Aarhus UniversitetAarhus CTED
High-Resolution Confocal Raman Microscope with advanced scanning modes and laser trapping
The purchase concerns a LabRAM™ Odyssey High-Resolution Confocal Raman Microscope equipped with advanced scanning modes and laser trapping
Typ: Ausschreibung
Laborinstrumente
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
The purchase concerns a LabRAM™ Odyssey High-Resolution Confocal Raman Microscope equipped with advanced scanning modes and laser trapping
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Aarhus Universitet
- Veröffentlicht:
- 10. März 2026
- Frist:
- Nicht angegeben
- Thema:
- Laborinstrumente
Ausschreibungsbeschreibung
The purchase concerns a LabRAM™ Odyssey High-Resolution Confocal Raman Microscope equipped with advanced scanning modes and laser trapping
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
3- Education Procurement Service (EPS)LimerickFrist: 10. Apr.
LA3656C-UCD-CFT for the Supply of an Integrated Raman, SNOM and AFM all-in-one System for Micro to Nanoscale Characterisation for University College Dublin (UCD)
University College Dublin seeks a state-of-the-art multimodal imaging system integrating Raman spectroscopy, SNOM, and AFM with 532, 785, and 1064 nm lasers. The system enables correlative chemical, optical, and topographical analysis from microscale to nanoscale (200 nm resolution), providing spatially co-registered data. This transformative platform will position UCD as a leader in high-resolution spectroscopic imaging for physical sciences, life sciences, chemistry, and engineering. - University College CorkCork
Supply, Delivery and Installation of a Transmission Electron Microscopy (TEM) Suite consisting of 2 TEM tools and 1 Focused Ion Beam–Scanning Electron Microscope (FIB.SEM) for Tyndall Instit, UCC,
Procurement of a TEM suite (2 TEMs, 1 FIB-SEM) for Tyndall National Institute, UCC. Includes aberration-corrected TEM with sub-ångström resolution, 200 kV high-throughput TEM, and FIB-SEM. Supports nanoscale research in semiconductors, photonics, and quantum materials. Enhances analytical capabilities for EU Chips Act projects and industrial collaborations. Part of new lab facilities requiring advanced imaging modes (low-dose, 4D-STEM) and in-situ experimentation. 300mm fully automated high resolution in-line CD and overlay (IZM-133.1) - PR1191754-3460-P
1 piece: 300mm fully automated high resolution in-line CD and overlay (IZM-133.1) The following equipment specification defines the requirements for a fully automated metrology tool to measure overlay and critical dimension (CD) structures on 300 mm and 200 mm wafers, produced using laser direct imaging (LDI) and i-line lithography. This investment expands the metrology capability for automated measurement of smaller feature sizes. The tool is essential for non-destructive characterization of highly integrated, chiplet-based 2.5D/3D and quasi-monolithic package architectures with sub-micrometer feature sizes. The equipment is compatible with 3D wafer stacks exhibiting high warp/bow. Wafer substrates are silicon and/or glass, with thicknesses up to 2.5 mm. Before processing, wafers are delivered to the tool in front-opening unified pods (FOUPs), which the operator manually places on the respective load ports. The new tool must be able to perform the following sequence of steps fully automatically: - Load designated wafers from the FOUP(s) - Execute metrology tasks - Return wafers to their original positions in the FOUP(s) Recipe programming must support a sufficiently wide range of options and parameters to meet research and development (R&D) needs. It is required that the equipment continuously performs the intended functions without interruptions or failures, in accordance with all requirements specified in this document. Furthermore, the equipment must be supplied with all items described below that are necessary for it to deliver the intended functions and capabilities in compliance with all requirements set out in this document.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Aarhus Universitet.
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.