BECHTEL POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ,GdanskTED
Electric Auxiliary Boilers
The scope of work for this package consists of design, furnishing materials, fabrication, inspection, testing, and documentation for packaged electrode type electric boiler, deaerator, blowdown flash tank, boiler feed system, chemical feed system complete with all required controls and instrumentation. The auxiliary boiler has estimated n...
Generators, Valves & Fittings, Measurement Technology, Process Technology
No credit card · Instant access
Content at a glance
- Tender type:
- Tender
- Contracting authority:
- BECHTEL POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ,
- Published:
- July 19, 2026
- Deadline:
- August 19, 2026
- Topic:
- Generators
Tender description
Show full descriptionCollapse description
The scope of work for this package consists of design, furnishing materials, fabrication, inspection, testing, and documentation for packaged electrode type electric boiler, deaerator, blowdown flash tank, boiler feed system, chemical feed system complete with all required controls and instrumentation. The auxiliary boiler has estimated net steam output of 46,000 kg/hr at 13.79 bar. The packaged boiler shall be designed, fabricated, tested and stamped in accordance with EN standards; including but not limited to: a. PN-EN 13445 Unfired Pressure Vessels b. PN-EN 12953 Shell Boilers NOTE: The estimates provided above are APPROXIMATE only. The intent is to give bidders an idea of the scale of the project. Actual numbers will be included in official bid package.
Further details
With free access, documents, deadlines and submission notes are available in a structured format.
- Core requirements of the tender prioritized and prepared
- Deadlines, eligibility criteria and documents in one workflow
- Guidance for structured bid preparation
- Automatically discover matching follow-up tenders
30 days free · no credit card · cancel anytime
All procurement details
Buyer, lots, participants, locations, documents, and procedure data have already been captured. Open any area to see the complete information in your workspace.
6 data areas available
30 days free · no credit card · cancel anytime
Documents
Unlock50 details capturedDocuments · Document bundle
Buyer
Unlock3 details capturedBuyer · Address · Contact
Lots
Unlock1 detail capturedLots LOT-0001
Procedure data
Unlock5 details capturedPublication number · Procedure reference · Procedure type · Contract type · +1 more
Performance locations
Unlock3 details capturedPerformance locations
Publisher
Unlock3 details capturedPublisher · Address · Contact
Related tenders
9ELECTRIC WHEEL LOADER
Remiks Husholdning ASTromsøDeadline: Aug 31The contracting authority shall procure a factory new electric wheeled loader in the middle class, designed for daily operation at waste and recycling facilities. The machine shall be versatile, compact and have sufficient lifting and loading capacity for efficient handling of different waste fractions, containers and other materials. It shall be able to be used both outdoor and indoor, have emission free electrical operation, low noise level and be adapted to frequent use with various tools via hydraulic quick coupling. The machine shall be delivered complete with the necessary standard equipment and accessories so that it is ready for use when delivered.Purchase of an electric tractor for Hvam VGS
Anskaffelser i Akershus, Buskerud og Østfold KODrammenDeadline: Aug 12Anska shall, on behalf of Hvam VGS, procure an electric tractor with the accompanying ongoing service, operation and maintenance agreement on an option. This is to be seen as a single goods procurement with the accompanying ongoing service contract for 5 years.Tender for Electric Utility Vehicle for Moate Town Team CLG
Westmeath County CouncilMullingarDeadline: Sep 07Procurement Short Description Supply, delivery, commissioning and handover of one Electric Utility Vehicle with high-capacity towing and cargo carrying capability for use in community maintenance, environmental improvement and public realm works within Moate, County Westmeath. Procurement Detailed Description Moate Town Team CLG invites tenders for the supply, delivery, commissioning and handover of one Electric Utility Vehicle suitable for community maintenance and environmental improvement works. The proposed vehicle shall be road legal, fully electric and capable of towing a minimum of 2,000kg on public roads and up to 4,500kg in off-road or private land environments. The vehicle must also be capable of safely carrying a water tank assembly and associated operational equipment used for public planting and maintenance works. Tenderers are required to provide a complete vehicle solution including all accessories, safety equipment, anti-roll or load stability enhancements, documentation, commissioning and operator familiarisation where applicable. The contract will be awarded on the basis of the Most Economically Advantageous Tender (MEAT) in accordance with the published award criteria.Market survey for the publication of a licence period for renting small electric vehicles on public ground in Oslo municipality.
Oslo kommune v/ BymiljøetatenOsloDeadline: Aug 15The Agency for Urban Environment would like to invite market participants who rent "free flow" shared electric bicycles and electric scooters to a market survey. The aim of the invitation is to gain general insight about the interest and the possibility the market has to offer electric bicycles in combination with electric scooters to ensure that the criteria in the next notice are in line with what the market can offer and the city wants. We would particularly like concrete feedback on free floating e-cycles that are not offered in Oslo in the current period. Currently Oslo offers two different offers of micromobility; the permission scheme for small electric vehicles (electric scooters and electric bicycles) and a separate contract with Oslo bysykkel. The licence scheme is a free flow scheme with 2 years duration and is open for companies with permission to have both electric bikes and electric scooters. In the current period, only electric scooters are offered from the companies that have permission in Oslo. Oslo Bysykkel offers fixed installations of electric bicycles and regular bicycles within ring 3 and is a contract that lasts until 2030. The current permit for small electric vehicles allows companies to place a total of 16,000 vehicles that are distributed equally between three companies. There are 5,334 vehicles for each company. The distribution of vehicles will be distributed in 4 zones that are regulated in the local regulations. In zones 1, 2 and 3, the companies have the possibility to deploy 8,000 vehicles (inner town), the remaining 8,000 can be placed in zone 4 (outer town). Of the 8,000 vehicles that can be placed within zone 3, there is a maximum of 3,200 vehicles in zone 3, 3,200 vehicles in zone 2, and 1,200 vehicles in zone 1. In 2025, more than 20 million trips were carried out, and a further increase is expected by the end of 2026. On average, the trips last with electric scooters in Oslo about 7 minutes, which makes up a distance of about 2 kilometres in the airline. The Agency for Urban Environment would like the tender to be developed in a safe and good way with the city ́s needs and that as many people as possible use the offer in the city. We would therefore like the market to give feedback on the following questions: 1. There should be some concrete changes in the design of questions from the previous notice period 2025-27 (see the annex). 2. Should the next notice also include electric bicycles and which segments can electric bicycles attract that do not electric scooters hit? 3. Previous experience gave electric bikes challenges in the urban area. Are the current e-cycles offered by the market small enough and adapted to confined urban spaces? 4. What does the market think about requirements for the size and length of the bicycles (wheel size in inches, length in cm)? 5. If a limit shall be set on the size of the e-cycles. What is the smallest size of e-cycles in the market and what size is recommended in Oslo? 6. Should there be a minimum and maximum number of e-cycles and how should it be distributed in the zones? 7. Fees have been preventive in order to avoid repeated parking errors. The municipality has no way of doing the same with electric bikes. How do companies solve the parking challenges that arise with electric bikes? 8. What is the market ́s attitude in general to forced parking in the city centre and forced parking only for electric bikes in other local centres and areas with high use? 9. What type of new technology can the market offer that contributes to safer urban transport with many walking, especially on pavements, parks, public urban areas etc.? Give examples. 10. Do you have anything else you would like to comment on or give feedback on? The Agency for Urban Environment reserves the right to select feedback and the right to not take into account input that is not relevant for the pending announcement. This is done in order to avoid disproportionate work with the received inputs. The Agency for Urban Environment selects relevant input from the feedback based on capacity, need, wants and professional assessment. Due to staff holidays, questions asked from interested parties will not be answered until after 3 August. A deadline is set for 18 August to ask questions to the market dialogue, and questions received after this cannot be answered. The deadline for submitting feedback and replying to the questions posed in the market dialogue is set at 25 August. A summary of the received input will be prepared. Input that the Agency for Urban Environment does not consider relevant for the pending announcement will not be included in the summary.DoV mid Framework agreement electric tavern 2026 - 2027 + 1+1
Statens vegvesenMossDeadline: Aug 14The procurement is for a framework agreement for improvement and minor construction work in Møre og Romsdal and Trøndelag. The work can be both establishment of new installations and/or upgrading/maintenance of existing installations. The procurement shall ensure that the contracting authority can carry out minor construction work on a resource efficient way. The contracting authority would like parallel framework agreements with up to 3 contractors per area.Maintenance of electric propulsion system
Fjársýsla ríkisinsReykjavíkPreventive maintenance of the electric propulsion system of the research vessel Árni Friðriksson during the 2026. The procurement covers: Maintenance of the converters (SD7000), transformers, propulsion motors, and switchboard, together with associated spare parts (coin cell batteries, fan capacitors, earth brushes). The scope should include manpower, engineering, project and fleet management, mobilization/demobilization, travel and reporting. Specific maintenance tasks for 2026, including firmware upgrade of Hirschmann RS20 switches to the latest release, converter measurement and protection checks, transformer SFRA tests, switchboard protection relay tests by injection, converter fibre optical cable intensity checks, dry transformer torque tightening, bearing inspections of motors/generators, jacking unit tests, and harmonics filter LV relay injection. Replacement of harmonic filter capacitors — 11 capacitors manufactured to the original GE Vernova design specifications (4BZ80303/80305/80307/80309), together with onboard service to replace the capacitors and restart the system.Circulating Water System Intake Equipment Package
BECHTEL POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄGdanskDeadline: Aug 16The scope of work for this package consists of, but is not limited to, designing, furnishing material, fabricating, testing, and delivering complete and fully operational equipment, detailed as: a. Twenty-four (24) automatic dual flow type traveling water screens b. Thirty-three (33) trash racks c. Six (6) motorized trash rack raking systems with associated monorail and support d. structures. Two (2) raking systems per unit where each rake covers six (6) or five (5) trash racks e. Two (2) intake tunnel stop gates (1 per tunnel). Nine (9) circulating water pump suction stop gates. The traveling screens shall be designed for continuous, submerged service in brackish Baltic seawater to support a cooling water intake structure with a depth of 23m. Design conditions for Baltic Sea chloride concentration will be considered and specified further in the RFQ Package. There shall be material selection consideration to exposure conditions such as stagnation, biofouling, mussel formation, and frazil ice formation. NOTE: The quantities and dimensions provided above are APPROXIMATE only. The intent is to give bidders an idea of the scale of the project. Actual quantities and dimension numbers will be included in official bid package. Deadline (Pre-qualification Submittal): August 2026 (Forecast – Subject to change); RFQ Document Issuance: November 2026 (Forecast – Subject to change); Supplier Proposals Due: January 2027 (Forecast – Subject to change); Order Award Date: April 2027 (Forecast – Subject to change) * After completion of the design submittals, the company is placed on hold until release for fabrication. The timing of the release is based on required fabrication and delivery lead times. Required On Site Date: Unit 1: July 2032 (Forecast – Subject to change) Unit 2 & 3 will be further detailed in the RFQ package. Additional delivery schedule information will be provided in the RFQ PackageProcurement of an electric wheeled excavator
DRAMMEN KOMMUNEDRAMMENDeadline: Jul 23Drammen municipality, water and sewage shall procure a new electric wheeled excavator with additional equipment. The procurement also includes an accompanying service contract. See further descriptions of the delivery in the contracting authority ́s tender documentation and annexes.Delivery of 8 zero-emission electric buses with mobile charging stations
Municipality of the City of DębicaDębicaDeadline: Aug 271. The delivery of 8 brand-new electric buses for public urban transport, low-floor, as well as the delivery of equipment, including mobile chargers enabling the charging of energy storage systems in the delivered electric buses; 2. Providing warranty service for the subject of the order and related training and service equipment indicated in accordance with the requirements of the Terms of Reference and the Warranty Service Conditions.
Frequently asked questions about this tender
- How can I apply for this tender?
- Create a free account on Auftrag One. You will then see all documents, deadlines and submission notes in a structured workflow.
- What is the submission deadline?
- The submission deadline is 19. August 2026.
- Who is the contracting authority?
- The contracting authority is BECHTEL POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ,.
- Which documents are needed to get started?
- Typically you need the service description, proof of eligibility, deadline notes and possibly form sheets. On Auftrag One these items are displayed in prioritized order.