LuonnonvarakeskusHelsinkiTED
Liquid chromatograph (UHPLC) with CAD, DAD and QMS detectors
Natural Resources Institute Finland (hereafter referred to as "Luke") requests your tender for ultra-high performance liquid chromatography (UHPLC) system equipped with three detectors; diode array detector (DAD), charged aerosol detector (CAD) and single quadrupole mass spectrometer detector (QMS). The system will be used for analysis of...
Submission deadline: October 05, 2026Type: Tender
Laboratory Instruments
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Luonnonvarakeskus
- Published:
- September 03, 2026
- Deadline:
- October 05, 2026
- Topic:
- Laboratory Instruments
Tender description
Show full descriptionCollapse description
Natural Resources Institute Finland (hereafter referred to as "Luke") requests your tender for ultra-high performance liquid chromatography (UHPLC) system equipped with three detectors; diode array detector (DAD), charged aerosol detector (CAD) and single quadrupole mass spectrometer detector (QMS). The system will be used for analysis of complex extracts of plant and biomass, including quantification and preliminary characterization. The compounds of interest vary, containing compounds such as sugars, phenolic compounds, polyphenols, oligomeric tannins, carbohydrate-lignin oligomers, and polyamines. This tender includes all the necessary equipment that is essential to operate the system, such as nitrogen generator sufficient to operate simultaneously QMS and CAD. Multi-manufacturer configurations of UHPLC and detectors are not accepted. The contract will be made with one supplier. The subject of the procurement is described in more detail in this call of tenders and other procurement documents (Annex 1-5).
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
6 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock6 details capturedBuyer · Address · Contact
Lots
Unlock1 detail capturedLots LOT-0000
Procedure data
Unlock6 details capturedPublication number · Procedure reference · Buyer reference · Procedure type · +2 more
Performance locations
Unlock2 details capturedPerformance locations
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
9Supply and Delivery of Professional Diving Equipment and Suits, Hand-held Metal Detectors, Personal Protection Equipment and Helmets with Visors
OSCEKosovoDeadline: Sep 23Submission deadline: 23 September 2026 at 12:00 EEST, Kyiv time (11:00 Vienna time) The OSCE Support Programme for Ukraine is implementing project “SPU-Support to Environmental Rehabilitation with focus on Building National Humanitarian Mine Action Capacities of Ukraine”. Within above activities the purchasing of professional diving equipment and suits, compressors, hand-held metal detectors, personal protection equipment and helmets with visors for humanitarian demining activities including underwater demining is envisaged for: immediate one-off purchase requirements; for possible future project needs including other OSCE projects. All the equipment shall be provided according to the provided technical specifications and requirements. Bids submitted as separate complete LOTs are accepted. Bidder can bid for one or more LOTs. Bids are not accepted for partial compliance to any LOT. Bids shall be submitted as the following complete LOTs: LOT 1.1/2.1 - Supply and Delivery of Personal Diving Equipment; LOT 1.2/2.2 - Supply and Delivery of Diving Suits; LOT 1.3/2.3 - Supply and Delivery of Compressors; LOT 1.4/2.4 - Supply and Delivery of Hand-held Metal Detectors and Underwater Hand-held Metal Detectors; LOT 1.5/2.5 - Supply and Delivery of Personal Protective Equipment; LOT 1.6/2.6 - Supply and Delivery of Helmets with Visors. Evaluation and award will be made separately for each LOT. For possible future needs under long-term arrangements, it is intended to conclude the contract(s) for a period of three (3) years, with the possibility of two additional one-year extensions up to five (5) years.Nuclear physics detectors
European Commission, DG GROW - Internal Market, Industry, Entrepreneurship and SMEsBrusselsDeadline: Sep 03The Radionuclide laboratories located at the premises of JRC-Geel have a long tradition of more than 57 years. The laboratories are equipped with a variety of instruments, in order to perform measurements of a large number of radionuclides in samples as diversified as reference materials, solutions for standardisation, determination of nuclear decay data and environmental samples. Among the instruments for secondary standardization of radioactivity and radiological characterisation, some of the HPGe Gamma-Ray Spectrometers will need to be replaced in the coming years. Tender consists of: 1.1 Coaxial HPGe 1.2 Small Broad energy range HPGe 1.3 Large Broad energy range HPGe 1.4 Ultra-low energy germanium detectors 1.5 MaintenanceGe-detector
Helmholtz-Zentrum Dresden-Rossendorf e.V.DresdenDeadline: Sep 15A multi-element detector with high purity Germanium discrete pixel array is to be procured for the spectroscopy measurement station at the Rossendorf beamline (ROBL) in 38043 Grenoble Cedex 9, France. The detector is primarily intended for use in • X-ray absorption spectroscopy (XAS/XANES/EXAFS) in fluorescence detection geometry with a high solid angle • X-ray fluorescence spectroscopy (XRF) on samples containing light and heavy elements, including f-block compounds (lanthanides, actinides) The detector should be designed for operation under conditions involving high-flux synchrotron radiation, enabling research in the field of f-element chemistry and speciation analysis (lanthanides, actinides), as well as environmental and geochemical sample characterization. In particular, operation in the hard X-ray range of 5-30keV, a high count rate per element, and other requirements as specified below make it possible to measure even the lowest concentrations for this type of experiment. Beside the fulfillment of the criteria described under 2. Performance quote of this Annex A, the scope of deliveries and services includes (and will be included in the offer): - 12 month warranty - SAT at the place of installation - delivery and installation location/ place of performance: Helmholtz-Zentrum Dresden-Rossendorf e.V (Location: Grenoble) c/o European Synchrotron ESRF 71 Avenue des Martyrs 38000 Grenoble FRANCE VAT ID: FR87914311840 - condition of delivery: DDP/ DAP (Incoterms 2020) to the place of performance - technical data sheet, maintenance schedule - manual in German and/ or EnglischHigh-Resolution Particle and Cell Sizing, Counting and Distribution Device
Trinity College Dublin the University of Dublin_336DublinThe system must be a benchtop instrument able to measure particles concentration and size profile in biological and other liquid samples as small as 200 nm without additional processing (i.e. operate using the coulter principle or equivalent and be able to measure large protein aggregates, blood platelets and characterise mammalian cells or spheroids without the need of using nucleus staining). It must deliver accurate, reproducible size and concentration measurements across 0.2–1,600 μm in samples of 10-2000 µL, support volumetric flow mode, data reprocessing and ISO 9276-1 reporting. The instrument must feature user-friendly software, mercury-free metering, robust quality control, and be EU Annex 11 of the Good Manufacturing Practice (GMP) Guideline compliant and or FDA 21 CFR Part 11 compliant.Analytical laboratory equipment set for the determination of microcystins and chemical monitoring, including the determination of bisphenol A, in water using liquid chromatography and mass spectrometry methods with sample preparation systems (DK 021:2015 - 38430000-8 Detectors and analyzers)
STATE INSTITUTION "LVIV OBLAST CENTER FOR DISEASES CONTROL AND PREVENTION OF THE MINISTRY OF HEALTH OF UKRAINE" (SI "LVIV OCDC MOH")LvivPurchase of a analytical laboratory equipment set for the determination of microcystins and chemical monitoring, including the determination of bisphenol A, in water using liquid chromatography and mass spectrometry methods with sample preparation systems, quantity 1 set, according to the scope of the Technical SpecificationRFI - 1105601 UiO Life Sciences user equipment. K946.01.02 Dissolution tests with probes
STATSBYGGOSLODeadline: Sep 25Statsbygg is constructing the new Life Science Building for the University of Oslo and Oslo University Hospital on behalf of the Ministry of Education and Research, with South-Eastern Norway Regional Health Authority as co-client. The building will provide workspace for approximately 1,600 employees and 1,600 students. Ground and excavation works commenced in the second quarter of 2019, and completion is planned for the end of 2026. The facility will bring together various academic environments to collaborate across disciplines, developing new solutions to major challenges in health and sustainability, with access to state-of-the-art equipment required to support world-class research, education, and innovationAgnostic Slide scanner with integrated spectral unmixing
Kungliga Tekniska högskolanSTOCKHOLMDeadline: Oct 05The purpose of this purchase is to acquire a slide scanner capable of imaging and detecting signals in both brightfield and fluorescence. The system will be used daily for scanning tissue sections on microscope slides and must support flexible marker detection across multiple wavelengths, with sensitive autofocus suitable for different tissue types. Due to extensive use, the scanner must be fast, reliable, and capable of continuous operation over long working hours.Digital microscopes
Dalarna Science ParkBorlängeDeadline: Sep 24The equipment covered by this procurement forms part of the establishment of the Materials Connection Arena (MCA), a new regional knowledge and innovation environment for advanced materials characterization, as well as industry-oriented research and collaboration in North Central Sweden. The initiative aims to strengthen the region's capabilities in research, innovation, skills development, and knowledge transfer by creating a shared platform through which academic institutions, research organizations, and industry stakeholders will gain access to advanced analytical equipment and specialist expertise. This procurement comprises two key instruments that will form an important part of the analytical infrastructure of the Materials Connection Arena: 1. A digital microscope system with integrated or fully compatible LIBS-based elemental analysis (Laser-Induced Breakdown Spectroscopy) for advanced optical characterization, dimensional measurement, documentation, failure analysis, and material identification. 2. A surface metrology and 3D surface characterization system for high-resolution measurement of surface geometry, surface roughness, topography, dimensional inspection, and comparison against CAD models and design specifications. They will be used for research, education and training, industrial problem-solving, product development, material selection, reverse engineering, failure investigations, quality assurance, and advanced characterization of metallic, polymeric, ceramic, composite, and emerging materials. Accordingly, the equipment shall be well suited for both academic research and industrial applications and shall be capable of supporting a broad range of current and future challenges in materials engineering, product development, and sustainable industrial transformation. The equipment is expected to contribute to strengthened collaboration between academia and industry and enable enhanced research, innovation, and development capacity for companies and hiUHPLC–MS/MS System mit Dreifach-Quadrupol-Massanalysator
University of CyprusAglantziaDeadline: Sep 29ULTRA-HIGH PERFORMANCE LIQUID CHROMATOGRAPHY–TANDEM MASS SPECTROMETRY (UHPLC–MS/MS) SYSTEM WITH TRIPLE QUADRUPOLE MASS ANALYZER
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 05. Oktober 2026.
- Who is the contracting authority?
- The contracting authority is Luonnonvarakeskus.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.