a single-supplier framework agreement for the manufacture and delivery to Iceland of station equipment for Borgarlína, including canopies, technical cabinets, pylons, benches, waste bins, digital screens and related components. The procurement includes 26 stations for Lota 1 and optional additional stations for later phases. For further information, see the tender documents.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 17. Juni 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Finnish Meteorological Institute.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.