Aalborg UniversitetAalborg ØstTED
Laboratory precision cutting machine intended for sectioning glass specimens and other hard and brittle materials for research and development use
The Contracting Authority puts out to Tender the purchase of laboratory precision cutting machine intended for sectioning glass specimens and other hard and brittle materials for research and development use. The equipment must be suitable for reproducible, low-damage cutting and shall include motorized feed control, motorized blade heigh...
Typ: Ausschreibung
Werkzeuge, Laborinstrumente
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Aalborg Universitet
- Veröffentlicht:
- 07. Juni 2026
- Frist:
- Nicht angegeben
- Thema:
- Werkzeuge
Ausschreibungsbeschreibung
Vollständige Beschreibung anzeigenBeschreibung einklappen
The Contracting Authority puts out to Tender the purchase of laboratory precision cutting machine intended for sectioning glass specimens and other hard and brittle materials for research and development use. The equipment must be suitable for reproducible, low-damage cutting and shall include motorized feed control, motorized blade height adjustment, motorized serial sectioning, digital control of cutting parameters, a recirculating coolant system, support for diamond cut-off wheels suitable for hard and brittle materials, a blade diameter range starting around 75 mm and extending to at least 200 mm, variable blade speed of at least 300-5,000 rpm, a controlled feed rate suitable for precision cutting within a range of at least 0.3 to 180 mm/min, automated parallel serial sectioning with a minimum movement range of 40 mm, visual alignment assistance such as a laser or equivalent, and compatibility with 200-240 V, 50/60 Hz power. The complete system must be delivered to Aalborg University no later than September 1st 2026.
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
6 Datenbereiche verfügbar
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Unterlagen
Freischalten50 Angaben erfasstUnterlagen · Dokumentenpaket
Auftraggeber
Freischalten3 Angaben erfasstAuftraggeber · Anschrift · Kontakt
Lose
Freischalten1 Angabe erfasstLose LOT-0000
Verfahrensdaten
Freischalten6 Angaben erfasstBekanntmachungsnummer · Verfahrensreferenz · Referenz des Auftraggebers · Verfahrensart · +2 weitere
Ausführungsorte
Freischalten2 Angaben erfasstAusführungsorte
Veröffentlichungsstelle
Freischalten3 Angaben erfasstVeröffentlichungsstelle · Anschrift · Kontakt
Ähnliche Bekanntmachungen
10Thin section lapping and polishing equipment and thin section/sample saw (call for tenders no. 2)
Geologian tutkimuskeskusEspooA bid is requested for one (1) thin section lapping and polishing equipment and/or for one (1) thin section/sample saw. Thin section lapping and polishing equipment: The thin section lapping and polishing equipment must be capable of producing polished thin sections, thin sections with surface glass, polished sections, and glued sections made from crushed material. GTK usually uses hot plate and oven impregnating with Araldite and Petropoxy adhesives for the production of thin sections. GTK uses a mineral and polarization microscope and a micrometer to inspect the quality and thickness of the grains. GTK produces thin sections from soft rock (shale) to very hard rock types (granite), as well as glued sections from crushed stone. As a general rule, the rock types in Finland are hard. GTK has an external Pfeiffer HiScroll 46 vacuum pump for the use of thin section lapping and polishing equipment so the vacuum pump is not within the scope of this invitation to tender. The most produced sections at GTK are as follows: Polished thin section and section with surface glass, size 48 mm x 28 mm, other sizes are also possible Polished section, size varies, normally sample is round, and the size is 25 mm x 30 mm. Glued gravel section, size varies, normally sample is round, and the size is 25 mm x 30 mm. The thickness of the polished thin section must normally be 0.03 mm, uniform in thickness, and the minerals must have the correct optical color for identification. The surface of the polished thin section must be scratch-free. and/or Thin section/sample saw: Thin section/sample saw is used for sawing bulk rock samples for thin section production. The size of rock samples varies from few cm up to 20 cm in thickness. The saw must be capable of cutting samples with a diameter of at least 10 cm and thin sections sized up to 50 mm x 75 mm. GTK has an external Pfeiffer HiScroll 46 vacuum pump for the use of thin section/sample saw so the vacuum pump is not within the scope of this invitation to tender. Delivery terms & warranty for both devices: Delivery term: DDP Geological Survey of Finland, Thin section laboratory, Kuopio, Finland. Incoterms 2020. Delivery at the latest by October 30, 2026. At least a two-year warranty from the acceptance of the equipment.The Supply, Delivery and Installation of 7 Manually Operated Centre Lathe Machine Tools to TUS
Technological University of the Shannon: Midlands Midwest (TUSMM)LimerickTenders are sought for the supply, delivery, and installation of 7 manually operated centre lathe machine tools to TUS for use in the Engineering Workshop. The lathes must be of solid construction, vibration-free, and provide accurate cutting for turning, facing, drilling, and threading operations. They should be of industrial standard, typical for machine builders, medical device, pharmaceutical, automotive, aerospace, and general engineering industries.Procurement of workshop machines for the new Mosjøen high school
Nordland fylkeskommuneBODØFrist: 24. JuliNordland county is in the process of constructing a new sixth form college in Mosjøen, which shall be in use autumn 2027. The tender structure includes technology and industrial disciplines. In connection with this, some new equipment shall be procured for the department. Consto AS is the turnkey contractor in the project and is responsible for connecting the machines to water/sewage and electricity networks when a fixed installation is required. The tenderer will be subject to Consto AS ́s HSE regime at the construction site. The delivery and assembly of machines and equipment at the construction site is expected to be December 2026. Nordland county invites tenderers to submit tenders for 3+1 lathes, 2 milling machines and 4 column drilling machines, 2 strip grinding machines, 1 band saw.Provision of Robotics Equipment and Related Items to City of Dublin ETB Centres
City of Dublin Education and Training BoardDublinFrist: 04. Aug.The Contracting Authority wishes to establish a multi party framework agreement to meet its requirements for the supply of equipment for the Robotics skills education and training in City of Dublin ETB Training Centres. City of Dublin FET College is developing capacity to integrate skills training in robotics in a wide range of education and training courses including and not limited to delivery of Micro qualifications addressing skills gaps in the manufacturing industry, Pre-Engineering courses, Computer networking and computer software courses. The equipment is critical to the provision of industry focused advanced manufacturing and technology training provision and business supports to the manufacturing and technology growth sectors in Ireland.Prior Information Notice – RF On-Wafer Probe Station
Ferdinand-Braun-Institut gGmbH, Leibniz-Institut für HöchstfrequenztechnikBerlinFrist: 12. JuliThe Ferdinand-Braun-Institut (FBH) plans to procure an automated RF on-wafer probing system within the framework of the EU-funded APECS programme. The system will be used for electrical characterisation of semiconductor devices, circuits and demonstrators at wafer level. It is intended to enable high-frequency and mmWave measurements under controlled and reproducible conditions. The equipment shall support automated probing of wafers up to 200 mm in diameter and provide a versatile platform for a wide range of RF measurements. It will be installed in a cleanroom environment and integrated into existing measurement and process workflows. The procurement procedure is planned for 2026.Call for Tender for Supply, Delivery, Training and Maintenance of a Bound Metal and Continuous Fibre Fused Filament Fabrication (FFF) Machine Package to MTU Cork
Munster Technological University.TraleeFrist: 16. JuliMunster Technological University seeks tenders for the supply, delivery, training, and maintenance of one Bound Metal Filament Fused Filament Fabrication (FFF) machine with all necessary post-processing equipment to produce complete components. Further details in the RFT document.Workshop equipment for Buslanlegg Ski
Sporveien Bussanlegg ASOsloSporveien Bussanlegg AS hereby invites tenderers to apply to be qualified for a competition with negotiations on workshop equipment for ski bus facilities.Lieferung und Inbetriebnahme einer Rollenfräse für profilierte Heberwalzen
Oesterreichische Banknoten- und Sicherheitsdruck GmbHWienLieferung und Inbetriebnahme einer Rollenfräse für profilierte HeberwalzenCNC-Laseranlage
Forschungszentrum Jülich GmbH -Team Infrastruktur-JülichFrist: 27. JuliAuftraggebers, den Auftrag ohne vorherige Veröffentlichung einer Bekanntmachung im Amtsblatt der Europäischen Union zu vergeben, und den Namen und die Kontaktdaten des Unternehmens, das den Zuschlag erhalten soll, umfassen. Organização que fornece mais informações sobre os procedimentos de recurso: Forschungszentrum Jülich GmbH -Team Infrastruktur- - Vergabekammer des BundesVertikalbandsäge zum Sägen von Stahl (rost- und säurebeständig) mit hydraulischem Tischvorschub
Helmholtz-Zentrum hereon GmbHTeltowVertikalbandsäge zum Sägen von Stahl, rost- und säurebeständigem Stahl und ähnlichen Materialien. Ausstattung: Frequenzumrichter, Bandriss-Abschaltung, Endschalter an Türen, Bandspannungsanzeiger, Tisch 660x660 mm mit hydraulischem Vorschub (260 mm) und 4 T-Nuten, hydraulische Vorschubregelung, Minimalmengensprüheinrichtung, LED-Leuchte, Parallelanschlag auf Linearschiene mit digitaler Anzeige und manueller Klemmung.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Aalborg Universitet.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.