FAONiger
GCP/BHU/016/EC-Procurement of Materials, Equipment and Supplies for Bumthang Oats Processing units, Home-Based Millet Value Addition Unit at Orong, S/Jongkhar and Registered GI Cooperatives
The Food and Agriculture Organization of the United Nations (FAO) invites you to submit an offer for the procurement of Materials, Equipment and Supplies for Bumthang Oats Processing units, Home-Based Millet Value Addition Unit at Orong, S/Jongkhar and Registered GI Cooperatives to be delivered to Department of Agricultural Marketing & Co...
Submission deadline: September 14, 2026Type: Tender
Process Technology
Unlock documents for free
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- FAO
- Published:
- August 25, 2026
- Deadline:
- September 14, 2026
- Topic:
- Process Technology
Tender description
Show full descriptionCollapse description
The Food and Agriculture Organization of the United Nations (FAO) invites you to submit an offer for the procurement of Materials, Equipment and Supplies for Bumthang Oats Processing units, Home-Based Millet Value Addition Unit at Orong, S/Jongkhar and Registered GI Cooperatives to be delivered to Department of Agricultural Marketing & Cooperatives, MoAL, Thimphu . If you are interested in submitting an offer, please make sure to have, at least, a UNGM Basic Registration with FAO (www.ungm.org). Instructions on how to access FAO tender documents through UNGM are attached to the present Notice under the “DOCUMENTS” tab; please follow these instructions when submitting your bid. OFFERS WILL ONLY BE ACCEPTED IF SUBMITTED THROUGH THE UNGM PORTAL. OFFERS NOT SUBMITTED THROUGH THE UNGM PORTAL WILL BE INVALIDATED. Only National Suppliers are allowed to submit the Quotation Many thanks and best regards, FAO PROCUREMENT SERVICE
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
Unlock 30 days free
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
3 data areas available
Unlock 30 days free
30 days free · no credit card · cancel anytime
Related tenders
10GCP/CMB/044/GCF x Coconut Grinding Machines and Compost Mixer Machines
FAONigerDeadline: Sep 23The Food and Agriculture Organization of the United Nations (FAO) kindly invites you to submit an offer for the procurement of Six (6) Coconut Grinding Machines and four (4) Compost Mixer Machines to be delivered to Siem Reap Provine, Cambodia. If you are interested in submitting an offer, please make sure to have, at least a UNGM Basic Registration with FAO (www.ungm.org). Pre-bid Conference: FAO will arrange the pre-bid conference via the Microsoft Teams application on 14 September 2026 at 10:00 a.m., Phnom Penh, Cambodia time (GMT +7). The login ID for the Microsoft Teams meeting is: Meeting ID: 365 352 267 610 532 Passcode: 6wU9hU2P FAO will prepare the pre-bid meeting Minutes and share them with all bidders that expressed interest in this tender in UNGM. FAO will also share the above Microsoft Teams invitation link through UNGM with all bidders who expressed interest in this solicitation through UNGM. The bidders may download the Microsoft Teams application from this link: https://www.microsoft.com/en-us/microsoft-teams/download-app Instruction on how to access FAO Tender documents through UNGM are attached to present Notice under the ‘DOCUMENT’ Tab; please follow these instructions when submitting your bid. OFFERS WILL ONLY BE ACCEPTED IF SUBMITTED THROUGH THE UNGM PORTAL. OFFERS NOT SUBMITTED THROUGH THE UNGM PORTAL WILL BE INVALIDATED. Best regards, FAO PROCRUEMENT SERVICERe-Advertisement for Procurement of Agro Processing Machines
UN-WomenLebanonDeadline: Sep 04Dear Sir/Madam, The United Nations Entity for Gender Equality and the Empowerment of Women, hereinafter referred to as UN Women hereby invites prospective vendors to submit a quotation(s) in accordance with the Request for Quotation (RFQ) documents, including General Conditions of Contract (GCC) and the terms as set out in this RFQ. Existing Suppliers: Navigate to the Quantum Supplier Portal (http://supplier.quantum.partneragencies.org/) to log in to the system.New Suppliers: If you are viewing this notice on UNGM, click on "Links" tab >> "Supplier Registration" >> “Go to link” and you will be re-directed to the registration page of the Quantum Supplier Portal. To view the solicitation documents - click on "Links" tab >> "Negotiation Document(s)" >> “Go to link”. Please ensure to navigate to "Please click on this link before accessing the Negotiation Document(s) link" - this action needs to be done once to enable the access to the solicitation documents. For more information, see the “UN Women Quantum supplier guideline”.Supply and installation of Solar Food Dryer Units - Tuvalu
UNDPJordanDeadline: Sep 16Supply and installation of Solar Food Dryer Units - Tuvalu Please indicate whether you intend to submit a bid by creating a draft response without submitting directly in the system. This will enable the system to send notifications in case of amendments of the tender requirements. Should you require further clarifications, kindly communicate using the messaging functionality in the system. Offers must be submitted directly in the system following this link: http://supplier.quantum.partneragencies.org using the profile you may have in the portal. In case you have never registered before, you can register a profile using the registration link shared via the procurement notice and following the instructions in guides available in UNDP website: https://www.undp.org/procurement/business/resources-for-bidders. Do not create a new profile if you already have one. Use the forgotten password feature in case you do not remember the password or the username from previous registration. Search for the specific tender using search filters and subscribe to the tender in order to get notifications in case of amendments of the tender document. If you need support with the online system, you can contact the contact details of this tender as indicated in the solicitation document. [UNDP OFFICE UNDP-FIJIPROCUREMENT UNIT]Supply and installation of Automatic Heat Sealer and Dual Lidder
Molaga Honey LtdCorkDeadline: Sep 24Molaga Honey Ltd invites tenders for the supply, installation, delivery, and commissioning of machinery to support automation in a food production environment. This project aims to improve efficiency, hygiene standards, and production through integration of key automated equipment. Equipment includes: An Automatic Capper, capable of capping both jars and squeezies. This machine should have linear height control, so that we can adjust the height for jars and squeezies. An automated inline heat sealer system for high-volume production. Heat sealing creates airtight barriers, preventing oxygen, moisture, and contaminants from compromising our honey products in squeezy bottles. For Molaga Honey Ltd, this means there are fewer product returns, lower waste costs, and improved stock rotation flexibility. All equipment must be suitable for food-grade, high-care environments, constructed primarily of stainless steel, and compliant with relevant EU food safety and CE machinery regulations. Suppliers must provide full installation, commissioning, and operator training. Tenders will be evaluated on expertise, technical compliance, lead time, warranty terms, and overall value for money.Framework agreement for delivery and service of battery storage projects in Germany for Trianel Energieprojekte GmbH & Co. KG
Trianel Energieprojekte GmbH & Co. KGAachenDeadline: Sep 14TEP is looking for up to six framework agreement partners as suitable suppliers for the supply of the core components consisting in particular of battery storage, battery inverter, transformer station and battery management system (BMS) and power plant controller. The supplier is also responsible for the commissioning of the components it supplies. In addition, a long-term service contract is to be awarded, which includes warranty extensions and is intended to ensure the performance of the system. After successful participation in the participant competition, selected companies will be invited to submit bids on the basis of a project profile including performance requirements and a term sheet. During the bidding phase (following the conclusion of the prequalification process), bidders are required to provide cost estimates for two specific projects. TEP intends to award these specific projects directly to the best bidder(s) upon awarding the framework agreement. However, TEP also reserves the right not to award the projects to be costed, but rather to use them solely as a basis for selection when awarding up to six framework agreements, based on the award criteria. Consequently, there is no entitlement to be awarded a contract. Project No. 1 is located in Mecklenburg-Western Pomerania with a volume of 100 MW / 400 MWh. Project No. 2 is located in North Rhine-Westphalia with a volume of 20 MW / 40 MWh. TEP reserves the right to transfer call-offs or individual orders placed under the framework agreements to affiliated legal entities. This means that TEP will not necessarily be the contracting party for the individual orders placed under the framework agreements. This applies to subsidiaries of Trianel GmbH, of Trianel Flexibilitätsprojekte GmbH & Co. KG or Trianel Energieprojekte GmbH & Co. KG that are yet to be established, as well as the following companies affiliated with TEP: - TEP Amphitrite GmbH & Co. KG - TEP Arkas GmbH & Co. KG - TEP AT GmbH - TEP Bellona GmbH & Co. KG - TEP Epsilon GmbH & Co. KG - TEP Eunomia GmbH & Co. KG - TEP Fortuna GmbH & Co. KG - TEP Irene GmbH & Co. KG - TEP Kalliope GmbH & Co. KG - TEP Lutetia GmbH & Co. KG - TEP Massalia GmbH & Co. KG - TEP Netze GmbH & Co. KG - TEP Thalia GmbH & Co. KG - TEP Themis GmbH & Co. KG - TEP Vesta GmbH & Co. KG - TEP Victoria GmbH & Co. KG - Infrastruktur Kamerland GmbH & Co. KG - TAP Windprojekte GmbH & Co. KG Further information can be found in the procurement documents that will be issued after the conclusion of the participation competition. The actual demand-or the scale of the framework agreements to be awarded-is difficult to forecast, particularly due to the unpredictability of the required battery storage capacity. Based on the estimated demand volumes, the total volume under the framework agreement is estimated to be approximately 8 GWh over the contract term of up to eight years. The maximum volume applicable under the framework agreement is 10 GWh.RFQ for Tools, Machinery, and Equipment for the Residual Plastic Recovery System
UNDPJordanDeadline: Sep 10Background of Residual Plastic Recovery System (RPRS) UNDP is supporting sustainable solid waste management interventions in Cox’s Bazar, including efforts to improve resource recovery and reduce the volume of waste requiring final disposal at sanitary landfill sites. As part of this effort, UNDP plans to introduce Residual Plastic Recovery Systems (RPRS) at two locations: the Sanitary Landfill Site in Camp 20 Extension, Ukhiya, and the Teknaf Material Recovery Facility (MRF) Site near Boat Ghat Bazar, Teknaf, Cox’s Bazar. The RPRS is designed to support the recovery and processing of residual plastic and polythene waste generated from camp-based and municipal solid waste management systems. The system will help recover plastic-rich waste fractions that would otherwise be sent to landfill and process them through cleaning, crushing, washing, drying, extrusion and pelletizing. Through this process, loose residual plastic and polythene waste will be converted into a more concentrated and manageable form, such as processed plastic blocks or pellets. This will make the recovered plastic easier to store, transport and link with relevant recycling markets, where it can be used as raw material for further production. In this way, the RPRS will help improve the marketability of residual plastic waste and support circular economy opportunities. By reducing the volume of loose plastic waste entering the landfill, the RPRS is expected to help preserve remaining landfill capacity and improve landfill operations. It will reduce bulky, loose and difficult-to-compact plastic waste, thereby making compaction, covering and overall landfill management more stable and efficient. To ensure effective operation, the RPRS will require appropriate infrastructure, equipment, operational space, utility support, drainage, ventilation, occupational safety measures and environmental protection arrangements. The facilities will include provisions for receiving and temporarily storing raw plastic waste, feeding and processing materials, operating and maintaining machinery, moving workers and materials safely, and storing processed plastic materials and pellets. The proposed procurement packages under the RPRS will support the establishment of the required civil infrastructure, solar-based power system, and operational tools, machinery and equipment. Together, these packages will enable the installation and operation of the RPRS facilities and contribute to improved residual plastic recovery and more sustainable solid waste management in Cox’s Bazar. Interested suppliers must submit their offer directly in the system as instructed in the solicitation document, following the instructions in the available user guide. In case you have never registered before, you can register a profile using the registration link shared via the procurement notice and following the instructions in guides available in the UNDP website: https://www.undp.org/procurement/business/resources-for-bidders. Do not create a new profile if you already have one. Use the forgotten password feature in case you do not remember the password or the username from previous registration. Search for the specific tender using search filters and subscribe to the tender in order to get notifications in case of amendments of the tender document. If you need support with the online system, you can contact the contact details of this tender as indicated in the solicitation document. UNDPBD Procurement UnitLA3215C-UCC-CFT for the Supply of a Suite of Plasma Etcher and Plasma Deposition Tools, 4 Lots
Education Procurement Service (EPS)LimerickDeadline: Jul 31Tenders are sought for the supply delivery, installation and commissioning of a suite of tools in 4 Lots for silicon-based and dielectric materials for University College Cork. The new plasma tools will enhance the capabilities at the Tyndall National Institute for the fabrication of semiconductor devices, especially silicon microelectronics and silicon MEMS, but also other materials such as germanium and silicon carbide. We invite proposals for the following lots; Lot 1 Plasma Etcher Silicon Dielectrics, advanced plasma etching system capable of etching for polysilicon poly-Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 2 Plasma Etcher Metals Piezoelectrics, advanced plasma etching system capable of etching for aluminium Al and alloys molybdenum Mo aluminium scandium nitride AlScN thin films using medium high-density plasma processes. Lot 3 Plasma Etcher Slow and Controllable Rate Atomic Layer Etch for Silicon Dielectrics, advanced plasma etching system capable of both conventional high-rate etching and slow and controllable rate atomic layer etching for silicon Si silicon dioxide SiO2 silicon nitride SiN thin films using medium high-density plasma processes. Lot 4 Plasma Deposition PECVD, advanced plasma enhanced chemical vapour deposition system capable of depositing dielectric SiO2, SiN and amorphous a-Si thin films on semiconductor substrates. This equipment will be essential for etching and depositing a range of materials used in the fabrication of silicon microelectronics, silicon photonics and silicon MEMS devices. The ideal tools will offer precision, reliability, and efficiency to meet the requirements for etching and deposition on both 100 mm and 200 mm diameter wafers. Tenderers with cutting-edge solutions that can achieve these high standards are encouraged to submit their proposals for this vital component in our technological advancement.Machine & Equipment: Tomato Processing Machine and Fruit & Vegetable Dehydrator
UNDPJordanDeadline: Sep 01Machine & Equipment: Tomato Processing Machine and Fruit & Vegetable Dehydrator Interested suppliers must submit their offer directly in the system as instructed in the solicitation document, following the instructions in the available user guide. In case you have never registered before, you can register a profile using the registration link shared via the procurement notice and following the instructions in guides available in the UNDP website: https://www.undp.org/procurement/business/resources-for-bidders. Do not create a new profile if you already have one. Use the forgotten password feature in case you do not remember the password or the username from previous registration. Search for the specific tender using search filters and subscribe to the tender in order to get notifications in case of amendments of the tender document. If you need support with the online system, you can contact the contact details of this tender as indicated in the solicitation document. UNDP Türkiye Country Office, Procurement Unit.Supply and delivery of equipment on compliance for highly viable, market-ready enterprises in the Bangsamoro Autonomous Region in Mu slim Mindanao (BARMM), the Philippines. UNIDO Project “Bangsamoro Agri-Enterprise Programme - Inclusive Agribusiness Develo
UNIDOPhilippinesDeadline: Sep 01Tendering Text: Supply and delivery of equipment on compliance for highly viable, market-ready enterprises in the Bangsamoro Autonomous Region in Muslim Mindanao (BARMM), the Philippines. UNIDO Project “Bangsamoro Agri-Enterprise Programme - Inclusive Agribusiness Development for Human Security”.Complete Automatic Rice Processing Mill and Transportation
FAONigerDeadline: Aug 31Complete Automatic Rice Processing Mill and Transportation
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 14. September 2026.
- Who is the contracting authority?
- The contracting authority is FAO.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.