Our Lady’s Meadow Primary SchoolDurrowTED
MEchanical Upgrade Works to Our Lady of Meadows School, Durrow, Co. Laois. R32 FW18
EWS 2026 Mechanical upgrading works to Our Lady of Meadows, Durrow, Co. Laois. R32 FW18. The works entail the replacement of the existing space heating services throughout the existing building. Refer to the drawings and specifications for further information on the works to be carried out.
Angebotsfrist: 09. April 2026 (abgelaufen)Typ: Ausschreibung
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
EWS 2026 Mechanical upgrading works to Our Lady of Meadows, Durrow, Co. Laois. R32 FW18. The works entail the replacement of the existing space heating services throughout the existing building. Refer to the drawings and specifications for further information on the works to be carried out.
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Our Lady’s Meadow Primary School
- Veröffentlicht:
- 19. März 2026
- Frist:
- 09. April 2026
- Bauobjekt:
- Schule
Bauobjekt-Klassifikation
- SchuleHauptobjekt
Ausschreibungsbeschreibung
EWS 2026 Mechanical upgrading works to Our Lady of Meadows, Durrow, Co. Laois. R32 FW18. The works entail the replacement of the existing space heating services throughout the existing building. Refer to the drawings and specifications for further information on the works to be carried out.
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
7- Saint Anne’s National SchoolCastlereaFrist: 11. Juni
EWS26 Electrical Upgrade Works at St Anne's Convent NS The Square Castlerea Co Roscommon
EWS26 Electrical Upgrade Works to St Anne's Convent NS The Square Castlerea Co Roscommon. The works entail replacement of the existing electrical services throughout the building,. Refer to the attached documents for further information on the works to be carried out. - St. Brigid's Girls' SchoolDublin 18Frist: 06. März
Electrical Upgrade Works to St Brigid's Girls School The Park Cabinteely Dublin 18
EWS26 Electrical Upgrade Works to St Brigid's Girls School The Park Cabinteely Dublin 18. The works entail the full electrical upgrade of the electrical installations (general lighting, emergency lighting, fire alarm etc) throughout the building. Refer to the drawings and specifications for further details. - Lisnagry National SchoolLimerickFrist: 08. Juni
Proposed Roof and Internal Upgrade Works, at Lisnagry National School, Lisnagry, Limerick
The works comprise the removal and replacement of the existing flat roof and mono-pitched roof to the existing school building,including all associated roof coverings, insulation, membranes,flashings, and related roofing components. The works shall also include the removal and replacement of existing rooflights to affected areas, complete with insulated upstands, flashings, and integration with the new roof system to ensure a weather-tight and thermally efficient installation. In addition, provide for the replacement and upgrade of the existing rainwater drainage system, including gutters, downpipes, outlets, box gutters, and all associated fittings. Internal painting shall also be carried out to all affected areas resulting from the roof replacement works, including preparation and painting of ceilings, walls, and adjoining surfaces as required, together with all making good. - Our Lady of Lourdes Secondary School (Rosbercon)Rosbercon, New Ross, WexfordFrist: 20. Feb.
Climate Action REPowerEU Schools Energy Retrofit Pathfinder Programme 2026 - Works Contractors Notice - Our Lady of Lourdes Wexford - Roll No: 63630O
Energy retrofit upgrades to Our Lady of Lourdes School in Rosbercon, New Ross, Co. Wexford. The project is part of the EU REPowerEU Schools Energy Retrofit Pathfinder Programme 2026, funded through the National Recovery and Resilience Facility. It aims to deliver significant energy improvements to selected buildings in the region as part of the EU's plan to reduce dependence on Russian fossil fuels and accelerate the green transition. - SmartPly Europe DACSlieveureFrist: 05. Juni
RFT to Modify + Install Upgraded Air Extraction Duct Work on our Coating Line T+G Area at SmartPly Europe DAC ‘26
SMARTPLY Europe DAC is seeking suitably qualified engineering companies to modify and install an upgraded Air Extraction Duct system in the Coating Line and T+G (Tongue + Groove) area of the plant at our site in Belview Port, Slieverue, via Waterford (X91 PX75). This system is required to improve airflow in the ducts and provide separate Bag House connections for each production line. All ducting and final detailed drawings will be supplied by Scheuch GmbH (Free Issue to the Contractor). The Contractor is responsible for all installation, bracketry, lifting, safety documentation, and associated works as detailed below. It is envisaged that the works will take place during SmartPly’s Annual Shutdown: 24th August – 4th September 2026, with pre-shutdown works permitted in the weeks prior. Due to the nature of works as set out in this tender and other maintenance + construction activity being carried out on site, these have been deemed to be "CONSTRUCTION WORK" as per the HSA's Safety, Health and Welfare at Work (Construction) Regulations 2013. The successful Bidder will operate as "CONTRACTOR" and will be required to provide site-specific Risk Assessments, Method Statements, Training + Induction Records, Plant Certification, Lift Plans, and other requested information associated with the works. Client: SmartPly – Belview Port, Slieverue, via Waterford. Contact: Ciaran Brennan – 051 831 48 PSCS Successful Bidder Detailed Scope of Works The Contractor shall provide all labour, plant, lifting equipment, access platforms, bracketry, fixings and safety documentation necessary to complete the following works: Ducting Installation + Modification (Based on Drawing AT-03570328a) • Install and modify ducting as per Scheuch GmbH drawings (green = existing, black = new). • Remove existing ducting (Ø630mm) running from the Coating Line to Bag House 01 (BH01). • Replace with new reduced-size ducting (Ø400mm) running from the T+G Line to BH01. • Install new ducting (Ø630mm) running from the Coating Line to Bag House 04 (BH04), connecting into existing ducting (Ø710mm). • Remove the ducting line fitted under the existing Ø710mm line and blank off the opening. • Install new ducting of various diameters from the Splitter Saw to BH01, connecting into the lower extraction from the two Tenor machines and the QC Saw. Removal of Existing Ducting • Removal of existing ducting. Note: This shall be recorded in the RAMS for prior approval. Lifting Equipment + Access Platforms • The Contractor is responsible for all plant, lifting equipment, and access platforms (temporary, mobile, or fixed) required to carry out the works at heights of up to 19m above ground level. Start-Up Support + Commissioning • Provide start-up support. • Offer technical support for commissioning team. Handover Documentation The Contractor shall provide: • Site-specific Risk Assessments + Method Statements (RAMS) – to be issued 21 days prior to shutdown work commencing. • Lift plans and associated safety documentation. • Training + Induction Records. • Plant Certification. • As-installed documentation (if any variation from Scheuch drawings). Health + Safety Compliance The Contractor is responsible for all EHS requirements associated with the works, including but not limited to: • Complying with site rules and the safety + health plan. • Identifying hazards and eliminating or reducing risks. • Providing site-specific induction for all workers. • Appointing a safety officer where more than 20 persons are on site. • Reporting accidents to the Authority and to the PSCS where an employee cannot perform normal work for more than three days. All works must comply with: • Safety, Health and Welfare at Work Act 2005 • General Application Regulations 2007 • Construction Regulations 2013 - Dublin City CouncilDublinFrist: 22. Mai
Contract for the execution of the Building Works designed by the Employer relating to Dublin City Council's redevelopment of Dalymount Park, Phibsborough
Redevelopment of Dalymount Park into a UEFA Category 3 stadium with capacity for 8,039 spectators (6,245 seated, 1,794 standing). Works include demolition of existing structures, site investigation, and new construction of stands, player/match official facilities, media/broadcasting infrastructure, hospitality and community spaces, building services (MEP), and external/site works. This is the first stage of a competitive procedure: interested parties submit a Suitability Assessment Questionnaire (SAQ). Following evaluation, the top 5 scoring applicants meeting minimum criteria will be invited to tender. 10004174 - Engineering support for the development of up to three PtL pilot plants in up to three countries
The International Power-to-X Hub supports the transition to climate-neutral industries and economies by advancing sustainable Power-to-X solutions in sectors where direct electrification is not yet feasible, especially aviation, maritime transport and energy-intensive industries. The project is implemented by Deutsche Gesellschaft fuer Internationale Zusammenarbeit (GIZ) GmbH on behalf of the German Federal Ministry for the Environment, Climate Action, Nature Conservation and Nuclear Safety (BMUKN). It is financed through the International Climate Initiative as part of Germany"s hydrogen and Power-to-X policy framework. Power-to-X enables the production of fuels and chemical feedstocks from renewable electricity and sustainable carbon or nitrogen sources and therefore helps replace fossil-based inputs while supporting climate protection, industrial transformation and sustainable economic development. The subject of this tender is providing technical support for the development of up to three Power-to-Liquid pilot plants in up to three countries. The assignment provides up to three industrial partner companies with customised engineering documents and advisory services to advance PtL pilot plant projects to FEED/EPC tendering stage. The requested services cover the full project development pathway from concept definition and selection through comparative techno-economic feasibility assessment and conceptual engineering to advice on procurement and tender strategy and, where required, support for the preparation of functional FEED/EPC tender documents. The contract is structured into four work packages in two implementation steps. In Work Packages A and B, the contractor shall review existing concepts and documentation, consult each partner, refine or propose PtL plant concepts, advise on feedstock and utility sourcing, process technologies, offtake markets, regulation and certification, conduct kick-off meetings and site visits, and prepare Concept and Site Analysis Reports with comparative assessments and recommendations. The contractor shall also deliver partner trainings and prepare comparative techno-economic feasibility studies for up to two plant concepts per partner, including a book of assumptions, process simulation, technical descriptions, preliminary process flow diagrams, equipment sizing, interface definitions, certification compliance assessment, CAPEX and OPEX estimates, economic modelling, risk analysis and concept recommendations. Preliminary results shall be discussed with each partner in an interactive workshop to validate assumptions, review trade-offs and support concept selection. Subject to confirmation by the partner and GIZ, Work Package C covers FEL-2 conceptual engineering for the selected concept and a refined Class 4 AACE cost estimate. This includes advisory support on site development, permitting and certification, preparation of an integrated project execution plan, partner trainings on PtL process simulation and plant engineering, and an FEL-2 engineering package comprising Basis of Design specifications, process descriptions, drawings, equipment lists, preliminary equipment specifications, interface and battery limit definitions, input and output specifications, and QA/QC and HSE requirements. The engineering work shall be carried out in close coordination with the partner and GIZ and shall include advice on technology and licensor options as well as updated CAPEX estimates, economic models and key project indicators. Where sustainable CO2 supply is not readily available, the services may also include, for one project, the screening of potential sustainable carbon sources and the design of a CCU system including FEL-1 engineering package and CAPEX assessment. In a subsequent stage, the contractor shall advise on FEED/EPC procurement and tender strategy and, where required, prepare the functional tender specifications, including design basis, technical and performance specifications, scope of supply and services, site and utility information, HSE and QA/QC requirements and project schedule elements in line with the partner"s procurement framework and international standards. The contractor shall also provide advice on commercial and legal terms during tender preparation. For one partner, the services may further include support during the FEED/EPC tendering process, including bidder communication, clarification support, qualification and bid evaluation assistance, preparation of evaluation notes and support during negotiations. Throughout implementation, the contractor shall also provide cross-cutting knowledge exchange, monitoring, reporting, backstopping and coordination services.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 09. April 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Our Lady’s Meadow Primary School.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.