Technological University Dublin (TU Dublin)DublinTED
Supply, Delivery and Installation of a Continuous, Ambient Gas Concentration Analyser for Technological University Dublin
Tenders are sought for a continuous, ambient gas concentration analyser for real-time outdoor measurement. Primary focus is detection and quantification of ammonia and methane in agricultural settings; additional capability for nitrous oxide and water vapour is desirable.
Submission deadline: May 26, 2026 (expired)Type: Tender
Measurement Technology, Laboratory Instruments
Unlock documents for free
No credit card · Instant access
Content at a glance
Tenders are sought for a continuous, ambient gas concentration analyser for real-time outdoor measurement. Primary focus is detection and quantification of ammonia and methane in agricultural settings; additional capability for nitrous oxide and water vapour is desirable.
- Tender type:
- Tender
- Contracting authority:
- Technological University Dublin (TU Dublin)
- Published:
- May 04, 2026
- Deadline:
- May 26, 2026
- Topic:
- Measurement Technology
Tender description
Tenders are sought for a continuous, ambient gas concentration analyser for real-time outdoor measurement. Primary focus is detection and quantification of ammonia and methane in agricultural settings; additional capability for nitrous oxide and water vapour is desirable.
Further details
After registration, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Documents and attachments
49 files recorded- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Related tenders
10- Education Procurement Service (EPS)Limerick
LA3587C Request for Tenders under Open National Procedure for the Supply, Delivery and Installation of a Scanning Mobility Particle Sizer System for the University of Galway (UG)
The University of Galway are seeking to purchase a Scanning Mobility Particle Sizer System that provides near real time particle number size distribution for wide range of particle sizes. The system should include, but is not limited to, the differential mobility analyser, particle counter, particle neutraliser (suitable for ambient measurement and not restricted by radioactive source licensing), sampling system, pumps, service agreement and warranty. - Education Procurement Service (EPS)Limerick
LA3587C Request for Tenders under Open National Procedure for the Supply, Delivery and Installation of a Scanning Mobility Particle Sizer System for the University of Galway (UG)
The University of Galway are seeking to purchase a Scanning Mobility Particle Sizer System that provides near real time particle number size distribution for wide range of particle sizes. The system should include, but is not limited to, the differential mobility analyser, particle counter, particle neutraliser (suitable for ambient measurement and not restricted by radioactive source licensing), sampling system, pumps, service agreement and warranty. - Education Procurement Service (EPS)LimerickDeadline: Jul 16
LA3652C - RFT for the Supply, Delivery and Installation of an Advanced 3D Printing Suite (4 Lots) for Technological University of the Shannon: Midlands Midwest (TUS)
Lot 1: Vapour Smoothing (VS) Machine: A vapour smoothing machine is a post-processing system used to enhance the surface finish of 3D-printed parts. It works by applying controlled vapour to smooth and seal the surface, improving appearance, strength, and durability. It is commonly used to produce higher-quality, functional parts for research and small-scale production. Lot 2: High-Temperature Printer: A high-temperature printer is an industrial-grade 3D printing system designed to produce strong, functional parts from advanced engineering plastics. It is used for prototyping, research, and low-volume manufacturing of components that need to withstand high temperatures or mechanical stress, offering reliable performance and consistent quality. Lot 3: Thermo-Mechanical Analyser (TMA): A TMA is a precision laboratory instrument used to measure how materials expand, contract, or deform under controlled temperature changes and small mechanical loads. It is primarily used in research to analyse thermal properties such as expansion, softening, and glass transition across a wide range of materials, helping to understand material behaviour in different environments. Lot4: Filament Line: A filament line is a small-scale production system used to create continuous strands of material with consistent diameter. It melts and extrudes material into filament, which is then cooled and wound onto spools. It is mainly used to produce materials for applications like 3D printing and research, where uniformity and material quality are important. - Education Procurement Service (EPS)LimerickDeadline: Jun 05
LA3668F - RFT - EPA - Multi-Supplier Framework Agreement for the Supply, Delivery, Installation, Servicing and Maintenance of Ambient Air Monitoring Equipment 4 Lots
Multi-supplier framework for supply, delivery, installation, servicing & maintenance of ambient air monitoring equipment. 4 Lots: Lot 1 – certified inorganic gas analysers (NOx 3, O3 2, CO 3, SO2 2); Lot 2 – ultra fine particle (2); Lot 3 – benzene (2), mercury (1), ammonia (1), black carbon (2); Lot 4 – PM gravimetric (3). Instruments must be automatic, real-time, field-capable, equivalent to CEN/2024/2881, EU certified, remote communication. For up to 29 instruments at 2 Supersites and ≥5 Hotspots. - Education Procurement Service (EPS)Limerick
RFT for the Supply, Delivery, Installation, Commissioning and Calibration of Isothermal Titration Calorimeter (ITC) for Protein Complexes for Trinity College Dublin
Trinity College Dublin require the supply of Isothermal Titration Calorimeter (ITC) for protein complexes for the deliverables of a Research Ireland grant. The calorimeter is required for measuring micro-calories of heat evolved or absorbed from protein-protein and protein-small molecule interactions in aqueous solution. The measurement involves multiple injections of ligand (protein, other macromolecules, small molecules) into a cell containing another protein, small molecule, or other macromolecules. The titration is performed under isothermal conditions using a reference cell containing water or related aqueous solution that is similar to the experimental cell. Changes in temperature between the two cells during injections are rapidly equilibrated using active power compensation that is calibrated for calories of heat. The properties of the isothermal titration calorimeter should include the following: (1) The tenderer SHOULD provide a new or recent state-of the-art (ex-demo) model ITC calorimeter, and if ex-demo, it should be minimally used. Volume of experimental and reference cells should be approximately 200 mico-Liters. (2) Typical concentration ranges for analyses should ideally be in the range from 1 micro-Molar to 100 micro-Molar for macromolecules (typically proteins) in the cell, and 10 micro-Molar to 1M concentrations in the injections syringe for the ligand. (3) Preferred temperature range for isothermal titrations from 4 deg Celsius to 60 deg Celsius. (4) software that can analyse data and determine the Kd (dissociation constant), enthalpy, and entropy from analyses of the titrations. (5) Software should handle simple 1:1 binding models, with the possibility to analyse more complex interactions, such as multiple binding sites, sequential interactions. The capability to analyse complex binding with rigor would be a major advantage, as many interactions are not simple 1:1. (6) minimal generation of bubbles or artefactual heat, which may arise from high concentrations of viscous protein in cell (7) Ideally - prefer system/software compatibility with .opj files generated by Origin 7 (or later) software, since we have nearly 20 years of previous data collections. This could be transferred to new control computer for continuity. (8) New computer, drivers, and accessories required to run the calorimeter software. - Finance Directorate - Queen's University BelfastBelfastDeadline: Jul 11
CFT 260003 Supply, Delivery (unloaded and positioned at the point of use), Installation, Commissioning, Training, Warranty and Maintenance of a GC\MS System for Analysis of Evolved Gases and Combustion Products from Solid Fuels
The School of Chemistry and Chemical Engineering requires the procurement of a Gas Chromatography–Mass Spectrometry (GC/MS) system to support the analysis of volatile and semi-volatile compounds generated from the thermal decomposition and combustion of solid fuels and related materials. The system will form part of an integrated analytical capability under the PEACEPLUS Clean Air project, supporting research, method development, and future accredited testing activity. The primary function of the GC/MS system is to enable qualitative and quantitative analysis of evolved gases and combustion products, including volatile organic compounds, oxygenated species, and other trace emissions relevant to air quality and fuel characterisation. The system must be capable of operating as a standalone analytical platform and must also be compatible with a separately procured thermogravimetric analysis (TGA) system for evolved gas analysis workflows. The specification therefore includes requirements for interfacing, gas transfer, and handling of low-concentration, transient species. - Education Procurement Service (EPS)Limerick
LA3541C - RFT for the Supply, Delivery, Installation, Commissioning and Calibration of a Bioreactor Suite for Bioprocess Optimisation and Digestion Fermentation Modelling for University College Dublin
University College Dublin request Tenders for the supply, delivery and installation of a bioreactor platform for small-scale fermentation. The bioreactor platform must be capable of running parallel experiments in all the benchtop bioreactors with independent process control. The platform should consist of 3 x 3000 ml and 7 x 500 ml vessels. Each vessel should have the following accessories/measurements: ● Rushton impeller ● pH ● Dissolved Oxygen ● Heating - Heating Jacket ● Porous sparger ● Coo - University College CorkCorkDeadline: Jul 24
Supply, Delivery, Installation, Commissioning, and Validation of an Integrated Glove Box-Linked Dual Atomic Layer Deposition (ALD) Reactor System with Collocated Ellipsometer System for Tyndall, UCC
Tyndall National Institute, University College Cork (UCC) invites tenders for the supply, delivery, installation, Commissioning, Calibration and Validation of an integrated Atomic Layer Deposition (ALD), Glove Box, and Ellipsometer System, compromising four main components: (i) ALD Reactor 1: Designed for the deposition of 2D dichalcogenide materials, featuring process conditions and precursor delivery systems optimised for chalcogen-based chemistries. (ii) ALD reactor 2: Configured for the deposition of metal oxide films, designed for oxygen-rich precursor processes. (iii) Glove Box Module: Provides a controlled inert atmosphere that connects both ALD reactors, enabling contamination-free sample transfer and handling. (iv) Ellipsometer: Designed to operate both in-situ and ex-situ with each ALD reactor, allowing precise thin-film thickness and optical property characterisation for process monitoring, calibration, and validation. The system must be supplied and installed by the tenderer to ensure full system integration and operational compatibility for Tyndall National Institute. Together, this integrated system will form a key capability for atomic layer processing, supporting advanced thin-film deposition and real-time characterisation for next-generation materials research. - University of Galway (ID 1400)GalwayDeadline: Jul 23
CON1788 Request for Tender for the Supply, Delivery, Installation and Commissioning of a High-Resolution Research grade X-ray Fluorescence (XRF) Core Scanner for University of Galway.
University of Galway invites tenders for the Supply, Delivery, Installation and Commissioning of a High-Resolution Research grade X-ray Fluorescence (XRF) Core Scanner The Discipline of Geography, within the School of Geography, Archaeology and Irish Studies at the University of Galway is actively engaged in research relating to sedimentary archives, including lake, marine, and peat cores, which are critical for reconstructing past environmental and climatic conditions. These research activities require high-resolution, non-destructive analytical techniques to characterise elemental composition and stratigraphy. The acquisition of an XRF core scanner will significantly enhance the Discipline’s analytical capabilities, supporting existing research programmes and enabling new avenues of investigation in environmental and archaeological sciences. The XRF core scanner system is required for the non-destructive analysis of drill cores and wet sediment cores, with elemental detection spanning magnesium (Mg) to uranium (U). The system will be used for advanced research applications in geoscience, environmental science, and related disciplines. The investment in this equipment aligns with the University of Galway’s strategic priorities in sustainability, climate action, and research excellence, and will contribute to strengthening interdisciplinary collaboration within the School and across the wider research community. Note: Tenderers must use the Tender Response Document and other documents provided by the Contracting Authority in preparing their response. The response documents must be uploaded in a ZIP file on eTenders in order to protect the integrity of file names. Please include your company name in the title of each document. - Education Procurement Service (EPS)LimerickDeadline: Jun 29
LA3705C - CFT - SETU - Supply, Delivery, Installation and Commissioning of a Replacement Equipment for the SEAM Research Centre, [3 Lots]
Tenders are sought for the Supply, Delivery, Installation and Commissioning of 3 lots: Lot 1 - Replacement of a High-Resolution X-Ray Computed Tomography (CT) System. Lot 2 - High-Definition Bench-top Digital Microscope System Lot 3 – Replacement of Detector for the GE VTomex L300 Industrial CT System The new equipment must be delivered and installed on the ground floor of SEAM facilities located in the Applied Technology Building on the main campus of SETU Waterford. The contracting authority will take care of all works regarding laboratory preparation (required construction works). For Lots 1 - 3 It is required for the after award the winning Tenderer to conduct an evaluation of the site and site access at SETU and advise SETU of any alterations to services at the location that may be required, prior to delivery and installation. This can be partially or wholly facilitated remotely as required. Date and time to be confirmed with SETU and the winning tenderer. Please confirm compliance. The tenderer MUST allow access to the facilities (supplier site) to witness the factory acceptance testing of the equipment. In case the contracting authority decides not to attend in person, the tenderer will be asked to supply a certificate of the successful factory testing.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 26. Mai 2026.
- Who is the contracting authority?
- The contracting authority is Technological University Dublin (TU Dublin).
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.