Danish Ministry of Defence Acquisition and Logistics OrganisationBallerupTED
Headwear for the Danish Defence
Danish Ministry of Defence Acquisition and Logistics (hereafter, DALO) and the Danish Emergency Management Agency (hereafter, DEMA), are putting acquisition of Headwaer up for af tender. The primary function of the headwear items is to provide protection for the head against wind and weather conditions. Most of the items are being used on...
Submission deadline: September 14, 2026Type: Tender
Workwear, Uniforms, Protective Clothing
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- Danish Ministry of Defence Acquisition and Logistics Organisation
- Published:
- June 21, 2026
- Deadline:
- September 14, 2026
- Topic:
- Workwear
Tender description
Danish Ministry of Defence Acquisition and Logistics (hereafter, DALO) and the Danish Emergency Management Agency (hereafter, DEMA), are putting acquisition of Headwaer up for af tender. The primary function of the headwear items is to provide protection for the head against wind and weather conditions. Most of the items are being used on a daily basis and some of the products are used for specified tasks. The headwear will be used by men and women for both training and actual military operations.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
7 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock1 detail capturedLots LOT-0000
Procedure data
Unlock6 details capturedPublication number · Procedure reference · Buyer reference · Procedure type · +2 more
Performance locations
Unlock2 details capturedPerformance locations
Bidders and contractors
Unlock3 details capturedBidders and contractors · Address · Contact
Publisher
Unlock6 details capturedPublisher · Address · Contact
Related tenders
7Acquisition of Military Patrol Boots to the Danish Defence
Danish Ministry of Defence Acquisition and Logistics OrganisationBallerupDeadline: Jun 18The Danish Ministry of Defence Acquisition and Logistics Organisation (DALO) seeks to renew framework agreements for military Patrol Boots. The boots are used across all armed services, must be light, flexible, breathable, provide stability and shock absorption, with a minimum 12-month lifetime. Two parallel framework agreements will be awarded to accommodate different soldier needs.Micro FPV-training UAS for the Danish Defence
Danish Ministry of Defence Acquisition and Logistics OrganisationBallerupUnder the Dynamic Purchasing System for Unmanned Aerial Systems, DALO has purchased 25 sets of micro FPV unmanned aerial systems from AA Defence ApS. One set contains 5 unmanned aerial vehicles and spare parts. The systems are multicopters and cybersecure. The systems will be used for training. Due to platform-technical limitations, this notice incorrectly states that the legal basis for this DPS is Directive 2014/24/EU. As the legal basis for the dynamic purchasing system is deemed to be the Defence and Security Directive, DALO's purchase of unmanned aerial systems falls under the scope of directive 2009/81/EC.Acquisition of Desert Boots to the Danish Defence
Danish Ministry of Defence Acquisition and Logistics OrganisationBallerupDeadline: Jun 18The Danish Ministry of Defence Acquisition and Logistics Organisation (DALO) wishes to renew the framework agreements concerning the military Combat Boot system. The system consists of 7 framework agreements including specific boots and an assortment of various related footwear whereas this Contract Notice covers the Desert Boots. The Desert Boot is part of the soldier’s equipment. Without boots that fits ergonomically, and/or suit the environment, the soldier cannot perform to the best of his/her abilities. Therefore this tender aims to provide each soldier (male and female) with boots, that fit the soldiers individually and provide the necessary protection in different environments. The Desert Boot will be used by soldiers working in offices most of their time, but the Desert Boot shall also function as a boot for use in dry warm desert areas. It is important that the Desert Boot is breathable, light, flexible and has shock absorption in the midsole. But at the same time provides enough stability to the foot and ankle. The Desert Boot must have a lifetime of minimum 12 months of military use. To fully understand the requirements of the Desert Boot see Appendix 1 in the tendering material. The evaluation of the boots includes tests of products samples. DALO is only looking for high quality boots, and after the Tenderer has made his best and final offer (BAFO) the offered boot must reach a minimum quality level threshold of at least 7,3 (from 0-10) to continue in the final tendering procedure. DALO reserves the right to award the Agreement based on the INDO1 or on any additional INDOs. In that case DALO will request receipt of all product samples mentioned in Enclosure E – DALO’s test schedule and procedure for testing and evaluation in accordance with Enclosure C – The award criterion and evaluation method - that otherwise should be submitted in connection with BAFO if DALO chooses to award the Agreement based on INDO1 or on any additional INDOs. This also means complying with the minimum quality level threshold. This tender is part of DALO’s larger acquisition of Combat Boots. The total acquisition consists of 5 individual tendering procedures and a total of 7 agreements: 1 tender for Combat Boots with 2 winners (2 parallel framework agreements) 1 tender for Patrol Boots with 2 winners (2 parallel framework agreements) 1 tender for Desert Boots 1 tender for Cold Weather Boots 1 tender for Combat Safety Boots If a Candidate/Tenderer wants to make an PQQ application/offer for one of the other agreements, the Candidate/Tenderer has to put forward the application/offer in the respective tendering procedure regarding that specific boot. One (1) Candidate can only make one (1) application in each tendering procedure.Acquisition of Military Combat Boots to the Danish Defence
Danish Ministry of Defence Acquisition and Logistics OrganisationBallerupDeadline: Jun 18DALO renews Framework Agreements for the military Combat Boot system. This notice covers Combat Boots used across all Danish armed services as primary footwear for daily training, exercises, and combat. The boots must ergonomically fit male and female soldiers, provide protection in various environments, and be used with a Patrol Boot. The Combat Boot supports heavy loads up to 40 kg, requires high stability and shock absorption, and has a minimum 12-month lifetime. Two parallel Framework Agreements will be awarded to accommodate different soldier needs.Acquisition of Cold Weather Boots to the Danish Defence
Danish Ministry of Defence Acquisition and Logistics OrganisationBallerupDeadline: Jun 18The Danish Ministry of Defence Acquisition and Logistics Organisation (DALO) wishes to renew the framework agreements concerning the military Combat Boot system. The system consists of 7 framework agreements including specific boots and an assortment of various related footwear whereas this Contract Notice covers the Cold Weather Boots. The Cold Weather Boot shall be for use in cold and dry environment on Greenland and similar areas. DALO is looking for a Cold Weather Boot with a removable warm inner boot and with a sole for use in icy environments like artic areas and similar. The inner boot shall be replaceable. The Cold Weather Boot shall be offered in 2 different versions. The Primary version is for normal military use in very cold and dry environment and the second version is for use in the same area but it shall be possible to use with Cross Country skis 90mm wire bindings. Only the primary version will be evaluated. The Cold Weather Boots must have a lifetime of minimum 12 months of military use. To fully understand the requirements of the Cold Weather Boots see Appendix 1 in the tendering material. The evaluation of the boots includes tests of products samples. DALO is only looking for high quality boots, and after the tenderer has made his best and final offer (BAFO) the offered boot must reach a minimum quality level threshold of at least 7,3 (from 0-10) to continue in the final tendering procedure. DALO reserves the right to award the Agreement based on the INDO1 or on any additional INDOs. In that case DALO will request receipt of all product samples mentioned in Enclosure E – DALO’s test schedule and procedure for testing and evaluation in accordance with Enclosure C – The award criterion and evaluation method - that otherwise should be submitted in connection with BAFO if DALO chooses to award the Agreement based on INDO1 or on any additional INDOs. This also means complying with the minimum quality level threshold. This tender is part of DALO’s larger acquisition of Combat Boots. The total acquisition consists of 5 individual tendering procedures and a total of 7 agreements: 1 tender for combat boots with 2 winners (2 parallel framework agreements) 1 tender for patrol boots with 2 winners (2 parallel framework agreements) 1 tender for desert boots 1 tender for cold weather boots 1 tender for combat safety boots If a Candidate/Tenderer wants to make an application/offer for one of the other agreements, the Candidate/Tenderer has to put forward the application/offer in the respective tendering procedure regarding that specific boot. One (1) Candidate can only make one (1) application in each tendering procedure.New exhibition design for The Kingdom’s Treasury at Rosenborg Castle for The Royal Danish Collection
De Danske Kongers Kronologiske Samling på RosenborgKøbenhavn KDeadline: Jul 30The purpose of this invitation to tender (ITT) is to select a lead consultant with responsibility for the development and form of exhibition design for The Kingdom’s Treasury at Rosenborg Castle for The Royal Danish Collection. See also appendix 4. Project Brief. The exhibition is part of the overall development of the project for a new version of The Kingdom’s Treasury at Rosenborg Castle site, which will create new exhibition spaces for artefacts with unique historic, cultural and national significance from the Royal Danish Collection. Rosenborg Castle’s new treasury is intended as an experience that visitors will find impressive and moving. The appointed exhibition designer will be responsible for developing the interpretation concept and exhibition design in close collaboration with the Royal Danish Collection and relevant stakeholders, including foundations, the Agency for Culture and Palaces and other associated consultants. The contract involves the development of the narrative and spatial design concept and detailed planning as the basis for tender and production of exhibition equipment. The commission also includes consultancy in connection with the purchase, production and installation of all the exhibition elements included in the project scope. Production and installation are expected to be put out to tender as an all-inclusive contract or as partial contracts, and the Exhibition Designer will be required to assist in the preparation and execution of these contracts. The tender process for the exhibition design is carried out before the conclusion of the competition for the design of the building that will house the exhibition. The process will therefore be based on an exhibition area with a fictitious floor plan. Importantly, it should be noted that the tenderers are not expected to present a finished proposal but rather ideas, concepts and proposals that will be developed in a collaborative process with the Royal Danish Collection and the appointed lead consultants for the building contract. The Royal Danish Collection is not legally obligated to put this contract out to tender but has chosen to do so, following the regulations in the Danish Public Procurement Act. The design Contract must be tendered as a single whole, as there must be one responsible Supplier for the design deliverable. Accordingly, it is not divided into multiple consultancy agreements, as this would not result in a coherent expression for the exhibition. At Byggeweb, the name of the tender is: TN122881A The Kingdoms Treasury - Exhibition DesignRe-tender for fasteners and rail pads for the sleeper types: S99, SB16 & S16 for use in the Danish rail network (1)
BanedanmarkKøbenhavn VDeadline: Jun 25In accordance with the provisions of Directive 2014/25/EU (the Utilities Directive as implemented by Executive Order no. 1078 of 29 June 2022 on procurement by entities operating in the water, energy, transport and postal services sectors), a framework agreement for Fasteners for Banedanmark’s monoblock sleepers is put out to tender. The framework agreement gives Banedanmark a right, but not an obligation, to order the above-mentioned fasteners and rail pads. The Framework Agreement is exclusive regarding supply of fasteners to be used at Banedanmark's Sleeper Factory. Fasteners to be used in connection with maintenance and replacement of existing fasteners in Banedanmark’s infrastructure are not covered by this agreement. The execution of the Framework Agreement is divided into three phases: (1) Design, Validation and Product Type Acceptance Phase (2) Retrofitting of Sleeper Factory Phase (3) Manufacturing and Delivery Production Phase For more information reference is made to the tender material.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 14. September 2026.
- Who is the contracting authority?
- The contracting authority is Danish Ministry of Defence Acquisition and Logistics Organisation.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.