The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy')BarcelonaTED
Helium Refrigeration System (HRS) for Isotope Separation System (ISS) of ITER Fuel Cycle
The scope of this procurement procedure is the design, manufacturing, assembly, factory acceptance testing, transport and delivery of the Helium Refrigeration System (HRS) for the Isotope Separation System (ISS) within the Tritium Plant at ITER, based on Reversed Turbo-Brayton technology. The HRS will supply a cooling net power of approxi...
Angebotsfrist: 09. Oktober 2026Typ: Ausschreibung
Verfahrenstechnik, Kühltechnik
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy')
- Veröffentlicht:
- 31. August 2026
- Frist:
- 09. Oktober 2026
- Thema:
- Verfahrenstechnik
Ausschreibungsbeschreibung
Vollständige Beschreibung anzeigenBeschreibung einklappen
The scope of this procurement procedure is the design, manufacturing, assembly, factory acceptance testing, transport and delivery of the Helium Refrigeration System (HRS) for the Isotope Separation System (ISS) within the Tritium Plant at ITER, based on Reversed Turbo-Brayton technology. The HRS will supply a cooling net power of approximately 1500 W at 18.5 K for the ISS of the ITER Tritium Plant. Optional scope: Option 1: factory performance testing; Option 2: technical assistance for on-site installation and final connection activities; Option 3: technical assistance for commissioning and site acceptance testing. Before the final call for tender, F4E may decide to remove certain options from the scope.
Weiterführende Details
Mit dem kostenlosen Zugang stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Alle Vergabedetails
Auftraggeber, Lose, Beteiligte, Orte, Unterlagen und Verfahrensdaten sind bereits erfasst. Öffnen Sie einen Bereich, um die vollständigen Angaben im Workspace zu sehen.
6 Datenbereiche verfügbar
30 Tage kostenlos freischalten
30 Tage kostenlos · keine Kreditkarte · jederzeit kündbar
Unterlagen
Freischalten50 Angaben erfasstUnterlagen · Dokumentenpaket
Auftraggeber
Freischalten3 Angaben erfasstAuftraggeber · Anschrift · Kontakt
Lose
Freischalten1 Angabe erfasstLose LOT-0001
Verfahrensdaten
Freischalten6 Angaben erfasstBekanntmachungsnummer · Verfahrensreferenz · Referenz des Auftraggebers · Verfahrensart · +2 weitere
Ausführungsorte
Freischalten2 Angaben erfasstAusführungsorte
Veröffentlichungsstelle
Freischalten3 Angaben erfasstVeröffentlichungsstelle · Anschrift · Kontakt
Ähnliche Bekanntmachungen
10Request for Tenders for the Supply of The Design, Supply, Installation and Commissioning of Automated Welding and Precision Metal Fabrication Equipment
Kerry Education and Training BoardTraleeFrist: 05. Okt.Request for Tenders for the Supply of The Design, Supply, Installation and Commissioning of Automated Welding and Precision Metal Fabrication Equipment, to Kerry Education and Training Board on behalf of Kerry College Monavalley CampusAgreement for the Design, Supply and Implementation of an Automated Warehouse System – ICM 2.0 and a Call-off Contract for the Maintenance.
Fluxys Belgium n.v.EtterbeekFrist: 29. Sept.The ICM 2.0 project consists of the implementation of a new automated pallet warehouse for the Fluxys Intervention Centre, ensuring reliable 24/7 material availability. The scope includes the design, supply, automation, software, system integration, implementation and supporting services, as well as a maintenance contract for the automated warehouse system, to ensure a high-availability and future-proof warehouse operation.26/338A Single Party Framework Agreement for a Multi Material Drop-On-Demand (DoD) Inkjet 3D Printing System for Atlantic Technological University
Atlantic Technological UniversityLetterkennyFrist: 31. Aug.The Contracting Authority proposes to engage in a competitive process for the establishment of a single operator framework agreement for the supply, installation, and commissioning of a Multi Material Drop-On-Demand (DoD) Inkjet 3D Printing System to support research and development activities. Please refer to the attached documentation for further informationRFQ for Tools, Machinery, and Equipment for the Residual Plastic Recovery System
UNDPJordanFrist: 10. Sept.Background of Residual Plastic Recovery System (RPRS) UNDP is supporting sustainable solid waste management interventions in Cox’s Bazar, including efforts to improve resource recovery and reduce the volume of waste requiring final disposal at sanitary landfill sites. As part of this effort, UNDP plans to introduce Residual Plastic Recovery Systems (RPRS) at two locations: the Sanitary Landfill Site in Camp 20 Extension, Ukhiya, and the Teknaf Material Recovery Facility (MRF) Site near Boat Ghat Bazar, Teknaf, Cox’s Bazar. The RPRS is designed to support the recovery and processing of residual plastic and polythene waste generated from camp-based and municipal solid waste management systems. The system will help recover plastic-rich waste fractions that would otherwise be sent to landfill and process them through cleaning, crushing, washing, drying, extrusion and pelletizing. Through this process, loose residual plastic and polythene waste will be converted into a more concentrated and manageable form, such as processed plastic blocks or pellets. This will make the recovered plastic easier to store, transport and link with relevant recycling markets, where it can be used as raw material for further production. In this way, the RPRS will help improve the marketability of residual plastic waste and support circular economy opportunities. By reducing the volume of loose plastic waste entering the landfill, the RPRS is expected to help preserve remaining landfill capacity and improve landfill operations. It will reduce bulky, loose and difficult-to-compact plastic waste, thereby making compaction, covering and overall landfill management more stable and efficient. To ensure effective operation, the RPRS will require appropriate infrastructure, equipment, operational space, utility support, drainage, ventilation, occupational safety measures and environmental protection arrangements. The facilities will include provisions for receiving and temporarily storing raw plastic waste, feeding and processing materials, operating and maintaining machinery, moving workers and materials safely, and storing processed plastic materials and pellets. The proposed procurement packages under the RPRS will support the establishment of the required civil infrastructure, solar-based power system, and operational tools, machinery and equipment. Together, these packages will enable the installation and operation of the RPRS facilities and contribute to improved residual plastic recovery and more sustainable solid waste management in Cox’s Bazar. Interested suppliers must submit their offer directly in the system as instructed in the solicitation document, following the instructions in the available user guide. In case you have never registered before, you can register a profile using the registration link shared via the procurement notice and following the instructions in guides available in the UNDP website: https://www.undp.org/procurement/business/resources-for-bidders. Do not create a new profile if you already have one. Use the forgotten password feature in case you do not remember the password or the username from previous registration. Search for the specific tender using search filters and subscribe to the tender in order to get notifications in case of amendments of the tender document. If you need support with the online system, you can contact the contact details of this tender as indicated in the solicitation document. UNDPBD Procurement UnitBeschaffung eines Wellenerzeugers für die Flachwasserrinne der Technischen Universität Berlin / Procurement of a wave generator for the shallow water tank of the Technische Universität Berlin
Technische Universität BerlinBerlinDie Technische Universität Berlin (TU Berlin, die Auftraggeberin/ die AG) beabsichtigt die Beschaffung eines Wellenerzeugers für die Flachwasserrinne der Technischen Universität Berlin (fortan: Wellenerzeuger für die Flachwasserrinne). Die Ausschreibung umfasst die vollständige Bereitstellung eines funktionsbereiten Wel-lenerzeugers für die Flachwasserrinne. Dies inkludiert Planung, Fertigung, Lieferung, In-stallation und Inbetriebnahme des Wellenerzeugers für die Flachwasserrinne, inklusive notwendiger Hard- und Software zur Steuerung. Es sind ausschließlich Neugeräte anzu-bieten und zu liefern. Die Beschaffung umfasst die Lieferung, inklusive Aufstellung, Installation und betriebsbe-reite Übergabe der des Wellenerzeugers für die Flachwasserrinne sowie eine anschlie-ßende technische Einweisung/ Schulung. Alle detaillierten Informationen können aus den folgenden Abschnitten der Leistungsbeschreibung genommen werden. Es sind ausschließlich Neugeräte anzubieten und zu liefern. Wiederaufbereitete Produkte, Rückläufer etc. oder Grauimporte sind ausgeschlossen. / The Technische Universität Berlin (TU Berlin, the Contracting Authority) intends to pro-cure a wave generator for the shallow water tank of the Technische Universität Berlin (hereinafter: wave generator for the shallow water tank). The tender covers the complete provision of a fully operational wave generator for the shallow water tank. This includes the design, manufacturing, delivery, installation, and commissioning of the wave genera-tor for the shallow water tank, including all necessary hardware and software for control purposes. Only brand-new equipment is to be offered and delivered. The procurement includes the delivery, including setup, installation, and turnkey hando-ver of the wave generator for the shallow water tank, as well as subsequent technical instruction/training. Detailed information can be found in the following sections of the service specifications. Only brand-new equipment is to be offered and delivered. Refurbished products, returns, etc., or grey market imports are excluded.SUPPLY, INSTALLATION AND COMMISSIONING OF AN ELECTRICAL CENTRIFUGAL CHILLER FOR AN AIR CONDITIONING SYSTEM IN THE INDUSTRIAL SECTOR IN SRI LANKA
UNIDOPhilippinesFrist: 28. Aug.Tendering Text: SUPPLY, INSTALLATION AND COMMISSIONING OF AN ELECTRICAL CENTRIFUGAL CHILLER FOR AN AIR CONDITIONING SYSTEM IN THE INDUSTRIAL SECTOR IN SRI LANKAEstablishing of 2+1+1 years Long Term Arrangement for the Supply of Equipment for district heating networks to UNICEF Ukraine
UNICEFIndiaFrist: 07. Sept.UNICEF has now issued an Invitation to Bid in order to select a supplier for the provision of 2+1+1 years Long Term Arrangement for the Supply of Equipment for district heating networks to UNICEF Ukraine. Bid conference is held on 11 August 2026, at 11:00 (Kyiv time) via MS Teams: https://teams.microsoft.com/meet/343057184499922?p=i7emgBVE6WE0k3mVng Meeting ID: 343 057 184 499 922 Passcode: EC35QR3C This tender will be run through the UNICEF e-submissions system. By clicking on the blue ‘Express Interest’ button in the UNGM tender notice, the full UNICEF e-submission system instructions to bidders document (including instructions on how to access the tender documents and submit an Offer) will be automatically emailed to the ‘contact persons’ included in your UNGM registration. Alternatively, the full UNICEF e-submission system instructions to bidders document is publicly available on the UNICEF supply internet pages here: https://www.unicef.org/supply/index_procurement_policies.html . In the tender management site, if you navigate to the documents tab and opt in to confirm your intention to submit a Bid – you will then see the mandatory placeholders for documents that must be attached prior to submitting your Offer (you will also see if there are any mandatory questionnaires to complete). As such, you are recommended to `opt in` well before the submission deadline so you are clear exactly what documents are required to be uploaded prior to completing your submission. Please note that in order to access the tender documentation through UNICEF’s e-submissions system, vendors must: (i) be registered with UNICEF in UNGM as a company/NGO; (ii) have successfully completed all mandatory information currently required by UNGM when registering. Please ensure that any files submitted as part of your Bid are not corrupt or damaged in any way. Please exercise particular caution when using compressed files. Any corrupt or damaged files may lead to your Bid being invalidated. All vendors are strongly recommended to regularly log in to the UNICEF e-submissions system to check for any deadline extensions, new clarifications, new correspondence or updated tender documents relating to this tender.Invitation to Bid for Supply of Cold Chain Equipment Toolkit （x29 Toolkits） for R134a + R600A refrigerant systems - LITB-2026-9205772
UNICEFIndiaFrist: 14. Sept.***INVITATION TO BID*** Dear Sir/Madam, Greetings from UNICEF Papua New Guinea. We cordially invite you/your organisation/company to submit your BID for: Cold Chain Equipment Toolkit (x29 Toolkits) for R134a + R600A refrigerant systems Bid close by 23:30hrs (PNG Port Moresby time) on Monday 14th September, 2026. 1. We request that your bids be emailed to: [email protected] Email header should read as follows: SUBMISSION OF BID - LITB-2026-9205772 2. Ensure that the BID FORM on pages 3-5 of the LITB document be filled and returned with your bid. *This LITB is open to Local and International companies. For PNG-based companies, ensure your bid is expressed in local currency (PNG Kina). For International companies, ensure your bid is expressed in USD. You bid should include shipment to Port Moresby (FCA Incoterm). _____________________________________________________________ 3. A Bid Opening Meeting will be held after the bid closing date and those bidders who submitted their bids on time will be receive a MS Teams invitation to attend the virtual bid opening meeting at date/time TBD. Thanks with best regards, ---------------------------------------- UNICEF PNG Bids UNICEF Papua New Guinea | Level 5, Kina Bank Haus, Douglas St, Port Moresby, N. C. D. Email: [email protected]Lieferauftrag Thermochiller
Silicon Austria Labs GmbHGrazFrist: 16. Sept.dar, die nicht als authentische Bekanntmachung bzw. Bekanntgabe angesehen werden kann.Hydrodynamic cavitation unit
LuonnonvarakeskusHelsinkiFrist: 10. Sept.Natural Resources Institute Finland (hereafter referred to as "Luke") requests your tender for Hydrodynamic cavitation unit with this Call for Tenders and its annexes. The HC unit and related products shall be installed on 30th of November 2026 at the latest. The subject of the procurement is described in more detail in Appendix 2. Description of the Procurement and other procurement documents.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Die Angebotsfrist endet am 09. Oktober 2026.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy').
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.