Institute of Science and Technology Austria (ISTA)Klosterneuburg
Spectra-Physiscs Mai Tai HP Laser for Optophysiology MP microscope
Purchase of a multi-photon laser for opto-physiology multi-photon microscope
Type: Tender
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Institute of Science and Technology Austria (ISTA)
- Published:
- July 16, 2026
- Deadline:
- Not specified
- Contract value:
- €8,703,618
Tender description
Purchase of a multi-photon laser for opto-physiology multi-photon microscope
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
5 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock1 detail capturedDocument bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock1 detail capturedLots
Procedure data
Unlock5 details capturedPublication number · Procedure reference · Procedure type · Contract type · +1 more
Performance locations
Unlock2 details capturedPerformance locations
Related tenders
7robust ultra-short pulse laser system - PR1182047-2660-W
Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. - Einkauf B12 - Vergabestelle BauMünchen1x robust ultra-short pulse laser system Fraunhofer IOF develops and tests quantum optical communication systems for various scenarios and environments. A central part of this is the targeted and reproducible realisation of modifications in transparent materials such as solids and fibres with the aim of functionalisation. For a specific part of this realisation, a short-pulse laser system is required that meets the following specifications.robust ultra-short pulse laser system - PR1239751-2660-W
Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. - Einkauf B12 - Vergabestelle BauMünchen1x robust ultra-short pulse laser system Fraunhofer IOF develops and tests quantum optical communication systems for various scenarios and environments. A central part of this is the targeted and reproducible realisation of modifications in transparent materials such as solids and fibres with the aim of functionalisation. For a specific part of this realisation, a short-pulse laser system is required that meets the following specifications.Direct Laser Writer
Lunds universitetLundDeadline: Aug 24Lund University, Department of Physics, Lund Nano Lab is acquiring an Direct laser writer / Maskless aligner for optical lithography.Mietung eines tragbaren Lasermessgeräts (Laser Tracker) mit Steuerung für das Labor MAX IV an der Lund Universität
Lunds universitetLundDeadline: Aug 25A procurement of one portable measuring instrument of Laser Tracker type with its controller for MAX IV Laboratory at Lund University.Photocathode Laser System
Helmholtz-Zentrum Dresden-Rossendorf e.V.DresdenHelmholtz-Zentrum Dresden-Rossendorf (HZDR) has been working on the development of a superconducting electron source (SRF gun) for about 20 years. An integral part of this electron source is a photocathode laser which, in combination with a photocathode, uses the external photoelectric effect to generate electron pulses. These pulses are then accelerated by the electric field of the superconducting RF resonator. The required laser wavelength for this purpose is about 260 nm, while the aimed pulse energy at this wavelength is 5 μJ. Detailed requirements in the table below (2. Performance quote) are specified separately for the fundamental wavelength in infrared (IR) and the 4th harmonic in ultraviolet (UV). Pulse repetition rate shall be flexible and reach 2 MHz. The average power in UV has to reach at least 1 W. Laser pulse duration is a key optimization parameter that needs to be variable in the range of 0.3-10 ps FWHM. Moreover, the temporal (longitudinal) profile of the laser pulse overall is important for properties of the generated electron pulse and thus also needs to be adjustable. For this, a spatial light modulator for modifying the spectrum needs to be integrated in the offered system. It is desirable that the manufacturer finds settings of the spectral shaper that result in a flat-top temporal shape of the UV pulse. Given that the temporal shape of a chirped pulse is critical in the planned application, spectral smoothness, stability and absence of long wings or shoulders are of high importance. Spectrum distortions caused by nonlinear effects shall be insignificant even at the maximum required pulse energy. Ability to synchronize the oscillators' repetition rate to a radio-frequency (RF) reference signal is necessary. Achievable integrated time jitter in the range between 10 Hz and 1 MHz of the laser with respect to the reference shall not exceed 100 fs. However, synchronization electronics are not part of the current tender and will be obtained from another source. The oscillator needs to be prepared for repetition rate locking, i.e. contain a short-range and a long-range actuators for fine adjustment of the cavity length. Another aspect of synchronization is the ability to control the repetition rate and the emission time of the laser by an external trigger signal. This ability needs to be available. Reliability and permanent availability (24/7) are of particular importance. The system will be located in an optical laboratory with ±1°C temperature stability. Beside the fulfilment of the criteria described in annex 01A, the scope of deliveries and services includes, that means are to be offered in the quotation: • Factory Acceptance Test (FAT), with proof of fulfilment of the performance requirements • Delivery according to DDP (Incoterms 2010) to the place of usage • Installation und commissioning including On-Site Acceptance Test (OSAT), with proof of fulfilment of the performance requirements • 12 months warranty from OSAT • CE marking • complete manual in English • suitable "water-to-water chiller"A continuos-wave and single-frequency laser source
Helmholtz-Zentrum Dresden-Rossendorf e.V.DresdenA continuos-wave and single-frequency laser source for the visible, near infrared and telecom spectral ranges with output power of at least 200 mW at all opertional walengths. The laser should provide computer-controlled wavelength tuning whithout any required manual change of optics or crystals and without any required realignement. The equipment is procured through the MagKI investment programme which will provide advanced substrate structuring capabilites to the cleanroom which will be used in the final production of magnetic nanodevices for next-gen European based Artifical Intelligence. The bid must include according to the criteria listed under "2. Performance quote" the following items: - computer-controlled tunable laser system - pump laser - coupling module for wavelength meter - computer interface - software for computer-controlled wavelength selection with precise frequency stabilization - CE Marking - installation (SAT) and training at HZDR Beside the fulfilment of the criteria described under "2. Performance quote" of this Annex 01A, the scope of deliveries and services includes: - delivery terms: DDP or DAP Dresden (Incoterms 2020) - please see Annex "Contractual and tendering terms and conditions_EUOV2605" - place of delivery: HZDR, building 707/room 119, Bautzner Landstr. 400, 01328 Dresden - PDF or online version of user documentation in English or German - at least 1yr warranty and remote support during this time - payment after delivery, SAT and training with at least 30 days netInvitation to tender for : RFQ for Texture Analyser / Materials Testing System
Technological University of the Shannon: Midlands Midwest (TUSMM)LimerickTUS requires the supply, delivery, installation and commissioning of a of a computer-controlled Texture Analyser / Materials Testing System suitable for use in research, quality control, and academic laboratory environments.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- No specific submission deadline is currently stated for this notice.
- Who is the contracting authority?
- The contracting authority is Institute of Science and Technology Austria (ISTA).
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.