LuonnonvarakeskusHelsinkiTED
POST NOTIFICATION Procurement of Open-path Ammonia (NH3) Gas Analyzer and Methane (CH4) + Nitrous Oxide (N2O) + Water Vapour (H2O) Analyzer for Eddy Covariance Flux Studies in Natural Resources Institute Finland
Natural Resources Institute Finland (hereafter referred to as "Luke") requests your tender for Open-path Ammonia (NH3) Gas Analyzer and Methane (CH4) + Nitrous Oxide (N2O) Analyzer with this Call for Tenders and its annexes. High precision and fast response Analyzer for Ammonia (NH3) and and Methane (CH4) + nitrous oxide (N2O) Analyzer in...
Measurement Technology
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Luonnonvarakeskus
- Published:
- September 03, 2026
- Deadline:
- Not specified
- Topic:
- Measurement Technology
Tender description
Show full descriptionCollapse description
Natural Resources Institute Finland (hereafter referred to as "Luke") requests your tender for Open-path Ammonia (NH3) Gas Analyzer and Methane (CH4) + Nitrous Oxide (N2O) Analyzer with this Call for Tenders and its annexes. High precision and fast response Analyzer for Ammonia (NH3) and and Methane (CH4) + nitrous oxide (N2O) Analyzer in agriculture environments attached to existing Eddy Covariance equipment and used in Eddy Covariance Flux studies. Ammonia analyzer must function outdoors and both analyzers must provide a scientific accuracy and robustness for long-term environmental monitoring. Procurement is divided in two (2) lots: 1. Open-path analyzer for Ammonia (NH3) 2. Methane (CH4) + Nitrous Oxide (N2O) + Water Vapour (H2O) Analyzer One supplier is chosen for each lot. The subject of the procurement is described in more detail in procurement documents.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
7 data areas available
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock2 details capturedLots LOT-0001 · Lots LOT-0002
Procedure data
Unlock6 details capturedPublication number · Procedure reference · Buyer reference · Procedure type · +2 more
Performance locations
Unlock2 details capturedPerformance locations
Bidders and contractors
Unlock4 details capturedBidders and contractors · Address
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
10Lieferung eines Closed-Cycle-Kryostaten zur Verwendung mit Diamantstempelzellen und kleinem Arbeitsabstand
Der Kanzler der Johann Wolfgang Goethe-Universität, Bereich Finanzen und Controlling, EinkaufsmanagementFrankfurt am MainBeschafft werden soll ein Closed-Cycle-Kryostat-System für wissenschaftliche Untersuchungen unter Tieftemperatur- und Hochdruckbedingungen unter Verwendung von Diamantstempelzellen (DAC).Potentiostat
fem ForschungsinstitutSchwäbisch GmündIm Rahmen des IGF-Projektes KGF-PoKo-LIB (IGF 01IF24319N) soll ein Potentiostat zur Durchführung elektrochemischer Messungen mit Referenzelektroden (Chronopotentiometrie, Cyclovoltammetrie, Impedanzspektroskopie) beschafft werden.Lieferung und Installation Biomechanischer Tester.
Institut für Bioprozess- und Analysenmesstechnik e.V.Heilbad HeiligenstadtDeadline: Sep 14Lieferung und Installation eines Indentationssystems zur biomechanischen Testung von Zellen, Geweben und Biomaterialien gem. Leistungsverzeichnis.Module lightwave component analyzer (ENAS-14.3) - PR1224803-3340-P
Fraunhofer-Gesellschaft zur Förderung der angewandten Forschung e.V. - Einkauf B12 - Vergabestelle BauMünchenDeadline: Aug 311 Stück Module lightwave component analyzer (ENAS-14.3) Messsystem für die Charakterisierung elektrooptischer Komponenten mittels elektro-optischem S-Parameter Test (Lightwave Component Analyzer). Mit dem System sollen Laser, Modulatoren, Detektoren,und integrierte Receiver charakterisiert und getestet werden können. Wichtig ist dabei eine hohe Wiederholbarkeit der Messungen ohne zwischenzeitliche Rekalibrierung. Wichtig sind vor allem folgende Eigenschaften des Messsystems: - Messmöglichkeiten: Elektrisch/Optisch, O/E, E/E und O/O - Netzwerkanalysator mit 2 Ports, Frequenzbereich bis mindestens 40 GHz - Laserwellenlänge 1550 nm und Integrationsmöglichkeit einer externen Laserquelle Optionen: 1.6 Analysator für optische Komponenten/Optischer Netzwerkanalysator automatische Kalibrierung des VNA optional als Ersatz für Pos. 1.5Provision of an Acquisition Channel for Metrology Equipment and Software
The European Joint Undertaking for ITER and the Development of Fusion Energy ('Fusion for Energy')BarcelonaDeadline: Sep 17The scope of this Multiple Framework Service Contract is the provision of metrology instruments together with associated stands, tooling optical targets and specific software programs.Microscale thermophoresis device
Oulun yliopistoOULUDeadline: Oct 09University of Oulu, Biocenter Oulu, seeks a spectral shift and microscale thermophoresis device to characterise qualitatively and determine quantitatively nanoparticle, including protein, interactions in the range of weak to tight binders in solution without immobilization (hereinafter referred to as the "device"). The device must enable the assessment of sample quality and aggregation and differentiating binding events from aggregation. The device will be used for analysis of interactions of fluorescence labelled proteins with small molecules and vesicles. The detection must be independent of the mass ratio of the binding partners. The device must enable fast screening of interactions as well as sensitive affinity measurement. The measurable dynamic range of dissociation constant must be at least in nM -mM range and binding affinity in at least nM -mM range. Low sample consumption (in order of 10 microlitre) and low nanomole of the labeled target is needed for the measurement. The device must enable detection of the interaction based on changes of emission spectrum of exited fluorophore under isothermal conditions and must be able to create a microscopic non-isothermal temperature field (temperature gradient) and determine nanoparticle including protein binding events based on the temperature related intensity change and fluorescence intensity change following thermophoresis under the thermal gradient. Intensity changes and/or spectrum shifts of the fluorescence probe versus ligand concentrations are measured and plotted to calculate the dissociation constant. The device must come with detailed documentation of all features. The device will be part of the Proteomics and protein analysis core facility infrastructure of Biocenter Oulu. The core facility has an open access policy, and the instrumentation and software must be easy to use and maintain. The device must include a user interface to control the operation. The device must be well suited to an academic multi-VV118 HPLC-Massenspektrometer AKH Wien
Wiener Gesundheitsverbund – Vorstandsressort Einkauf (GED EKF)WienDeadline: Sep 24Lieferung, Montage, Anwenderschulung, Technikerschulung (einmaliger Abruf) und Inbetriebnahme von 1 (einem) HPLC-Massenspektrometer am AKH Wien042-26 RMC Großrahmenschergerät 300 x 300 mm inkl. Zubehör
Hochschule Koblenz RMCDeadline: Sep 03. Sehr geehrte Damen und Herren. . Wir beabsichten die Beschaffung folgender Leistung: . 1 Stück Großrahmenschergerät 300 x 300 mm inkl. Zubehör . . Ausführliche Informationen finden sie in der Leistungbeschreibung, welche als Download zu Verfügung steht. .Mehrgasmessgeräte Dräger X-am 8000 mit Zubehör
Bundesrepublik Deutschland, vertreten durch das Bundesministerium des Innern, vertreten durch das Beschaffungsamt des BMIBonnDeadline: Sep 2125 Mehrgasmessgeräte Dräger X-am 8000, Ausführung mit Pumpe und Pumpenadapter, jeweils bestückt und konfiguriert mit folgenden Sensoren: - Dräger Sensor PID-HC - Dräger Sensor XXS Cl2 - Dräger Sensor XXS H2S-LC - Dräger Sensor XXS CO-LC - Dräger Sensor Dual IR-Ex/CO2 ES 25 Stück Induktiv-Lademodul 25 Stück Steckernetzteil 12 V, 5 A, 60 W 25 Stück Hartschalenkoffer 25 Stück SchultertragegurtGNSS-Empfänger
Kreisverwaltung PaderbornPaderbornDeadline: Sep 09Art der Leistung Lieferleistung Umfang der Leistung 2 Stück GNSS-Empfänger 2 Stück Transportkoffer für GNSS-Empfänger + Zubehör 2 Stück Antenne LTE / Radio 4 Stück Akkus für GNSS-Empfänger Ladegerät(e) für 4 Akkus 2 Stück Schnittstelle für die Software Geosoft GeoMobile2 Näheres siehe Vergabeunterlagen.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- No specific submission deadline is currently stated for this notice.
- Who is the contracting authority?
- The contracting authority is Luonnonvarakeskus.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.