Stichting Nederlandse Wetenschappelijk Onderzoek Instituten (NWO-I)AMSTERDAMTED
Delivery of femtosecond Ti:sapphire laser systems
The required system must simultaneously satisfy the following combined set of specifications under operational laboratory conditions: • 7 mJ pulse energy at 1 kHz and approximately 35 fs; • Compatibility with a TOPAS HE OPA accepting up to 8 mJ / 35 fs input pulses; • Upgrade path using the same seed laser to support an additional >7 mJ, ...
Typ: Ausschreibung
Laborinstrumente
Dokumente kostenlos freischalten
Ohne Kreditkarte · Sofortiger Zugang
Inhalt auf einen Blick
The required system must simultaneously satisfy the following combined set of specifications under operational laboratory conditions: • 7 mJ pulse energy at 1 kHz and approximately 35 fs; • Compatibility with a TOPAS HE OPA accepting up to 8 mJ / 35 fs input pulses; • Upgrade path using the same seed laser to support an additional >7 m...
- Ausschreibungstyp:
- Ausschreibung
- Auftraggeber:
- Stichting Nederlandse Wetenschappelijk Onderzoek Instituten (NWO-I)
- Veröffentlicht:
- 07. Juni 2026
- Frist:
- Nicht angegeben
- Thema:
- Laborinstrumente
Ausschreibungsbeschreibung
The required system must simultaneously satisfy the following combined set of specifications under operational laboratory conditions: • 7 mJ pulse energy at 1 kHz and approximately 35 fs; • Compatibility with a TOPAS HE OPA accepting up to 8 mJ / 35 fs input pulses; • Upgrade path using the same seed laser to support an additional >7 mJ, 1 kHz, 35 fs amplifier beamline; • Beam pointing stability better than 4 μrad rms; • Pulse energy stability better than 0.4% rms over 24 hours; • TEM00 beam quality with M² < 1.20 in both axes; • Active compressor stabilization; • Dedicated stabilization of the Ti:sapphire thermal lens; • Guaranteed stable performance over ±5 °C laboratory temperature variation; • Nanosecond pre-pulse contrast better than 2000:1; • Laser design that minimizes spectral distortion of the compressed pulse. 1 femtosecond Ti:sapphire laser system
Weiterführende Details
Nach Registrierung stehen Unterlagen, Fristen und Hinweise zur Einreichung strukturiert bereit.
- Kernanforderungen der Ausschreibung priorisiert aufbereitet
- Fristen, Eignungskriterien und Unterlagen in einem Ablauf
- Hinweise zur strukturierten Angebotsvorbereitung
- Passende Folgeausschreibungen automatisch entdecken
Dokumente und Anhänge
49 Dateien erfasst- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Ähnliche Bekanntmachungen
10- Stichting Nederlandse Wetenschappelijk Onderzoek Instituten (NWO-I)AMSTERDAM
Delivery of femtosecond Ti:sapphire laser systems
Erforderlich ist ein 1 fs Ti:sapphire Lasersystem unter Laborkonditionen mit folgenden Spezifikationen: 7 mJ Pulsenergie bei 1 kHz und ca. 35 fs; Kompatibilität mit TOPAS HE OPA für bis zu 8 mJ/35 fs Eingangspulse; Upgrade-Pfad zur Unterstützung einer zusätzlichen Verstärkerstrahlleitung von >7 mJ, 1 kHz, 35 fs; Strahlpunktstabilität besser als 4 μrad rms; Pulsenergie-Stabilität besser als 0,4% rms über 24 Stunden; TEM00-Strahlqualität mit M² < 1,20 in beiden Achsen; Aktive Kompressorstabilisierung; Dedizierte Stabilisierung der Ti:sapphire-Thermolinse; Garantie stabiler Leistung bei ±5 °C Temperaturschwankung; Nanosekunden-Vorpuls-Kontrast besser als 2000:1; Laserdesign zur Minimierung der spektralen Verzerrung des komprimierten Pulses. - Helmholtz-Zentrum Dresden-Rossendorf e.V.Dresden
Photocathode Laser System
Helmholtz-Zentrum Dresden-Rossendorf (HZDR) has been working on the development of a superconducting electron source (SRF gun) for about 20 years. An integral part of this electron source is a photocathode laser which, in combination with a photocathode, uses the external photoelectric effect to generate electron pulses. These pulses are then accelerated by the electric field of the superconducting RF resonator. The required laser wavelength for this purpose is about 260 nm, while the aimed pulse energy at this wavelength is 5 μJ. Detailed requirements in the table below (2. Performance quote) are specified separately for the fundamental wavelength in infrared (IR) and the 4th harmonic in ultraviolet (UV). Pulse repetition rate shall be flexible and reach 2 MHz. The average power in UV has to reach at least 1 W. Laser pulse duration is a key optimization parameter that needs to be variable in the range of 0.3-10 ps FWHM. Moreover, the temporal (longitudinal) profile of the laser pulse overall is important for properties of the generated electron pulse and thus also needs to be adjustable. For this, a spatial light modulator for modifying the spectrum needs to be integrated in the offered system. It is desirable that the manufacturer finds settings of the spectral shaper that result in a flat-top temporal shape of the UV pulse. Given that the temporal shape of a chirped pulse is critical in the planned application, spectral smoothness, stability and absence of long wings or shoulders are of high importance. Spectrum distortions caused by nonlinear effects shall be insignificant even at the maximum required pulse energy. Ability to synchronize the oscillators' repetition rate to a radio-frequency (RF) reference signal is necessary. Achievable integrated time jitter in the range between 10 Hz and 1 MHz of the laser with respect to the reference shall not exceed 100 fs. However, synchronization electronics are not part of the current tender and will be obtained from another source. The oscillator needs to be prepared for repetition rate locking, i.e. contain a short-range and a long-range actuators for fine adjustment of the cavity length. Another aspect of synchronization is the ability to control the repetition rate and the emission time of the laser by an external trigger signal. This ability needs to be available. Reliability and permanent availability (24/7) are of particular importance. The system will be located in an optical laboratory with ±1°C temperature stability. Beside the fulfilment of the criteria described in annex 01A, the scope of deliveries and services includes, that means are to be offered in the quotation: • Factory Acceptance Test (FAT), with proof of fulfilment of the performance requirements • Delivery according to DDP (Incoterms 2010) to the place of usage • Installation und commissioning including On-Site Acceptance Test (OSAT), with proof of fulfilment of the performance requirements • 12 months warranty from OSAT • CE marking • complete manual in English • suitable "water-to-water chiller" - Helmholtz-Zentrum Dresden-Rossendorf e.V.Dresden
Femtosecond Laser System
The requested laser system is an essential component of the terahertz (THz) user facility TELBE at the ELBE Center for High-Power Radiation Sources at the HZDR. At this facility, intense THz pulses from an accelerator-based source are used to excite various kinds of sample materials; the THz-driven dynamics are then probed using optical methods based on ultrashort (femtosecond), intense, carefully tailored and synchronized light pulses. The requested laser infrastructure will serve as the main probe laser with versatile parameters and output options. This laser infrastructure will also serve various purposes apart from probing, such as providing a timing reference, additional optical pump capabilities for 2D spectroscopy experiments. The laser system must consist of the following main components: A) Femtosecond laser oscillator B) Laser amplifier C)Optical parametric amplifier D) Mid-infrared (MIR) source. Beside the fulfillment of the criteria described under 2. Performance quote of Annex 01A, the scope of deliveries and services includes: - delivery at the place of performance - laser installation infrastructure (electricity, cooling water, and optical table) will be provided by HZDR - suitable laser chillers (water-water) included in the delivery - site acceptance test (SAT) - user documentation in English - a 12-month warranty on the entire laser system, including all necessary components, from the date of acceptance (SAT), but no later than 3 months after delivery if acceptance is delayed for reasons beyond the contractor’s control - CE conformity - on-site user training for at least two users - Helmholtz-Zentrum Dresden-Rossendorf e.V.Dresden
Photocathode Laser System
Helmholtz-Zentrum Dresden-Rossendorf (HZDR) has been working on the development of a superconducting electron source (SRF gun) for about 20 years. An integral part of this electron source is a photocathode laser which, in combination with a photocathode, uses the external photoelectric effect to generate electron pulses. These pulses are then accelerated by the electric field of the superconducting RF resonator. The required laser wavelength for this purpose is about 260 nm, while the aimed pulse energy at this wavelength is 5 μJ. Detailed requirements in the table below (2. Performance quote) are specified separately for the fundamental wavelength in infrared (IR) and the 4th harmonic in ultraviolet (UV). Pulse repetition rate shall be flexible and reach 2 MHz. The average power in UV has to reach at least 1 W. Laser pulse duration is a key optimization parameter that needs to be variable in the range of 0.3-10 ps FWHM. Moreover, the temporal (longitudinal) profile of the laser pulse overall is important for properties of the generated electron pulse and thus also needs to be adjustable. For this, a spatial light modulator for modifying the spectrum needs to be integrated in the offered system. It is desirable that the manufacturer finds settings of the spectral shaper that result in a flat-top temporal shape of the UV pulse. Given that the temporal shape of a chirped pulse is critical in the planned application, spectral smoothness, stability and absence of long wings or shoulders are of high importance. Spectrum distortions caused by nonlinear effects shall be insignificant even at the maximum required pulse energy. Ability to synchronize the oscillators' repetition rate to a radio-frequency (RF) reference signal is necessary. Achievable integrated time jitter in the range between 10 Hz and 1 MHz of the laser with respect to the reference shall not exceed 100 fs. However, synchronization electronics are not part of the current tender and will be obtained from another source. The oscillator needs to be prepared for repetition rate locking, i.e. contain a short-range and a long-range actuators for fine adjustment of the cavity length. Another aspect of synchronization is the ability to control the repetition rate and the emission time of the laser by an external trigger signal. This ability needs to be available. Reliability and permanent availability (24/7) are of particular importance. The system will be located in an optical laboratory with ±1°C temperature stability. Beside the fulfilment of the criteria described in annex 01A, the scope of deliveries and services includes, that means are to be offered in the quotation: • Factory Acceptance Test (FAT), with proof of fulfilment of the performance requirements • Delivery according to DDP (Incoterms 2010) to the place of usage • Installation und commissioning including On-Site Acceptance Test (OSAT), with proof of fulfilment of the performance requirements • 12 months warranty from OSAT • CE marking • complete manual in English • suitable "water-to-water chiller" - Geologian tutkimuskeskusEspoo
Femtosecond laser ablation system for geological applications
A tender is requested for 1 (one) femtosecond laser ablation system for geological applications. The tenderer shall guarantee that the object of the tender shall be free of defects and meet the requirements as set forth in this document and its appendices. The tender shall incorporate the latest improvements, components and software versions available at the time the tender is submitted to Geological Survey of Finland. The instrument and the related services must satisfy the following minimum requirements, and the fulfilment of all criteria must be documented within the tender. Please, see the ITT fs laser for more details. - TenneT TSO GmbHBayreuth
Framework Agreement for the Delivery of Control Systems (IEC104) and the Provision of related services
Framework Agreement for the Delivery of Control Systems (IEC104) and the Provision of related services TenneT is a leading European transmission system operator responsible for the safe and reliable transmission of electrical energy over long distances. TenneT’s core tasks include the expansion and maintenance of the transmission grid, the integration of renewable energy sources, and the assurance of grid stability. TenneT’s grid area covers large parts of Germany and the Netherlands and includes both onshore and offshore connections. As an operator of critical infrastructure, the security and reliability of the systems in use are of particular importance. The aim of this tender is the establishment of two framework agreements for the procurement of substation Control Systems, in particular Intelligent Electronic Devices (IEDs) and field control units, for use in TenneT TSO GmbH’s (TTG) high‑voltage and extra‑high‑voltage substations. The systems to be procured are intended for control, monitoring, signalling and automation purposes within substations and are a key element of secure and reliable grid operation. Within the scope of this tender, TTG intends to procure Control System components including, but not limited to, bay control units, station control units, interface devices, and related auxiliary equipment. A central focus of the procurement is the use of the communication protocol IEC 60870‑5‑104 (IEC 104) for the exchange of control, status and measurement data between the substation level and higher‑level control systems. The devices shall support typical substation automation functions, reliable IEC 104 communication, and seamless integration into existing station control concepts in accordance with applicable technical standards. The subject of this tender is the supply of Control Systems hardware, including IEDs and associated components, as well as related documentation and services necessary for commissioning and integration into TTG’s substations. The framework agreement shall enable TTG to call off devices on demand over the contract term for new installations, refurbishments, and replacement purposes. Parallel to the hardware framework agreement, TTG intends to conclude a separate service contract covering the maintenance of the devices and the maintenance of embedded software, including corrective and preventive measures as well as software updates and upgrades, in accordance with the contractual provisions. Due to increasing requirements regarding system availability and redundancy, the procurement procedure is structured into two lots, which will be awarded separately. The lot structure is intended to ensure supply security, operational resilience and redundancy of the Control Systems deployed within TTG’s transmission grid. TenneT TSO GmbH is certified according to ISO 27001. Therefore, only Control Systems and equipment that comply with TTG’s Operational Technology security requirements may be offered (OT security and IT security requirements). Tender Documents To participate in the tender, please complete the Non‑Disclosure Agreement below and send it via email to: [email protected] Access to the additional tender documents will be granted immediately upon receipt and review of the document. TenneT TSO GmbH will treat the documents you submit and the trade and business secrets contained therein as confidential in accordance with Section 5 of the Sector Ordinance. - TenneT TSO GmbHBayreuthFrist: 30. Juni
Framework Agreement for the Delivery of Control Systems (IEC104) and the Provision of related services
Framework Agreement for the Delivery of Control Systems (IEC104) and the Provision of related services TenneT is a leading European transmission system operator responsible for the safe and reliable transmission of electrical energy over long distances. TenneT’s core tasks include the expansion and maintenance of the transmission grid, the integration of renewable energy sources, and the assurance of grid stability. TenneT’s grid area covers large parts of Germany and the Netherlands and includes both onshore and offshore connections. As an operator of critical infrastructure, the security and reliability of the systems in use are of particular importance. The aim of this tender is the establishment of two framework agreements for the procurement of substation Control Systems, in particular Intelligent Electronic Devices (IEDs) and field control units, for use in TenneT TSO GmbH’s (TTG) high‑voltage and extra‑high‑voltage substations. The systems to be procured are intended for control, monitoring, signalling and automation purposes within substations and are a key element of secure and reliable grid operation. Within the scope of this tender, TTG intends to procure Control System components including, but not limited to, bay control units, station control units, interface devices, and related auxiliary equipment. A central focus of the procurement is the use of the communication protocol IEC 60870‑5‑104 (IEC 104) for the exchange of control, status and measurement data between the substation level and higher‑level control systems. The devices shall support typical substation automation functions, reliable IEC 104 communication, and seamless integration into existing station control concepts in accordance with applicable technical standards. The subject of this tender is the supply of Control Systems hardware, including IEDs and associated components, as well as related documentation and services necessary for commissioning and integration into TTG’s substations. The framework agreement shall enable TTG to call off devices on demand over the contract term for new installations, refurbishments, and replacement purposes. Parallel to the hardware framework agreement, TTG intends to conclude a separate service contract covering the maintenance of the devices and the maintenance of embedded software, including corrective and preventive measures as well as software updates and upgrades, in accordance with the contractual provisions. Due to increasing requirements regarding system availability and redundancy, the procurement procedure is structured into two lots, which will be awarded separately. The lot structure is intended to ensure supply security, operational resilience and redundancy of the Control Systems deployed within TTG’s transmission grid. TenneT TSO GmbH is certified according to ISO 27001. Therefore, only Control Systems and equipment that comply with TTG’s Operational Technology security requirements may be offered (OT security and IT security requirements). Tender Documents To participate in the tender, please complete the Non‑Disclosure Agreement below and send it via email to: [email protected] Access to the additional tender documents will be granted immediately upon receipt and review of the document. TenneT TSO GmbH will treat the documents you submit and the trade and business secrets contained therein as confidential in accordance with Section 5 of the Sector Ordinance. - TenneT TSO GmbHBayreuth
Framework Agreement for the Delivery of Control Systems (IEC104) and the Provision of related services
Framework Agreement for the Delivery of Control Systems (IEC104) and the Provision of related services TenneT is a leading European transmission system operator responsible for the safe and reliable transmission of electrical energy over long distances. TenneT’s core tasks include the expansion and maintenance of the transmission grid, the integration of renewable energy sources, and the assurance of grid stability. TenneT’s grid area covers large parts of Germany and the Netherlands and includes both onshore and offshore connections. As an operator of critical infrastructure, the security and reliability of the systems in use are of particular importance. The aim of this tender is the establishment of two framework agreements for the procurement of substation Control Systems, in particular Intelligent Electronic Devices (IEDs) and field control units, for use in TenneT TSO GmbH’s (TTG) high‑voltage and extra‑high‑voltage substations. The systems to be procured are intended for control, monitoring, signalling and automation purposes within substations and are a key element of secure and reliable grid operation. Within the scope of this tender, TTG intends to procure Control System components including, but not limited to, bay control units, station control units, interface devices, and related auxiliary equipment. A central focus of the procurement is the use of the communication protocol IEC 60870‑5‑104 (IEC 104) for the exchange of control, status and measurement data between the substation level and higher‑level control systems. The devices shall support typical substation automation functions, reliable IEC 104 communication, and seamless integration into existing station control concepts in accordance with applicable technical standards. The subject of this tender is the supply of Control Systems hardware, including IEDs and associated components, as well as related documentation and services necessary for commissioning and integration into TTG’s substations. The framework agreement shall enable TTG to call off devices on demand over the contract term for new installations, refurbishments, and replacement purposes. Parallel to the hardware framework agreement, TTG intends to conclude a separate service contract covering the maintenance of the devices and the maintenance of embedded software, including corrective and preventive measures as well as software updates and upgrades, in accordance with the contractual provisions. Due to increasing requirements regarding system availability and redundancy, the procurement procedure is structured into two lots, which will be awarded separately. The lot structure is intended to ensure supply security, operational resilience and redundancy of the Control Systems deployed within TTG’s transmission grid. TenneT TSO GmbH is certified according to ISO 27001. Therefore, only Control Systems and equipment that comply with TTG’s Operational Technology security requirements may be offered (OT security and IT security requirements). Tender Documents To participate in the tender, please complete the Non‑Disclosure Agreement below and send it via email to: [email protected] Access to the additional tender documents will be granted immediately upon receipt and review of the document. TenneT TSO GmbH will treat the documents you submit and the trade and business secrets contained therein as confidential in accordance with Section 5 of the Sector Ordinance. - European High-Performance Computing Joint UndertakingLuxembourgFrist: 10. Juli
Acquisition, Delivery, Installation and Hardware and Software Maintenance of Discoverer++ AI Supercomputer
The purpose of the Invitation to Tender is to select one (1) economic operator (hereafter “Contractor”) for the component acquisition, delivery, assembly, hardware and software installation and maintenance of an AI-ready EuroHPC machine (“Supercomputer”) to establish an associated “AI Factory” and that will be owned by the EuroHPC JU. The EuroHPC JU will conclude one contract with the successful tenderer in order to acquire, deliver, install and maintain the High-End Supercomputer hosted by the respective Hosting Entity. Therefore, the prospective Contractors should have proven experience of acquiring, delivering, installing and maintaining Supercomputers in similar environments as the ones required in this procurement procedure. The solutions to be procured are expected to outperform existing solutions regarding several of the following aspects: • Performance/TCO; • Programmability and usability; • Versatility; • System stability; • Power and energy efficiency; • Computing density. - European High-Performance Computing Joint UndertakingLuxembourgFrist: 18. Sept.
Acquisition, Delivery, Installation and Hardware and Software Maintenance of Discoverer++ AI Supercomputer
The purpose of the Invitation to Tender is to select one (1) economic operator (hereafter “Contractor”) for the component acquisition, delivery, assembly, hardware and software installation and maintenance of an AI-ready EuroHPC machine (“Supercomputer”) to establish an associated “AI Factory” and that will be owned by the EuroHPC JU. The EuroHPC JU will conclude one contract with the successful tenderer in order to acquire, deliver, install and maintain the High-End Supercomputer hosted by the respective Hosting Entity. Therefore, the prospective Contractors should have proven experience of acquiring, delivering, installing and maintaining Supercomputers in similar environments as the ones required in this procurement procedure. The solutions to be procured are expected to outperform existing solutions regarding several of the following aspects: • Performance/TCO; • Programmability and usability; • Versatility; • System stability; • Power and energy efficiency; • Computing density.
Häufige Fragen zu dieser Ausschreibung
- Wie kann ich mich auf diese Ausschreibung bewerben?
- Erstellen Sie ein kostenloses Konto auf Auftrag One. Danach sehen Sie alle Unterlagen, Fristen und Hinweise zur Einreichung in einem strukturierten Ablauf.
- Bis wann läuft die Angebotsfrist?
- Für diese Bekanntmachung ist aktuell keine konkrete Angebotsfrist angegeben.
- Wer ist der Auftraggeber?
- Der Auftraggeber ist Stichting Nederlandse Wetenschappelijk Onderzoek Instituten (NWO-I).
- Welche Unterlagen sind für den Start relevant?
- In der Regel benötigen Sie Leistungsbeschreibung, Eignungsnachweise, Fristenhinweise und ggf. Formblätter. Auf Auftrag One werden diese Punkte priorisiert dargestellt.