Fjársýsla ríkisinsReykjavíkTED
VEAT - VMS System Upgrade
Software development/ Upgrade of Trackwell’s VMS-system to meet new NEAFC requirements, which requires upgrading the system from ERS to Flux in accordance with NEAFC specifications. The VMS system is operated by Fiskistofa (Directorate of Fisheries) and Landhelgisgæsla (Icelandic Coast Guard).
Submission deadline: April 30, 2026 (expired)Type: Tender
Software Development, IT Consulting
Unlock documents for free
No credit card · Instant access
Content at a glance
Software development/ Upgrade of Trackwell’s VMS-system to meet new NEAFC requirements, which requires upgrading the system from ERS to Flux in accordance with NEAFC specifications. The VMS system is operated by Fiskistofa (Directorate of Fisheries) and Landhelgisgæsla (Icelandic Coast Guard).
- Tender type:
- Tender
- Contracting authority:
- Fjársýsla ríkisins
- Published:
- March 01, 2026
- Deadline:
- April 30, 2026
- Topic:
- Software Development
Tender description
Software development/ Upgrade of Trackwell’s VMS-system to meet new NEAFC requirements, which requires upgrading the system from ERS to Flux in accordance with NEAFC specifications. The VMS system is operated by Fiskistofa (Directorate of Fisheries) and Landhelgisgæsla (Icelandic Coast Guard).
Further details
After registration, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Documents and attachments
49 files recorded- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Related tenders
4- Fjársýsla ríkisinsReykjavík
Upgrade des VMS-Systems von ERS auf Flux gemäß NEAFC-Anforderungen für Fiskistofa und die isländische Küstenwache
Software development/ Upgrade of Trackwell’s VMS-system to meet new NEAFC requirements, which requires upgrading the system from ERS to Flux in accordance with NEAFC specifications. The VMS system is operated by Fiskistofa (Directorate of Fisheries) and Landhelgisgæsla (Icelandic Coast Guard). 300mm fully automated high resolution in-line CD and overlay (IZM-133.1) - PR1191754-3460-P
1 piece: 300mm fully automated high resolution in-line CD and overlay (IZM-133.1) The following equipment specification defines the requirements for a fully automated metrology tool to measure overlay and critical dimension (CD) structures on 300 mm and 200 mm wafers, produced using laser direct imaging (LDI) and i-line lithography. This investment expands the metrology capability for automated measurement of smaller feature sizes. The tool is essential for non-destructive characterization of highly integrated, chiplet-based 2.5D/3D and quasi-monolithic package architectures with sub-micrometer feature sizes. The equipment is compatible with 3D wafer stacks exhibiting high warp/bow. Wafer substrates are silicon and/or glass, with thicknesses up to 2.5 mm. Before processing, wafers are delivered to the tool in front-opening unified pods (FOUPs), which the operator manually places on the respective load ports. The new tool must be able to perform the following sequence of steps fully automatically: - Load designated wafers from the FOUP(s) - Execute metrology tasks - Return wafers to their original positions in the FOUP(s) Recipe programming must support a sufficiently wide range of options and parameters to meet research and development (R&D) needs. It is required that the equipment continuously performs the intended functions without interruptions or failures, in accordance with all requirements specified in this document. Furthermore, the equipment must be supplied with all items described below that are necessary for it to deliver the intended functions and capabilities in compliance with all requirements set out in this document.CD-SEM Measurement System (IPMS-MRS03.1) - PR884397-2480-P
1 CD-SEM Measurement System Requirements for top-down measurement of critical dimensions of lines/spaces, holes/columns and other fine features, such as elongated hile/pillar patterns formed on semiconductor wafers during wafer fabrication, using a high-throughput CD-SEM. The system is used for processing MEMS wafers in a CMOS-compatible clean-roam class 10 (approx. ISO 4) production environment. Optional service items: 1.15 General requirements The system is equipped with an uninterruptible power supply (UPS). Yes 3.3 Measurement system The traceable certified standard is part of the delivery. The calibrations are not older than 20% of the recommended calibration interval at the time of delivery. Note: A traceable certified standard can be provided by the supplier. Otherwise, Fraunhofer IPMS will provide a VLSI-certified standard. Yes 4.16 Process The system is capable of performing 3D measurements using a tilted beam. Yes 4.17 Process The system can detect and visualize backscattered electrons (BSE). It is possible to perform CD measurements on the BSE image. Yes 8.2 Optional tool features Please provide an offer for a set of consumables (lamps, O-rings, valves, etc.). Yes 8.4 Optional tool features Please provide a separate offer for typical spare parts such as axis encoder, laser interferometer, etc. Yes 11.4 Extended Warranty Should offered extended warranty starting from the date on which the statutory warranty expires. An extended warranty of further 12 months should be offered. During the warranty period all support, repair and parts cost should be covered. 12 months10004174 - Engineering support for the development of up to three PtL pilot plants in up to three countries
The International Power-to-X Hub supports the transition to climate-neutral industries and economies by advancing sustainable Power-to-X solutions in sectors where direct electrification is not yet feasible, especially aviation, maritime transport and energy-intensive industries. The project is implemented by Deutsche Gesellschaft fuer Internationale Zusammenarbeit (GIZ) GmbH on behalf of the German Federal Ministry for the Environment, Climate Action, Nature Conservation and Nuclear Safety (BMUKN). It is financed through the International Climate Initiative as part of Germany"s hydrogen and Power-to-X policy framework. Power-to-X enables the production of fuels and chemical feedstocks from renewable electricity and sustainable carbon or nitrogen sources and therefore helps replace fossil-based inputs while supporting climate protection, industrial transformation and sustainable economic development. The subject of this tender is providing technical support for the development of up to three Power-to-Liquid pilot plants in up to three countries. The assignment provides up to three industrial partner companies with customised engineering documents and advisory services to advance PtL pilot plant projects to FEED/EPC tendering stage. The requested services cover the full project development pathway from concept definition and selection through comparative techno-economic feasibility assessment and conceptual engineering to advice on procurement and tender strategy and, where required, support for the preparation of functional FEED/EPC tender documents. The contract is structured into four work packages in two implementation steps. In Work Packages A and B, the contractor shall review existing concepts and documentation, consult each partner, refine or propose PtL plant concepts, advise on feedstock and utility sourcing, process technologies, offtake markets, regulation and certification, conduct kick-off meetings and site visits, and prepare Concept and Site Analysis Reports with comparative assessments and recommendations. The contractor shall also deliver partner trainings and prepare comparative techno-economic feasibility studies for up to two plant concepts per partner, including a book of assumptions, process simulation, technical descriptions, preliminary process flow diagrams, equipment sizing, interface definitions, certification compliance assessment, CAPEX and OPEX estimates, economic modelling, risk analysis and concept recommendations. Preliminary results shall be discussed with each partner in an interactive workshop to validate assumptions, review trade-offs and support concept selection. Subject to confirmation by the partner and GIZ, Work Package C covers FEL-2 conceptual engineering for the selected concept and a refined Class 4 AACE cost estimate. This includes advisory support on site development, permitting and certification, preparation of an integrated project execution plan, partner trainings on PtL process simulation and plant engineering, and an FEL-2 engineering package comprising Basis of Design specifications, process descriptions, drawings, equipment lists, preliminary equipment specifications, interface and battery limit definitions, input and output specifications, and QA/QC and HSE requirements. The engineering work shall be carried out in close coordination with the partner and GIZ and shall include advice on technology and licensor options as well as updated CAPEX estimates, economic models and key project indicators. Where sustainable CO2 supply is not readily available, the services may also include, for one project, the screening of potential sustainable carbon sources and the design of a CCU system including FEL-1 engineering package and CAPEX assessment. In a subsequent stage, the contractor shall advise on FEED/EPC procurement and tender strategy and, where required, prepare the functional tender specifications, including design basis, technical and performance specifications, scope of supply and services, site and utility information, HSE and QA/QC requirements and project schedule elements in line with the partner"s procurement framework and international standards. The contractor shall also provide advice on commercial and legal terms during tender preparation. For one partner, the services may further include support during the FEED/EPC tendering process, including bidder communication, clarification support, qualification and bid evaluation assistance, preparation of evaluation notes and support during negotiations. Throughout implementation, the contractor shall also provide cross-cutting knowledge exchange, monitoring, reporting, backstopping and coordination services.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 30. April 2026.
- Who is the contracting authority?
- The contracting authority is Fjársýsla ríkisins.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.