European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsTED
Supply and preparation for nuclear environment of an ONH gas analyser in metals
The JRC Karlsruhe plans to purchase a ONH elemental analyser to determine Hydrogen and Oxygen content in irradiated cladding (metal)
Submission deadline: August 12, 2026Type: Tender
Laboratory Instruments
Unlock documents for free
No credit card · Instant access
Content at a glance
The JRC Karlsruhe plans to purchase a ONH elemental analyser to determine Hydrogen and Oxygen content in irradiated cladding (metal)
- Tender type:
- Tender
- Contracting authority:
- European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEs
- Published:
- June 29, 2026
- Deadline:
- August 12, 2026
- Topic:
- Laboratory Instruments
Tender description
The JRC Karlsruhe plans to purchase a ONH elemental analyser to determine Hydrogen and Oxygen content in irradiated cladding (metal)
Further details
After registration, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Documents and attachments
49 files recorded- PDF Notice (BUL)
- PDF Notice (SPA)
- PDF Notice (CES)
- PDF Notice (DAN)
- PDF Notice (DEU)
- PDF Notice (EST)
Related tenders
10- South East Technological University (SETU)WATERFORDDeadline: Jun 29
Tender for the Provision of Oxygen, Nitrogen and Hydrogen (ONH) Analyser
Establishment of a framework agreement for the purchase of an ONH analyser for simultaneous wide-range measurement of oxygen, nitrogen, and hydrogen content in steel, refractory metals, and other inorganic powders. - European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsDeadline: Jul 25
Supply and maintenance of Radiation Portal Monitoring System
The JRC Karlsruhe plans to purchase a stationary spectroscopy-based radiation portal monitor (SRPM) for the detection and identification of radioactive materials in road vehicles such as cars, vans and small cargo trucks. The SRPM shall be installed within the European Nuclear Security Training Centre at JRC Karlsruhe. - European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsDeadline: Aug 17
NL-Petten: New gas detection system and maintenance services for GASTEF
The JRC would like to procure a new gas detection system, consisting of oxygen and hydrogen detectors (approx. 12 oxygen detectors and approx. 4 hydrogen detectors, exact numbers depending on the technology used), and a central control unit, for its High-Pressure Gas Testing Facility (GASTEF) to replace an outdated one. The GASTEF facility is used for the experimental assessment of safety and performance of systems and components under pressurised hydrogen, and the gas detection system has a safety purpose for the facility. Some of the detectors will need to be able to operate in an inert atmosphere, i.e. nitrogen, and be compliant to ATEX zone 2 (Hydrogen) requirements. The procurement will need to include the supply of the gas detection system equipment, its installation and commissioning at the GASTEF facility, and preventive and corrective maintenances for a period of 8 years. - ØyVAR ASSTRAUME
Collection of glass and metal packaging for Øyvar AS
ØyVAR AS invites tenderers to a tender contest for the collection of glass and metal packaging in Øygarden municipality. The aim is to ensure efficient and environmentally friendly handling of glass and metal packaging in accordance with the current rules and the municipality ́s environmental targets. - Dundalk Institute of Technology_1155DUNDALK
Porosity and surface area analyser via gas adsorption
The instrument will be used to determine the physical properties, specifically porosity and specific surface area, of organic and inorganic materials such as biochar. The instrument should use gas adsorption techniques to determine the pore size and surface area of materials, to micro- and nano-scales. Compatibility with Helium, Nitrogen and carbon dioxide gases is required. The instrument should be accompanied by user friendly software, relevant data analyses packages and show routine day-to-day operations within a single analysis screen. The instrument should have at least a 3-station analyser and a sample preparation station. The analyser should deliver fast, accurate and precise evaluation of porosity and specific surface area using up-to-date modelling packages within a reasonably short timeframe. - Atlantic Technological UniversityLetterkenny
26/288 Dynamic Purchasing System for the Supply and Delivery of Metals including Steel, Welding and Metal Fabrication Consumables and Related Equipment for Atlantic Technological University
Atlantic Technological University (ATU) wishes to establish a Dynamic Purchasing System (DPS) for the supply and delivery of Metals including Steel, Welding and Metal Fabrication Consumables and related Metal Fabrication Equipment under three Lots. The DPS will be established for five (5) years and is open for applications from interested parties until 08 February 2031. This is the first stage of the procedures whereby all interested parties may submit a response to the pre-qualification questionnaire appended to this notice. Suppliers meeting the Selection Criteria will be deemed eligible for inclusion on the DPS and will be invited to tender for applicable future competitions. - Atlantic Technological UniversityLetterkenny
26/288 Dynamic Purchasing System for the Supply and Delivery of Metals including Steel, Welding and Metal Fabrication Consumables and Related Equipment for Atlantic Technological University
Atlantic Technological University (ATU) wishes to establish a Dynamic Purchasing System (DPS) for the supply and delivery of Metals including Steel, Welding and Metal Fabrication Consumables and related Metal Fabrication Equipment under three Lots. The DPS will be established for five (5) years and is open for applications from interested parties until 08 February 2031. This is the first stage of the procedures whereby all interested parties may submit a response to the pre-qualification questionnaire appended to this notice. Suppliers meeting the Selection Criteria will be deemed eligible for inclusion on the DPS and will be invited to tender for applicable future competitions. - Donegal Education and Training Board_368Letterkenny
Call for Tenders for The Supply, Delivery and Installation of Metal Fabrication Equipment to Donegal Education and Training Board
Call for Tenders for The Supply, Delivery and Installation of Metal Fabrication Equipment to Donegal Education and Training Board - European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsDeadline: Jul 25
Supply, Installation and maintenance of a PEM Electrolyser for Hydrogen Production at JRC Ispra
The procurement entails the design, manufacturing, delivery, installation, and commissioning of a Proton Exchange Membrane (PEM) electrolysis system for hydrogen production at the JRC Ispra site. The core of the system is a 50 Nm3/h electrolyser (which must be upgradable to 100 Nm3/h) that delivers hydrogen at an outlet pressure of 30 barg. The main equipment will be delivered in a containerized/skid version divided into three specific areas: a control panel area with the AC/DC converter, a water purification unit, and an ATEX-classified area containing the stacks and gas purification treatment. In addition to the containerized unit, the scope of supply includes several external components: - An MV/LV transformer - A thermal management system (dry cooler) - A low-pressure hydrogen storage system consisting of a cylinder rack at 30 bar with a total volume of 5 m3 - A gas blender installed on the outlet piping after the storage Finally, the procurement includes a comprehensive service package covering the Factory Acceptance Test (FAT), Site Acceptance Test (SAT), ATEX verification, staff training, two years of spare parts, and a 3-year maintenance contract. Reason for Purchasing The primary objective of this procurement is to produce green hydrogen by harnessing the renewable energy generated from the JRC Ispra site's internal photovoltaic (PV) plant. Currently, the site has a 1.35 MWp PV installation, which is planned to be expanded to 2 MWp and eventually 3 MWp in the future. Instead of using battery systems, the JRC intends to use the excess energy from this PV plant to power the electrolyser for self-consumption. The hydrogen produced will then be blended into the natural gas pipeline (up to a 10% volume blend) to feed the site's co-generators. A dedicated technical sizing analysis concluded that a modular 2x250 kW electrolyser is the optimal choice, as it offers the best compromise between the available PV power, the number of operating hours, and the demand from - Midtre Namdal Avfallsselskap IKSOverhalla
Framework agreement for waste containers with wheels, for packaging made of glass and metal.
MNA shall introduce changed requirements for source sorting of packaging and as a result of this need for new wheeled containers for separate collection of glass and metal packaging. The objective of the procurement is to establish an appropriate and reliable container system for outdoor use, with robust and clear marked containers. The system shall contribute to efficient collection, reduced missortment and predictable operation. The assignment is for the delivery of wheeled containers for glass and metal packaging in several volume sizes (140 and 240 litres) for outdoor placement. The delivery shall include complete containers with the necessary components for operative use, as well as clear fraction marking. The containers shall be suitable for year round operation in weather prone environments. In addition the tenderer shall deliver a starting package with spare parts to support operation and maintenance.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 12. August 2026.
- Who is the contracting authority?
- The contracting authority is European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEs.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.